| Tap-Out |
11-19-2003 07:49 AM |
No Sound, Mandrake 9.1
G'day all,
I tried getting this Soundcard to work using RH9, with no luck at all, so I decided to switch over to Mandrake 9.1, and let me tell you, soundcard aside I much prefer MDK to RH hands down. But that's beside the point.
When I log in now I get the following message:
Code:
Sound server informational message:
Error while initializing the sound driver:
device /dev/dsp can't be opened (No such file or directory)
The sound server will continue, using the null output device.
So using the methods I discovered while fighting this thing in RH I did the following.
Code:
[tapout@localhost tapout]$ cat /proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Silicon Integrated Systems [SiS] 650 Host (rev 1).
Master Capable. Latency=64.
Non-prefetchable 32 bit memory at 0xe8000000 [0xebffffff].
Bus 0, device 1, function 0:
PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (rev 0).
Master Capable. Latency=99. Min Gnt=12.
Bus 0, device 2, function 0:
ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev 37).
Bus 0, device 2, function 5:
IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 0).
Master Capable. Latency=128.
I/O at 0x1000 [0x100f].
Bus 0, device 2, function 6:
Modem: Silicon Integrated Systems [SiS] 56k Winmodem (Smart Link HAMR5600 compatible) (rev 160).
Master Capable. Latency=173. Min Gnt=52.Max Lat=11.
I/O at 0x1400 [0x14ff].
I/O at 0x1080 [0x10ff].
Bus 0, device 2, function 7:
Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev 160).
Master Capable. Latency=173. Min Gnt=52.Max Lat=11.
I/O at 0x1c00 [0x1cff].
I/O at 0x1800 [0x187f].
Bus 0, device 3, function 0:
USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 15).
IRQ 11.
Master Capable. Latency=64. Max Lat=80.
Non-prefetchable 32 bit memory at 0xec000000 [0xec000fff].
Bus 0, device 3, function 1:
USB Controller: Silicon Integrated Systems [SiS] 7001 (#2) (rev 15).
IRQ 10.
Master Capable. Latency=64. Max Lat=80.
Non-prefetchable 32 bit memory at 0xec001000 [0xec001fff].
Bus 0, device 3, function 2:
USB Controller: PCI device 1039:7002 (Silicon Integrated Systems [SiS]) (rev 0).
Master Capable. Latency=64. Max Lat=80.
Non-prefetchable 32 bit memory at 0xec002000 [0xec002fff].
Bus 0, device 10, function 0:
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 16).
IRQ 11.
Master Capable. Latency=64. Min Gnt=32.Max Lat=64.
I/O at 0x2000 [0x20ff].
Non-prefetchable 32 bit memory at 0xec003000 [0xec0030ff].
Bus 0, device 11, function 0:
FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) (rev 0).
IRQ 10.
Master Capable. Latency=64. Min Gnt=2.Max Lat=4.
Non-prefetchable 32 bit memory at 0xec003800 [0xec003fff].
Non-prefetchable 32 bit memory at 0xec004000 [0xec007fff].
Bus 0, device 12, function 0:
CardBus bridge: PCI device 1524:1410 (ENE Technology Inc) (rev 0).
IRQ 5.
Master Capable. Latency=64. Min Gnt=192.
Non-prefetchable 32 bit memory at 0xeffff000 [0xefffffff].
Bus 1, device 0, function 0:
VGA compatible controller: PCI device 1039:6325 (Silicon Integrated Systems [SiS]) (rev 0).
IRQ 5.
Prefetchable 32 bit memory at 0xf0000000 [0xf7ffffff].
Non-prefetchable 32 bit memory at 0xec100000 [0xec11ffff].
I/O at 0x9000 [0x907f].
[tapout@localhost tapout]$ cat /proc/modules
ide-floppy 15708 0 (autoclean)
sd_mod 13132 0 (autoclean) (unused)
parport_pc 25320 1 (autoclean)
lp 8352 0 (autoclean)
parport 36256 1 (autoclean) [parport_pc lp]
nfsd 75184 8 (autoclean)
sr_mod 16952 0 (autoclean)
floppy 55964 0
af_packet 16296 2 (autoclean)
nls_iso8859-1 3516 2 (autoclean)
ntfs 77420 2 (autoclean)
supermount 15552 2 (autoclean)
ide-cd 33952 0
cdrom 32096 0 [sr_mod ide-cd]
ohci1394 19784 0 (unused)
ieee1394 49228 0 [ohci1394]
snd-pcm-oss 43748 0 (unused)
snd-mixer-oss 14520 0 [snd-pcm-oss]
snd-pcm 82080 0 [snd-pcm-oss]
snd-timer 19624 0 [snd-pcm]
snd 43204 0 [snd-pcm-oss snd-mixer-oss snd-pcm snd-timer]
soundcore 6852 0 [snd]
snd-page-alloc 8236 0 [snd-pcm]
8139too 17960 1
mii 3980 0 [8139too]
ide-scsi 11408 0
scsi_mod 106516 3 [sd_mod sr_mod ide-scsi]
usb-ohci 21320 0 (unused)
usbcore 76608 1 [usb-ohci]
rtc 8828 0 (autoclean)
ext3 62572 1
jbd 42568 1 [ext3]
[tapout@localhost tapout]$ cat /etc/modules.conf
probeall scsi_hostadapter ide-scsi
alias eth0 8139too
above i810_audio snd-pcm-oss
alias sound-slot-0 i810_audio
probeall usb-interface usb-ohci
alias ieee1394-controller ohci1394
above snd-intel8x0 snd-pcm-oss
[tapout@localhost tapout]$ rpm -qa | grep kernel
kernel-smp-2.4.21.0.13mdk-1-1mdk
kernel-2.4.21.0.13mdk-1-1mdk
kernel-pcmcia-cs-3.2.3-28296cl
[tapout@localhost tapout]$ rpm -qa | grep alsa
libalsa2-0.9.0-0.14rc7mdk
alsa-utils-0.9.0-0.8rc7mdk
libalsa-data-0.9.0-0.14rc7mdk
[root@localhost tapout]# modprobe -v snd-intel8x0
/sbin/insmod /lib/modules/2.4.21-0.13mdksmp/kernel/sound/core/seq/snd-seq-device.o.gz
/sbin/insmod /lib/modules/2.4.21-0.13mdksmp/kernel/sound/core/snd-rawmidi.o.gz
/sbin/insmod /lib/modules/2.4.21-0.13mdksmp/kernel/sound/drivers/mpu401/snd-mpu401-uart.o.gz
/sbin/insmod /lib/modules/2.4.21-0.13mdksmp/kernel/sound/pci/ac97/snd-ac97-codec.o.gz
/sbin/insmod /lib/modules/2.4.21-0.13mdksmp/kernel/sound/pci/snd-intel8x0.o.gz
/lib/modules/2.4.21-0.13mdksmp/kernel/sound/pci/snd-intel8x0.o.gz: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
modprobe: insmod /lib/modules/2.4.21-0.13mdksmp/kernel/sound/pci/snd-intel8x0.o.gz failed
# delete snd-ac97-codec
# delete snd-mpu401-uart
# delete snd-rawmidi
# delete snd-seq-device
modprobe: insmod snd-intel8x0 failed
So my next question would be where do I go from here? I'm stumped again. Any and all help is greatly appreciated.
Oh also in my Lilo boot options accessed through the MDK control ceneter, There are 2 check boxes: "Enable ACPI" and "Force No APIC". The "Enable ACPI" is checked, while the "Force No APIC" is NOT checked. Should they both be checked, neither checked or what?
Thanks again. |
