Hi, I have a Ubunutu fileserver that runs Ubuntu server 13.04 and kernel 3.8.0-23-generic. I have a problem that my NX1101 network card wont show up as a Eth0/1. When i do "ifconfid -a" it only shows up my eth0(onboard 100mbps ethernet) and lo. BUt when i do "lspci -v" this shows up:
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 10
I/O ports at e000 [size=256]
Memory at e3012000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 40000000 [disabled] [size=64K]
Capabilities: <access denied>
--no driver
and this is my eth0:
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
Subsystem: Micro-Star International Co., Ltd. Device 7142
Flags: bus master, medium devsel, latency 32, IRQ 23
I/O ports at ed00 [size=256]
Memory at e3011000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
--if any1 could help me I would be very thankful
