I'm having the devices looking as this instead of the normal eth[0....n]. Can anybody help in this?

bond0 Link encap:Ethernet HWaddr 00:0E:0C:6E:20C
inet addr:192.168.200.38 Bcast:192.168.200.127 Mask:255.255.255.128
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:106654 errors:0 dropped:0 overruns:0 frame:0
TX packets:159398 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9027996 (8.6 Mb) TX bytes:19994754 (19.0 Mb)

dev11578 Link encap:Ethernet HWaddr 00:09:3D:14:99:11
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:26

dev17801 Link encap:Ethernet HWaddr 00:0E:0C:6E:20F
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Base address:0x60c0 Memory:fe160000-fe180000

eth0 Link encap:Ethernet HWaddr 00:09:3D:14:99:10
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:25

To be precise you seems to have 3 ethernet cards & you have done bonding b/w eth0 & dev11578. Can you please post the output of your network scripts.

ifcfg-eth2

# Intel Corporation|82546EB Gigabit Ethernet Controller
TYPE=Ethernet
DEVICE=eth2
HWADDR=00:0E:0C:6E:20C
BOOTPROTO=none
ONBOOT=yes
MASTER=bond0
SLAVE=yes
USERCTL=no
PEERDNS=yes
ETHTOOL_OPTS="speed 1000 duplex full autoneg on"

ifcfg-eth5

# Intel Corporation|82546EB Gigabit Ethernet Controller
DEVICE=eth5
ONBOOT=no
BOOTPROTO=none
HWADDR=00:0E:0C:6E:20F
TYPE=Ethernet

The dev#### doesn't have files and there is actually 10 interfaces there and the affected are this only 2