Dlink DVC-1000 passthru Linux?

valnar · 10-03-2005, 05:53 AM

Has anyone managed to make a standard IP Tables w/NAT (ie. Linux Firewall) work with the Dlink DVC-1000 or DVC-1100 videocam? I can get it to work via the public IP address and appropriate port forwarding on any firewall in existence (Sonicwall, Cisco, Dlink, etc.) but a Linux firewall. I have the same problem with any current or hacked firmware for the Linksys WRT54G, which is also based on Linux.

Public IP --> Linux firewall eth1 --> NAT to eth0 --> internal IP on DVC-1000.

-Robert

mikedeatworld · 10-03-2005, 09:46 AM

i dont think linux is the problem...

can explain your issue a little more? more information...

valnar · 10-03-2005, 10:30 AM

http://myweb.cableone.net/jimjoh/dvc1100wrt54g.htm

The link above outlines the problem on the Linksys WRT54G which is where I want it to work, but the problem also exists in Linux in general. I used "Linux" as my subject header simply because this is a Linux forum. It's my understanding this is a common problem, so I'm very interested in a reply from a DVC-1x00 user. Have you made it work through any Linux NAT with port forwarding?

I have the exact same problems the user above (link) has.

-Robert