Hi,

I am looking for some help and suggestion related to thinclient.I am using a NS geode processor thinclient which was previously running wince but at the later stage due to my interest on linux I am trying to use linux on that. The hardware configuration of the device are:

NS CX5530 Chipset
NS-Geode 300Mhz Fanless CPU
pc-133 64MB Integrated RAM
National NS9731716 Bit I/O
Compact Flash Ram Support 32MB.
The device is having a PCI Modem.

Can any one advice me which kernel I should use for this config or is there any readymade image available which I can directly flash in to my Flash(I am looking for an Desktop environment).

I have downloaded few tiny linux distribution which I am able to boot from usb(with normal desktop not with thinclient) but the same usb is not being detected in Thinclient to boot my OS.Even I tried to locate BIOS but its embedded bios setting.


It will be of very great help If any one suggest me some solution for this to proceed further.

Thanks in Advance

Please do not post the same thread in more than one forum. Picking the most relevant forum and posting it once there makes it easier for other members to help you and keeps the discussion all in one place.

http://www.linuxquestions.org/rules.php

Also, please use useful thread titles... you will get more help with a good title

Closed per acid_kewpie's comments...