Mookait26 |
04-12-2024 11:44 AM |
Couldnt find an interrupt point, MX Linux is very slow
Hello!
I have installed MX Linux on my laptop, an Acer. At the same time also on a Toshiba laptop, both laptops previously had Linux Mint on them and everything was fine.
Now both are very slow and the mouse keeps hanging until the computer freezes completely after 30 minutes.
Error message on startup is: Couldt find an interrupt endpoint 1-2:1.1
And also something with Bios, but it's too fast, I can't read it that quickly. VMX disabled by Bios or something like that.
When I disconnect the mouse and external hard disk from the USB port, no error message appears, but the computer is still very slow.
Thank you for your help and thoughts.
Greetings Mookait26
Quick System Info:
Code:
System:
Kernel: 6.1.0-18-amd64 [6.1.76-1] arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-amd64 root=UUID=<filter> ro quiet splash
Desktop: Xfce v: 4.18.1 tk: Gtk v: 3.24.36 info: xfce4-panel wm: xfwm v: 4.18.0 vt: 7
dm: LightDM v: 1.26.0 Distro: MX-23.2_x64 Libretto October 15 2023 base: Debian GNU/Linux 12
(bookworm)
Machine:
Type: Laptop System: Acer product: Aspire E5-771 v: N/A serial: <superuser required>
Mobo: Acer model: EA70_HB v: Type2 - A01 Board Version serial: <superuser required>
UEFI: Insyde v: 1.05 date: 05/13/2014
Battery:
ID-1: BAT1 charge: 24.4 Wh (100.0%) condition: 24.4/48.9 Wh (49.8%) volts: 16.3 min: 15.2
model: AC14B8K type: Li-ion serial: <filter> status: full
CPU:
Info: model: Intel Core i3-4030U bits: 64 type: MT MCP arch: Haswell gen: core 4 level: v3
note: check built: 2013-15 process: Intel 22nm family: 6 model-id: 0x45 (69) stepping: 1
microcode: 0x26
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache: L1: 128 KiB
desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1625 high: 1900 min/max: 800/1900 scaling: driver: intel_cpufreq
governor: ondemand cores: 1: 1900 2: 1900 3: 800 4: 1900 bogomips: 15199
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: gather_data_sampling status: Not affected
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB
filling, PBRSB-eIBRS: Not affected
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel Haswell-ULT Integrated Graphics vendor: Acer Incorporated ALI driver: i915
v: kernel arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: eDP-1 empty: DP-1,HDMI-A-1
bus-ID: 00:02.0 chip-ID: 8086:0a16 class-ID: 0300
Device-2: Chicony HD WebCam type: USB driver: uvcvideo bus-ID: 2-7:4 chip-ID: 04f2:b469
class-ID: 0e02
Display: x11 server: X.Org v: 1.21.1.7 compositor: xfwm v: 4.18.0 driver: X:
loaded: modesetting unloaded: fbdev,vesa dri: crocus gpu: i915 display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1600x900 s-dpi: 96 s-size: 423x238mm (16.65x9.37") s-diag: 485mm (19.11")
Monitor-1: eDP-1 model: ChiMei InnoLux 0xae0d built: 2012 res: 1600x900 hz: 60 dpi: 105
gamma: 1.2 size: 388x219mm (15.28x8.62") diag: 446mm (17.5") ratio: 16:9 modes: 1600x900
API: OpenGL v: 4.6 Mesa 22.3.6 renderer: Mesa Intel HD Graphics 4400 (HSW GT2)
direct-render: Yes
Audio:
Device-1: Intel Haswell-ULT HD Audio vendor: Acer Incorporated ALI driver: snd_hda_intel
v: kernel bus-ID: 00:03.0 chip-ID: 8086:0a0c class-ID: 0403
Device-2: Intel 8 Series HD Audio vendor: Acer Incorporated ALI 8 driver: snd_hda_intel
v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9c20 class-ID: 0403
API: ALSA v: k6.1.0-18-amd64 status: kernel-api tools: alsamixer,amixer
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse status: active
2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Acer Incorporated ALI
driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 04:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: eth0 state: down mac: <filter>
Device-2: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter vendor: Foxconn
driver: ath9k v: kernel modules: wl pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 05:00.0
chip-ID: 168c:0036 class-ID: 0280
IF: wlan0 state: up mac: <filter>
Bluetooth:
Device-1: Foxconn / Hon Hai type: USB driver: btusb v: 0.8 bus-ID: 2-5:5 chip-ID: 0489:e078
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 3 state: up address: <filter> bt-v: 2.1 lmp-v: 4.1 sub-v: 1
hci-v: 4.1 rev: 3101
Info: acl-mtu: 1022:8 sco-mtu: 183:5 link-policy: rswitch hold sniff
link-mode: peripheral accept service-classes: rendering, capturing, object transfer, audio,
telephony
Drives:
Local Storage: total: 1.82 TiB used: 590.84 GiB (31.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10JPVX-22JC3T0 size: 931.51 GiB
block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter>
rev: 1A01 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Western Digital model: WD10JMVW-11AJGS1
size: 931.48 GiB block-size: physical: 512 B logical: 512 B type: HDD rpm: 5400 serial: <filter>
rev: 1049 scheme: MBR
Partition:
ID-1: / raw-size: 931.26 GiB size: 915.57 GiB (98.31%) used: 66.77 GiB (7.3%) fs: ext4
dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%) used: 274 KiB (0.1%) fs: vfat
dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 15 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: file size: 2 GiB used: 774.3 MiB (37.8%) priority: -2 file: /swap/swap
Sensors:
System Temperatures: cpu: 42.0 C mobo: N/A
Fan Speeds (RPM): N/A
Repos:
Packages: pm: dpkg pkgs: 2383 libs: 1318 tools: apt,apt-get,aptitude,nala,synaptic pm: rpm
pkgs: 0 pm: flatpak pkgs: 0
No active apt repos in: /etc/apt/sources.list
Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
1: deb http://deb.debian.org/debian bookworm-updates main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/debian.list
1: deb http://deb.debian.org/debian bookworm main contrib non-free non-free-firmware
2: deb http://security.debian.org/debian-security bookworm-security main contrib non-free non-free-firmware
Active apt repos in: /etc/apt/sources.list.d/mx.list
1: deb http://ftp.halifax.rwth-aachen.de/mxlinux/packages/mx/repo/ bookworm main non-free
Info:
Processes: 226 Uptime: 1h 8m wakeups: 2 Memory: 3.75 GiB used: 3.49 GiB (93.1%) Init: SysVinit
v: 3.06 runlevel: 5 default: graphical tool: systemctl Compilers: gcc: 12.2.0 alt: 12
Client: shell wrapper v: 5.2.15-release inxi: 3.3.26
Boot Mode: UEFI
|