LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Networking (https://www.linuxquestions.org/questions/linux-networking-3/)
-   -   3Com 3CCFE575BT configure! HELP! (https://www.linuxquestions.org/questions/linux-networking-3/3com-3ccfe575bt-configure-help-45160/)

khoing 02-12-2003 10:33 PM

3Com 3CCFE575BT configure! HELP!
 
Hi all,
I have a 3Com network card 3CCFE575BT that I am trying to configure on my Dell Inspiron 2500 notebook which runs RedHat 7.2 (kernel 2.4.9-34). Linux seems recognize the card and load the driver 3c59x, but I still can not log on the internet.
I tried to recompile the kernel with driver downloaded from pcmcia-cs.sourceforge.net but still can not solve the problem.

The messages in /var/log/messages said:

network: setting network parameters: succeeded
network: Bringing up interface lo: succeeded
kernel: Socket status: 30000006
kernel: cs: cb_alloc (bus 2): vendor 0x10b7, device 0x5157
kernel: PCI: Failed to allocate resource 0(4000-2fff) for 02:00.0
kernel: PCI: Failed to allocate resource 1(f4400000-f41fffff) for 02:00.0
kernel: PCI: Failed to allocate resource 2(f4400000-f41fffff) for 02:00.0
kernel: PCI: Failed to allocate resource 6(f4400000-f41fffff) for 02:00.0
kernel: PCI: Enabling device 02:00.0(20000->0003)
kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
kernel: 02:00.0: 3Com PCI 3CCFE575BT Cyclone Cardbus at 0x4000. Version LK1.1.16
kernel: Setting latency timer of device 02:00.0 to 64
cardmgr[806]: watching 2 sockets
kernel: cs: IO port probe 0x0c00-0x0cff: clean
kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x378-037f 0x4d0-0x4d7
kernel: cs: IO port probe 0x0a00-0x0aff: clean
pcmcia: cardmgr[806]: watching 2 sockets
cardmgr[825]: starting, version is 3.1.34
pcmcia: done
cardmgr[825]: socket 0: Cardbus hotplug device
rc: Starting pcmcia: succeeded
kernel: eth0: command 0x5800 did not complete! Status=0xffff
kernel: eth0: command 0x2804 did not complete! Status=0xffff
xinetd: xinetd startup succeeded
kernel: eth0: command 0x3002 did not complete! Status=0xffff
xinetd[908]: xinetd version 2.3.7 started with libwrap options compiled in
xinetd[908]: Started working: 4 available services
...
I have no idea about the problem and how to fix it. Please HELF!
KN


All times are GMT -5. The time now is 09:04 AM.