IPCop to IPCop VPN...
Hello Everybody,
I need some help (please)... I am trying to get 2 IPCops to VPN but am experiencing difficulties :-( On the VPN page of both, I see this: - Name Status furrie (10.7.0.0/24) CLOSED On my box, I have input the IP of the ppp interface (213.208.115.165) into the Global settings... I have left the other boxes Global Settings empty so it will take the Red (eth1) IP. Left-hand VPN parameters: furrie (My IPCop) Red Network IP address (left): 213.208.115.165 Firewall Gateway Address (left next hop): 195.149.20.11 VPN connected network/netmask (left subnet): 10.7.0.0/24 Right-hand VPN parameters: stelararrow (The Other IPCop) Red Network IP address (right): 80.192.7.54 Firewall Gateway Address (right next hop): 80.192.7.1 VPN connected network/netmask (right subnet): 10.7.2.0/24 SECRET: ******************************** (I have made sure that this is identickle *giggles* by cutting and pasting it) *** My IPCop Box *** root@valhalla~$netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 195.149.20.11 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 195.149.20.11 0.0.0.0 255.255.255.255 UH 0 0 0 ipsec0 10.7.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 195.149.20.11 0.0.0.0 UG 0 0 0 ppp0 VPN Service is "RUNNING" eth0 Link encap:Ethernet HWaddr 00:80:5A:13:CB:61 inet addr:10.7.0.1 Bcast:10.7.0.255 Mask:255.255.255.0 (LAN) UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:56898 errors:0 dropped:0 overruns:0 frame:0 TX packets:50465 errors:0 dropped:0 overruns:0 carrier:0 collisions:1015 txqueuelen:100 RX bytes:6975562 (6.6 Mb) TX bytes:27248108 (25.9 Mb) Interrupt:10 Base address:0xecc0 ppp0 Link encap:Point-to-Point Protocol inet addr:213.208.115.165 P-t-P:195.149.20.11 Mask:255.255.255.255 (USB- UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 ADSL) RX packets:10366 errors:0 dropped:0 overruns:0 frame:0 TX packets:10376 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 RX bytes:1508944 (1.4 Mb) TX bytes:393555 (384.3 Kb) ipsec0 Link encap:Point-to-Point Protocol inet addr:213.208.115.165 Mask:255.255.255.255 (VPN) UP RUNNING NOARP MTU:16260 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) *** The Other IPCop Box *** root@ipcop~$netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 80.192.7.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 80.192.7.0 0.0.0.0 255.255.255.0 U 0 0 0 ipsec0 10.7.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 80.192.7.1 0.0.0.0 UG 0 0 0 eth1 VPN Service is "RUNNING" eth0 Link encap:Ethernet HWaddr 00:80:5A:12:91:5C inet addr:10.7.2.1 Bcast:10.7.2.255 Mask:255.255.255.0 (LAN) UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:59465 errors:0 dropped:0 overruns:0 frame:0 TX packets:47733 errors:0 dropped:0 overruns:0 carrier:0 collisions:2042 txqueuelen:100 RX bytes:5736762 (5.4 Mb) TX bytes:21134308 (20.1 Mb) Interrupt:5 Base address:0xecc0 eth1 Link encap:Ethernet HWaddr 00:10:A7:08:54:C2 inet addr:80.192.7.54 Bcast:255.255.255.255 Mask:255.255.255.0 (Cable) UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1 RX packets:235179 errors:0 dropped:0 overruns:0 frame:0 TX packets:60637 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:31381901 (29.9 Mb) TX bytes:7479253 (7.1 Mb) Interrupt:10 Base address:0xe800 ipsec0 Link encap:Ethernet HWaddr 00:10:A7:08:54:C2 inet addr:80.192.7.54 Mask:255.255.255.0 (VPN) UP RUNNING NOARP MTU:16260 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) *** Well, if I've missed anything, please let me know ;-) Hopefully, some eagle-eyed dude will make me feel a bit silly and point out my mistakes!!! I am a Technical Support Engineer for www.intY.net (with plenty to learn, obviously), should anyone be interested... Thanks in advance for everyones patience while reading this. Cheers! Chris Phillips (furrie) |
IPCop to IPCop VPN...
Hi!
I'm no expert neither, but I have it "running" too.... not with /all/ the success I'm wishing fot, but well.....I can reach the other distant subnet using ping. ;) (Computer)NameResolution doesnt work yet... ;) But I thought abut one thing while reading your Post: You wrote: ... On my box, I have input the IP of the ppp interface (213.208.115.165) into the Global settings... I have left the other boxes Global Settings empty so it will take the Red (eth1) IP. Left-hand VPN parameters: furrie (My IPCop) Red Network IP address (left): 213.208.115.165 Firewall Gateway Address (left next hop): 195.149.20.11 VPN connected network/netmask (left subnet): 10.7.0.0/24 Right-hand VPN parameters: stelararrow (The Other IPCop) Red Network IP address (right): 80.192.7.54 Firewall Gateway Address (right next hop): 80.192.7.1 VPN connected network/netmask (right subnet): 10.7.2.0/24 ... I dont know wheather you have a real fixed Global-IP, but unless you have, you'll get throuble with you dynamic ip. I worked around while using dyn.dhs.org along with the appriopiate settings in IPCop in the DynDNS section. Also make shure you have IPCop#1 and IPCop#2 fed with the SAME parameters on each. wish u some success with your VPN, the rest I use for mine... ;) thanx for reading. Santigua |
All times are GMT -5. The time now is 09:25 PM. |