LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Networking
User Name
Password
Linux - Networking This forum is for any issue related to networks or networking.
Routing, network cards, OSI, etc. Anything is fair game.

Notices


Reply
  Search this Thread
Old 07-07-2005, 02:15 AM   #1
crmandal
LQ Newbie
 
Registered: Jul 2005
Posts: 2

Rep: Reputation: 0
adsl setup with eagle-usb, bridged ETH LLC, static IP


Hi

I am trying to setup my campus adsl connection, which is apparently
setup for bridged LLC mode of operation.

My modem is apparently operational. It was set up for "Encapsulation=00000001"
( #MPOA_MODE_BRIDGED_ETH_LLC ----> 1 )

But ethernet does not work, what to do next?
...

# eaglestat
eagle-usb status display
-------------------------------------------------------------
Driver version 2.2.0 Chipset: Eagle0
Vendor ID : 0x1110 Product ID : 0x9021 Rev: 0x500b
USB Bus : 001 USB Device : 004 Dbg mask: 0x0
Ethernet Interface : eth1
MAC: 00:30:0a:1f:34:d2
Tx Rate 864 Rx Rate 8128
FEC 0 Margin 10 Atten 12 dB
VID-CPE 0 VID-CO 28 HEC 0
VPI 8 VCI 35 Delin GOOD
Cells Tx 11 Cells Rx 139825
Pkts Tx 5 Pkts Rx 68606
OAM 4 Bad VPI 45 Bad CRC 1
Oversiz. 0

Modem is operational
---------------------------------------------------------------

# route add default gw 10.60.1.2 dev eth1
SIOCADDRT: Network is unreachable

# ping -c 8 -I eth1 10.14.0.2
PING 10.14.0.2 (10.14.0.2) from 10.16.11.80 eth1: 56(84) bytes of data.
From 10.16.11.80 icmp_seq=1 Destination Host Unreachable
From 10.16.11.80 icmp_seq=1 Destination Host Unreachable
From 10.16.11.80 icmp_seq=1 Destination Host Unreachable
From 10.16.11.80 icmp_seq=1 Destination Host Unreachable
ping: sendmsg: Operation not permitted
From 10.16.11.80 icmp_seq=2 Destination Host Unreachable
ping: sendmsg: Operation not permitted
From 10.16.11.80 icmp_seq=3 Destination Host Unreachable
ping: sendmsg: Operation not permitted
From 10.16.11.80 icmp_seq=4 Destination Host Unreachable
ping: sendmsg: Operation not permitted
From 10.16.11.80 icmp_seq=5 Destination Host Unreachable

--- 10.14.0.2 ping statistics ---
4 packets transmitted, 0 received, +8 errors, 100% packet loss, time 4038ms


What is going wrong?

Regards
Chitta
 
Old 07-08-2005, 02:43 AM   #2
TigerOC
Senior Member
 
Registered: Jan 2003
Location: Devon, UK
Distribution: Debian Etc/kernel 2.6.18-4K7
Posts: 2,380

Rep: Reputation: 49
I am not familiar with usb networking but just looking at the info you have posted , I have the following generic network comments. To use the network with a static address the network admin should have issued you with a static address (an essential) or else you are just guessing. Second thing is the gateway should be on the same subnet as your address. In the info you have given your eth1 address is 10.14.0.2 and you set the gateway to 10.60.1.2. These are completely different subnets. The gateway should be an address in the range 10.14.0.X. You would also need to specify the DNS resolution IP_address in /etc/resolv.conf.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
pf + Bridged ADSL + TPG + Netcomm NB1300 Gsee *BSD 5 10-03-2004 04:10 PM
Mandrake 10.1: "Please test Sagem ADSL modem (DHCP or static) with eagle-usb" Proud Mandriva 3 09-29-2004 03:17 PM
Verizon aDSL setup with static IP address RH9 server costasm Linux - Networking 1 10-16-2003 02:19 PM
ADSL Static IP setup in Slackware Nic Slackware 1 03-10-2003 05:12 PM
2 static IP addresses on 2 eth cards Zingaro2002 Linux - Networking 8 01-21-2003 12:16 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Networking

All times are GMT -5. The time now is 09:36 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration