Hi,

I am working on AM1808 platform, and it is our customized board. Boot loader is placed at the 8MB SPI flash, and running our Kernel uImage & rootfs from SD-Card.

The Problem is suddenly while working our device it gets hang. at that time LCD becomes dark, and no console access via UART.

We couldn’t able to predict what is the issue why it gets hangs? For finding this issue, whether the processor & sdcard is running or not we tested with one small code which we have run RTC time script writing for every 10 secs on to the file format that have created at the sdcard

This program is running at the background. It is running and written as a file till no hangs.

When the system gets hang we waited for 15 minutes noted the hang time, then we get the rtc file in sdcard and checked it seems the rtc time written at the till hang time only. That means we confirmed that the processor is in idle and no OS is running & no App running from sdcard.

That’s why it becomes idle. I would like to know why suddenly my processor gets hangs. Any suggestions. This is not happening continuously, may it happen after 15 minutes or 1 hour or 5 hours, after the system start up.


The peripherals used in this product:-

AM1808 @456MHZ

TFT 18-Bit LCD with touch

8MB Flash

64MB mDDR

4GB SD-Card

GPS Module Uart based

Qwerty Keypad

USB 1.1

Battery Operated (7.4V, 2200mAh)

Cross-posting is against the LQ rules. Please post your thread in only one forum. Posting a single thread in the most relevant forum will make it easier for members to help you and will keep the discussion in one place.

Continue in the other/original thread: https://www.linuxquestions.org/quest...me-4175477827/

Reported for closure.