Quote:
Originally Posted by hazel
First it would be worth finding out what the kernel thinks of this drive. In Linux, the kernel manages all your hardware.
Plug it in, then open a terminal and type dmesg|tail -20. You will see the last 20 lines of the kernel's message ring in which it should report the new device, its usb vendor and device numbers, and the fact that it is a mass storage device made by Lexar. However, it won't be accessible to you until it has been mounted. Most modern distros mount plug-in devices in the /media folder tree. Often it's done automatically; all you have to do is go to the obvious mountpoint (for example it might be called /media/usb) in your file manager and click on it. But if the kernel doesn't recognise it, there's a problem with the drive.
|
Thanks Hazel here is the output from the dmesg|tail 29 command
stanlip@localhost ~]$ dmesg|tail -20
[351610.430698] usb 5-1: device not accepting address 7, error -71
[351610.544460] usb 5-1: new high-speed USB device number 8 using xhci_hcd
[351610.544619] usb 5-1: Device not responding to setup address.
[351610.750852] usb 5-1: Device not responding to setup address.
[351610.958696] usb 5-1: device not accepting address 8, error -71
[351610.958769] usb usb5-port1: unable to enumerate USB device
[352306.896263] usb usb3-port1: disabled by hub (EMI?), re-enabling...
[352306.896273] usb 3-1: USB disconnect, device number 79
[352307.154541] usb 3-1: new low-speed USB device number 80 using ohci-pci
[352307.313503] usb 3-1: New USB device found, idVendor=062a, idProduct=0001, bcdDevice= 0.00
[352307.313509] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[352307.321135] input: HID 062a:0001 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:062A:0001.004B/input/input87
[352307.321726] hid-generic 0003:062A:0001.004B: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:12.0-1/input0
[352313.160242] usb usb3-port1: disabled by hub (EMI?), re-enabling...
[352313.160249] usb 3-1: USB disconnect, device number 80
[352313.421379] usb 3-1: new low-speed USB device number 81 using ohci-pci
[352313.580508] usb 3-1: New USB device found, idVendor=062a, idProduct=0001, bcdDevice= 0.00
[352313.580513] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[352313.588439] input: HID 062a:0001 as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/0003:062A:0001.004C/input/input88
[352313.589097] hid-generic 0003:062A:0001.004C: input,hidraw0: USB HID v1.10 Mouse [HID 062a:0001] on usb-0000:00:12.0-1/input0
[stanlip@localhost ~]$
how would I mount this device (sorry I am really green at this stuff)