ati IGP340M and dual head/xinerama display
Has anyone out there been able to get a dual head display mode or xinerama working properly with an ATI IGP340M video chipset? I am running Mandrake 10.1 on an HP ze4100 laptop. I am able to get both displays going in clone mode just fine with my external monitor at a higher 1280x1024 resolution, and the "Xinerama on" option seems to be recognized in the X11 log file without errors also. But dual heads or a 2 screen virtual desktop just does not work. Here is my x11 config file:
# File generated by XFdrake. # ********************************************************************** # Refer to the XF86Config man page for details about the format of # this file. # ********************************************************************** Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection Section "ServerFlags" #DontZap # disable <Crtl><Alt><BS> (server abort) AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching) EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux SubSection "extmod" Option "omit xfree86-dga" EndSubSection Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer Load "dri" # direct rendering Load "synaptics" # synaptic touchpad driver EndSection Section "DRI" Mode 0666 EndSection Section "InputDevice" Identifier "Keyboard1" Driver "keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "en_US" Option "XkbOptions" "" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Emulate3Buttons" "no" Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Synaptics Mouse" Driver "synaptics" Option "Protocol" "auto-dev" Option "Device" "/dev/psaux" Option "MaxSpeed" "0.12" Option "MinSpeed" "0.06" Option "BottomEdge" "4200" Option "SHMConfig" "on" Option "LeftEdge" "1700" Option "FingerLow" "25" Option "MaxTapTime" "180" Option "MaxTapMove" "220" Option "FingerHigh" "30" Option "VertScrollDelta" "100" Option "TopEdge" "1700" Option "RightEdge" "5300" Option "AccelFactor" "0.0010" EndSection Section "Monitor" Identifier "monitor1" VendorName "Generic" ModelName "Flat Panel 1024x768" HorizSync 31.5-48.5 VertRefresh 40-70 # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 EndSection Section "Monitor" Identifier "monitor2" VendorName "Samsung" ModelName "710N Flat Panel 1280x1024" HorizSync 30-81 VertRefresh 56-75 Option "DPMS" #ModeLine "1280x1024" 75.00 1280 1328 1440 1688 EndSection Section "Device" Identifier "device1" VendorName "ATI" BoardName "ATI Radeon" Driver "radeon" Option "DPMS" Option "MonitorLayout" "LVDS,CRT" Option "CloneMode" "1280x1024@75Hz" EndSection Section "Device" Identifier "device2" VendorName "ATI" BoardName "ATI Radeon" Driver "radeon" Option "DPMS" #Option "MonitorLayout" "LVDS,CRT" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 16 Subsection "Display" Depth 8 Virtual 1024 768 EndSubsection Subsection "Display" Depth 15 Virtual 1024 768 EndSubsection Subsection "Display" Depth 16 Virtual 1024 768 EndSubsection Subsection "Display" Depth 24 Virtual 1024 768 EndSubsection EndSection Section "Screen" Identifier "screen2" Device "device2" Monitor "monitor2" DefaultColorDepth 24 Subsection "Display" Depth 24 Modes "1280x1024@75Hz" "1024x768@75Hz" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Option "Xinerama" "on" Option "Clone" "off" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Synaptics Mouse" "AlwaysCore" InputDevice "Mouse1" "CorePointer" Screen 0 "screen1" 0 0 Screen 1 "screen2" LeftOf "screen1" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" EndSection Any help is greatly appreciated. thanks Dave MC |
hope this helps
I got it working on an ATI radeon 9000 on RH 9. Theoritically it should be the same. Here you go:
# XFree86 4 configuration created by redhat-config-xfree86 Section "ServerLayout" Identifier "XFree86 Configured" Screen 0 "Screen0" RightOf "Screen1" Screen 1 "Screen1" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "on" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" ModulePath "/usr/X11R6/lib/modules" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "Module" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "record" Load "xtrap" Load "speedo" Load "type1" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" #DisplaySize 320 240 # mm Identifier "Monitor0" VendorName "SAM" ModelName "SyncMaster" HorizSync 30.0 - 71.0 VertRefresh 50.0 - 160.0 Option "DPMS" EndSection Section "Monitor" #DisplaySize 320 240 # mm Identifier "Monitor1" VendorName "SAM" ModelName "SyncMaster" HorizSync 30.0 - 71.0 VertRefresh 50.0 - 160.0 Option "DPMS" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "ForcePCIMode" "true" #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "PanelOff" # [<bool>] #Option "DDCMode" # [<bool>] #Option "CloneVRefresh" # [<str>] #Option "UseFBDev" # [<bool>] #Option "VideoKey" # <i> Identifier "Card0" Driver "ati" VendorName "ATI Technologies Inc" BoardName "Radeon R250 If [Radeon 9000]" Option "SWcursor" "true" Option "CloneDisplay" "2" Option "CloneMode" "Xinerama" Option "ForceLegacyCRT" "1" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Card1" Driver "ati" VendorName "ATI Technologies Inc" BoardName "Radeon R250 If [Radeon 9000]" Option "SWcursor" "true" Option "CloneDisplay" "2" Option "CloneMode" "Xinerama" Option "ForceLegacyCRT" "1" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 1 EndSubSection SubSection "Display" Depth 4 EndSubSection SubSection "Display" Depth 8 EndSubSection SubSection "Display" Depth 15 EndSubSection SubSection "Display" Depth 16 EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 1 EndSubSection SubSection "Display" Depth 4 EndSubSection SubSection "Display" Depth 8 EndSubSection SubSection "Display" Depth 15 EndSubSection SubSection "Display" Depth 16 EndSubSection SubSection "Display" Depth 24 # Modes "1024x768" "800x600" "640x480" Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection |
All times are GMT -5. The time now is 10:53 PM. |