how to create a different subnet ?

dimgr · 03-11-2007, 02:12 PM

I want to have my access point on a different subnet. How do i create it ? Thanks

my lan looks like this :

mode - router - switch - 1pc 2 pc 3 pc access point ( all 4 connected onto the switch)

thanks

acid_kewpie · 03-11-2007, 04:32 PM

you can route multiple subnets on a router without tagging, assuming that the router is a linux based router then you'd just add an extra ip on a seperate subnet on the same interface. if the linux router is routing, then implicitly, routing between those two subnets will be enabled.

vargadanis · 03-11-2007, 08:19 PM

Subnetting is not the simplest thing ever. I is taught in CCNA1 for Network+ industrial certificate. And then the ACL thing that you might want to use (logically) is in CCNA4. If you really want to dig into these things:
http://www.cisco.com/warp/public/701/3.html
Otherwise this is simpler:
http://www.ralphb.net/IPSubnet/