Hi,

I have 2 different network. 192.168.1.0/24 and 192.168.2.0/24, I have 2 internet. 1 connected to 192.168.1.0 network and other connected to 192.168.2.0 network via 2 different cisco router.

I use a linux router in between to connect the two network.

The cisco router at 192.168.2.0 series has just newly purchased and here comes the difficulty.

Previously I used to connect to internet via 192.168.1.0 network cisco router.

All my DNS,and other servers are at 192.168.1.0 network.

Please help me in configuring this new network.

Scenario:

1. Both Office should connect to each other as it is.
2. Internal servers should connect as it is.
3. Only 192.168.2.0 series network should browse internet through new router instead of 192.168.1.0 network cisco router.
4. But all the local traffic request for 192.168.1.0 network by 192.168.2.0 network should be locally and not through cisco router.

Please help.

With Warm Regards
Ravi Ranjan

You'll need to change your default route on the machines in the .2 network to use the new Cisco router as their default route, then add a static route for 192.168.1.0/24 to use the Linux router as the gateway between the 2 subnets...