LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Networking (https://www.linuxquestions.org/questions/linux-networking-3/)
-   -   Ethernet controller: Attansic Technology Corp. Device 2062 (rev c1) is not detected (https://www.linuxquestions.org/questions/linux-networking-3/ethernet-controller-attansic-technology-corp-device-2062-rev-c1-is-not-detected-907104/)

dorajeerao 10-08-2011 10:08 AM

Ethernet controller: Attansic Technology Corp. Device 2062 (rev c1) is not detected
 
Recently my pc mother board has failed. So I replaced it with G41D3c main board. It supported windows xp.
I have dual os. ubuntu 8.10.i386 is available. When I try to restart the system and go to ubuntu, the ethernet light on the modem is getting off. So I feel that ethernet card is not detected.
I followed the forum and tried to list the device as
"Ethernet controller: Attansic Technology Corp. Device 2062 (rev c1)"
I tried to install alt1c driver also but in vain.
Can any body help me in this regard.
dorajeerao

tredegar 10-08-2011 10:32 AM

Ubuntu 8.10 is out of date, and no longer supported. You need a more recent version Eg 11.04

dorajeerao 10-08-2011 11:00 AM

How do I get ubuntu 11.04.
Since I got windows xp connected to internet broad band, Whether it will be of any use in this matter. How to do it.
- dorajeerao

tredegar 10-08-2011 11:08 AM

Quote:

How do I get ubuntu 11.04.
http://www.ubuntu.com/download/ubuntu/download

And follow the instructions....

dorajeerao 10-19-2011 11:12 AM

problem is not solved
 
Quote:

Originally Posted by tredegar (Post 4493188)
http://www.ubuntu.com/download/ubuntu/download

And follow the instructions....

How to solve the problem and get connected to internet
dorajeerao

jschiwal 10-22-2011 11:44 AM

You could download the CD or DVD image in XP, then burn the image to a disc. Perhaps to save time, see if there is a net install image. It will be only a few megabytes, and if your ethernet device works with the netinstall image, it should work after installation.

In the meantime, if you could run in Ubuntu the commands "lspci -v" and "lspci -n" and post the information about your network device, we might be able to tell what kernel device is used, and if firmware is needed. Your device might not be supported by your kernel. Especially if the device was released after your version of Ubuntu. Upgrading Ubuntu would be an easy way to also upgrade the kernel.

dorajeerao 10-25-2011 09:38 AM

The following is the outcome for the command
lspci -n
00:00.0 0600: 8086:2e30 (rev 03)
00:02.0 0300: 8086:2e32 (rev 03)
00:1b.0 0403: 8086:27d8 (rev 01)
00:1c.0 0604: 8086:27d0 (rev 01)
00:1c.1 0604: 8086:27d2 (rev 01)
00:1d.0 0c03: 8086:27c8 (rev 01)
00:1d.1 0c03: 8086:27c9 (rev 01)
00:1d.2 0c03: 8086:27ca (rev 01)
00:1d.3 0c03: 8086:27cb (rev 01)
00:1d.7 0c03: 8086:27cc (rev 01)
00:1e.0 0604: 8086:244e (rev e1)
00:1f.0 0601: 8086:27b8 (rev 01)
00:1f.1 0101: 8086:27df (rev 01)
00:1f.2 0101: 8086:27c0 (rev 01)
00:1f.3 0c05: 8086:27da (rev 01)
02:00.0 0200: 1969:2062 (rev c1)
Can u please suggest the solution to make ethernet controller to blink light on modem
dorajeerao

dorajeerao 10-25-2011 10:08 AM

And the outcome for the command lspci -v is as below

outcome for lspci -v
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
Subsystem: Intel Corporation 4 Series Chipset DRAM Controller
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>

00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
Subsystem: Biostar Microtech Int'l Corp Device 3103
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fe400000 (64-bit, non-prefetchable) [size=4M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
I/O ports at dc00 [size=8]
Capabilities: <access denied>

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
Subsystem: Biostar Microtech Int'l Corp Device 810a
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at feaf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
Subsystem: Biostar Microtech Int'l Corp Device 3103
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
Subsystem: Biostar Microtech Int'l Corp Device 3103
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
Subsystem: Biostar Microtech Int'l Corp Device 3103
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
Subsystem: Biostar Microtech Int'l Corp Device 3103
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20)
Subsystem: Biostar Microtech Int'l Corp Device 3103
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at feaf7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
Subsystem: Biostar Microtech Int'l Corp Device 3103
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Biostar Microtech Int'l Corp Device 3103
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix

00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Biostar Microtech Int'l Corp Device 5202
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at d080 [size=8]
I/O ports at d000 [size=4]
I/O ports at cc00 [size=8]
I/O ports at c880 [size=4]
I/O ports at c800 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
Subsystem: Biostar Microtech Int'l Corp Device 3103
Flags: medium devsel, IRQ 5
I/O ports at 0400 [size=32]
Kernel modules: i2c-i801

02:00.0 Ethernet controller: Attansic Technology Corp. Device 2062 (rev c1)
Subsystem: Biostar Microtech Int'l Corp Device 2801
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at febc0000 (64-bit, non-prefetchable) [size=256K]
I/O ports at ec00 [size=128]
Capabilities: <access denied>

Can u please suggest me how to make my ethernet controller to work.
This problem arised only after changing my motherboard on account of its disability. Net is working on XP platform

dorajeerao

dorajeerao 11-03-2011 10:58 AM

can't any body help me in this regard


All times are GMT -5. The time now is 05:41 PM.