Hi

I running Auditor and need help with my Proxim 8470-WD card. My onboard nic and intel 2915 wireless are working. My card isn't being detected when I "iwconfig" "dmesg" or with "lspci" any suggestions?? here's some outputs:

lspci: with the card in

root@auditor:~# lspci
0000:00:00.0 Host bridge: Intel Corp. Mobile Memory Controller Hub (rev 03)
0000:00:01.0 PCI bridge: Intel Corp. Mobile Memory Controller Hub PCI Express Port (rev 03)
0000:00:1b.0 0403: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d4)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0144 (rev a2)
0000:03:00.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
0000:03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
0000:03:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac)
0000:03:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04)
0000:03:03.0 Network controller: Intel Corp.: Unknown device 4223 (rev 05)



Dmesg: with card in

Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:03:01.0[A] -> GSI 17 (level, low) -> IRQ 209
Yenta: CardBus bridge found at 0000:03:01.0 [1043:1888]
Yenta: ISA IRQ mask 0x04b8, PCI irq 209
Socket status: 30000006
ACPI: PCI interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 201
Yenta: CardBus bridge found at 0000:03:01.1 [1043:1888]
Yenta: ISA IRQ mask 0x04b8, PCI irq 201
Socket status: 30000006
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 217
uhci_hcd 0000:00:1d.0: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 217, io base 0xe480
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
uhci_hcd 0000:00:1d.1: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 225, io base 0xe800
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
uhci_hcd 0000:00:1d.2: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 201, io base 0xe880
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
uhci_hcd 0000:00:1d.3: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 169, io base 0xec00
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 217
ehci_hcd 0000:00:1d.7: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 217, pci mem 0xfebfbc00
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ts: Compaq touchscreen protocol output
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 915GM Chipset.
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 256M @ 0x0
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
sk98lin: Network Device Driver v8.16.2.3
(C)Copyright 1999-2005 Marvell(R).
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
PrefPort:A RlmtMode:Check Link State
input: PC Speaker
ieee80211_crypt: registered algorithm 'NULL'
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.4
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI interrupt 0000:03:03.0[A] -> GSI 22 (level, low) -> IRQ 233
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x370-0x377 0x3b0-0x3df 0x400-0x41f 0x480-0x4bf 0x4d0-0x4d7
cs: IO port probe 0x100-0x4ff: excluding 0x170-0x177 0x370-0x377 0x3b0-0x3df 0x400-0x41f 0x480-0x4bf 0x4d0-0x4d7
cs: IO port probe 0x800-0x8ff: excluding 0x818-0x87f
cs: IO port probe 0x800-0x8ff: excluding 0x818-0x87f
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
cs: IO port probe 0x3000-0x7fff: excluding 0x33b0-0x33df 0x37b0-0x37df 0x3bb0-0x3bdf 0x3fb0-0x3fdf 0x43b0-0x43df 0x47b0-0x47df 0x4bb0-0x4bdf 0x4fb0-0x4fdf 0x53b0-0x53df 0x57b0-0x57df 0x5bb0-0x5bdf 0x5fb0-0x5fdf 0x63b0-0x63df 0x67b0-0x67df 0x6bb0-0x6bdf 0x6fb0-0x6fdf 0x73b0-0x73df 0x77b0-0x77df 0x7bb0-0x7bdf 0x7fb0-0x7fdf
cs: IO port probe 0x3000-0x7fff: excluding 0x33b0-0x33df 0x37b0-0x37df 0x3bb0-0x3bdf 0x3fb0-0x3fdf 0x43b0-0x43df 0x47b0-0x47df 0x4bb0-0x4bdf 0x4fb0-0x4fdf 0x53b0-0x53df 0x57b0-0x57df 0x5bb0-0x5bdf 0x5fb0-0x5fdf 0x63b0-0x63df 0x67b0-0x67df 0x6bb0-0x6bdf 0x6fb0-0x6fdf 0x73b0-0x73df 0x77b0-0x77df 0x7bb0-0x7bdf 0x7fb0-0x7fdf
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xa00-0xaff: clean.
usb 2-1: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
NET: Registered protocol family 17
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
eth0: network connection down
eth0: network connection up using port A
speed: 100
autonegotiation: yes
duplex mode: full
flowctrl: symmetric
irq moderation: disabled
scatter-gather: enabled
tx-checksum: enabled
rx-checksum: enabled
root@auditor:~#


My specs:Asus Z71V - The Desktop Warrior
Intel® Custom Notebooks Series
Asus Z71V 15.4" WXGA 1680x1050 display, 4-in-1 Card Reader
Pentium® M Processor 750 (1.86GHz) 2MB Cache, 533MHz FSB
1GB PC2-4200 DDR2-533 SO-DIMM Notebook Memory, Kingston
PCI Express NVIDIA 6600, 128MB
Notebook Hard Drive, 80 GB, 5400 RPM, 8 MB Cache
DVD/CD-RW Combo Drive for Asus Z71
AC 97 Modem and 10/100/1000 LAN
Intel Wireless Module "a/B/G" 2915
Proxim 8470-WD (Atheros)

Can anybody help me out here? Also wondering if those "Yenta Card Bridge" is write?

I have tried some of my friends cards that have different chips in them and get the same result.

I am not posting in the right forums

Patience, young one.