MRTG question
I delay a little to accomplish installing MRTG to analyze my router(s) , but all graphs I generate , are with the same draw.
And are showing 0 Kb/s . I don't know if I monitoring the wrong interface or similar mistake. I tried using by command line, not inserting at the cron. Can someone tell me what is wrong . Thanks, |
Quote:
|
Quote:
Don't ask me where I gave it, it's there's 4 threads all stemming from your lack of understanding of the basic client-server model in a computing environment. I don't mean to be mean, but are you up to this task? Try going through Centos Install and Configure MRTG for clues. http://bfy.tw/6do1 |
I will reply you two in 15 minutes .
Thanks. |
TB0ne
No error messages appear since 2 days ago. All previous are uppon SNMP connection. I have installed mrtg using yum command. Habitual: I will read the info you sent, but I don`t think is an installation issue. The reason: The graphs are been generated, but they have an empty content. Thanks , |
Quote:
Quote:
|
Your response
I am not sure of your tip: Removing e reinstalling. This is a Windows solution, not UNIX .
But even so,I Am not there. Here is 8pm and I will be back only tomorrow morning The MRTG runs without error and it makes some graphs, but are empty today and I must do this task in about 10 days . Thanks, |
Quote:
Quote:
|
Quote:
7 posts to find out it's Windows? Are you sure it's Windows? You're not sure of anything, IMO. "Unix"? You're all over the map. "tomorrow morning"? Fries with that? So you have 09 days to grind it out. I'm done trying to help you. You don't answer questions. You don't know what the software is doing. You don't know what you are doing. I have to stop myself here, If I don't it will reflect poorly for Jeremy and LQ. If it were me, I'd check the snmp data communication with an snmpwalk. End Transmission. Nothing personal. |
Answers
The snmpwalk are working in my two communities like I said before.
There are no erros. The application rans fine, but the graphs are with 0Kb/s. Any more question ? Quote:
|
Quote:
I'm done trying to get you to listen and answer questions too. Good luck...maybe there's someone else at your company who can do this for you. |
Hi Mr Josiah wrote:
wjerikson@hampshire.edu What I mean is, they will always be 0 on the first poll, because it's polling counters. It saves data locally as to what was in the counters. So you have to put it in cron to get actual data. Or run it manually every five minutes or so all day, which sounds un-fun :) ��� -Josiah I will do it on Monday. If it works, I will close this thread. Thanks everyone |
A little birdie tells me you'll need http://www.cronsandbox.com/
|
I put ]
*/5 * * * * mrtg env LANG=C /usr/bin/mrtg /root/mrtg_netcomro.cfg But only runs when I type by hand. What is wrong ? Thanks |
Quote:
http://oss.oetiker.ch/mrtg/doc/mrtg-unix-guide.en.html There is a WRITTEN EXAMPLE of what to put in cron, and it sure doesn't match what you have. If you can't read/understand/follow simple instructions, there's no point in posting questions. Installing and configuring mrtg should take about 30 minutes, at most. You've been at it for WEEKS now...because you're not reading or following the instructions, taking advice, or answering questions. Please, get someone else at your company, who actually can DO THOSE THINGS, to install this. Or get "Mr Josiah" to do it... |
All times are GMT -5. The time now is 01:30 AM. |