Hi
I have a problem with Diald 0.99.4 on RH 6.0 It trigged by a pop3 client I my LAN 192.168.1.12 and it is accessing the pop-server 195.163.107.10. Everything is going OK. The link goes up and the POP client thus what I should and stops sending. The link goes down due idle and everything seems OK BUT a couples of minutes later DIALD gets trigged by a packet. Here it starts --------------- Nov 26 20:33:34 Server_L1 diald[1097]: Trigger: tcp 192.168.1.12/1501 195.163.107.10/110 Nov 26 20:33:34 Server_L1 diald[1097]: Calling site 195.100.22.22 Nov 26 20:33:36 Server_….. <cut> Nov 26 20:43:44 Server_L1 diald[1097]: Closing down idle link. Nov 26 20:43:46 Server_L1 pppd[10930]: Terminating on signal 2. Nov 26 20:43:46 Server_L1 pppd[10930]: Connection terminated. Nov 26 20:43:46 Server_L1 pppd[10930]: Connect time 9.7 minutes. Nov 26 20:43:46 Server_L1 pppd[10930]: Sent 1182 bytes, received 1280 bytes. Nov 26 20:43:47 Server_L1 pppd[10930]: Exit. Nov 26 20:43:47 Server_L1 diald[1097]: Disconnected. Call duration 583 seconds. Nov 26 20:43:47 Server_L1 diald[1097]: IP transmitted 933 bytes and received 1101 bytes. Nov 26 20:43:47 Server_L1 diald[1097]: Closing /dev/ttyS1 Nov 26 20:43:48 Server_L1 diald[1097]: running ip-down script '/etc/sysconfig/network-scripts/pppfw_down 'sl0' '255.255.255.255' '195.100.23.13' '195.100.22.20'' Nov 26 20:43:48 Server_L1 diald[1097]: Delaying 5 seconds before clear to dial. << The link is down >> Nov 26 20:53:42 Server_L1 diald[1097]: Trigger: tcp 195.163.107.10/110 192.168.1.12/1501 Nov 26 20:53:42 Server_L1 diald[1097]: Calling site 195.100.22.20 Where have that packed 195.163.107.10/110 192.168.1.12/1501 been ? The link is down how than a packed arrive from “outside” and then brink up the link ? / Dan |
All times are GMT -5. The time now is 03:21 AM. |