LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Laptop and Netbook (https://www.linuxquestions.org/questions/linux-laptop-and-netbook-25/)
-   -   gprs/umts connection with pppd (https://www.linuxquestions.org/questions/linux-laptop-and-netbook-25/gprs-umts-connection-with-pppd-727103/)

swake 05-19-2009 01:19 PM

gprs/umts connection with pppd
 
Hi all.

I'm using a embedded ARM9 device and the UMTS/GPRS USB Modem MD300 from Sony Ericsson. Unfortunately I'm still facing some problems with the connection which does fail... The pppd-log does say the following:

####################

Starting GPRS connect script
Setting APN
Dialing...
Serial connection established.
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/ttyACM0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x4d37b8ad> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x2 <accomp> <pcomp> <asyncmap 0x0> <magic 0xb4dcd12b>]
sent [LCP ConfAck id=0x2 <accomp> <pcomp> <asyncmap 0x0> <magic 0xb4dcd12b>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x4d37b8ad> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0x4d37b8ad]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
Hangup (SIGHUP)
sent [CCP ConfReq id=0x1 <bsd v1 15>]
rcvd [LCP EchoRep id=0x0 magic=0xb4dcd12b]
ioctl(PPPIOCSASYNCMAP): Inappropriate ioctl for device(25)
tcflush failed: Input/output error

#################### the peer-file does look like this:

# File: /etc/ppp/peers/chtgprs
#
/dev/ttyACM0
115200
defaultroute
noipdefault
usepeerdns
noauth
modem
debug
logfile /var/log/ppp
lcp-echo-failure 4
lcp-echo-interval 65535
connect "/bin/chat -v -f /etc/chatscripts/chtgprs-connect"

#################### and here the used chatscript:

# File: /etc/chatscripts/chtgprs-connect
#
TIMEOUT 10
ABORT 'BUSY'
ABORT 'NO ANSWER'
ABORT 'ERROR'
SAY 'Starting GPRS connect script\n'

# Get the modem's attention and reset it.
"" 'ATZ'

# E0=No echo, V1=English result codes
OK 'ATE0V1'

# Set Access Point Name (APN)
SAY 'Setting APN\n'
OK 'AT+CGDCONT=1,"IP","gprs.swisscom.ch"'

# Dial the number
ABORT 'NO CARRIER'
SAY 'Dialing...\n'
OK 'ATD*99***1#'

CONNECT ''

####################

Beside the APN no username or password are necessary for a connection with this provider (I tested this with other devices).

Can anyone see the problem looking at the log-messages?

Thanks,
swake


All times are GMT -5. The time now is 11:56 AM.