[   33.955110] wlan: svn r3586
[   34.058950] ath_pci: svn r3586
[   34.059031] PCI: Enabling device 0000:00:06.0 (0000 -> 0002)
[   34.059040] PCI: No IRQ known for interrupt pin A of device 0000:00:06.0.
[   34.059086] wifi%d: request_irq failed

frederic@PC-portable-PB:~$ dmesg
[    0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003bfef000 (usable)
[    0.000000]  BIOS-e820: 000000003bff0000 - 000000003bffffc0 (ACPI data)
[    0.000000]  BIOS-e820: 000000003bffffc0 - 000000003c000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 63MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 245743) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   245743
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   245743
[    0.000000] On node 0 totalpages: 245743
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 127 pages used for memmap
[    0.000000]   HighMem zone: 16240 pages, LIFO batch:3
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00E6010 checksum 0
[    0.000000] ACPI: RSDP 000E6010, 0014 (r0 OID_00)
[    0.000000] ACPI: RSDT 3BFFC2D0, 002C (r1 INSYDE FACP_000      100 0000    10200)
[    0.000000] ACPI: FACP 3BFFFB00, 0074 (r1 INSYDE FACP_000      100 0000    10200)
[    0.000000] ACPI: DSDT 3BFFC310, 37E2 (r1 INSYDE    PN800     1000 INTL  2002036)
[    0.000000] ACPI: FACS 3BFFFFC0, 0040
[    0.000000] ACPI: APIC 3BFFFB90, 0068 (r1 INSYDE APIC_000 30303030 0000    10200)
[    0.000000] ACPI: BIOS age (400) fails cutoff (2000), acpi=force is required to enable ACPI
[    0.000000] ACPI: acpi=force override
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:13 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 3c000000:c3f80000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 243824
[    0.000000] Kernel command line: root=UUID=867d3dcb-4304-4f1c-96ee-96caa2245107 ro vga=791 pnpbios=off acpi=force pci=noacpi pci=biosirq locale=fr_FR elevator=cfq splash
[    0.000000] Found and enabled local APIC!
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1492.719 MHz processor.
[   10.206895] Console: colour dummy device 80x25
[   10.206901] console [tty0] enabled
[   10.207547] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   10.208154] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   10.242689] Memory: 961692k/982972k available (2157k kernel code, 20708k reserved, 998k data, 364k init, 65468k highmem)
[   10.242709] virtual kernel memory layout:
[   10.242711]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   10.242712]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   10.242714]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   10.242715]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   10.242717]       .init : 0xc041b000 - 0xc0476000   ( 364 kB)
[   10.242718]       .data : 0xc031b5a4 - 0xc0414dc4   ( 998 kB)
[   10.242719]       .text : 0xc0100000 - 0xc031b5a4   (2157 kB)
[   10.242746] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   10.242800] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[   10.322723] Calibrating delay using timer specific routine.. 2989.09 BogoMIPS (lpj=5978187)
[   10.322762] Security Framework initialized
[   10.322775] SELinux:  Disabled at boot.
[   10.322797] AppArmor: AppArmor initialized
[   10.322804] Failure registering capabilities with primary security module.
[   10.322818] Mount-cache hash table entries: 512
[   10.322988] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[   10.323005] CPU: L1 I cache: 32K, L1 D cache: 32K
[   10.323013] CPU: L2 cache: 1024K
[   10.323019] CPU: After all inits, caps: afe9fbff 00000000 00000000 00002040 00000000 00000000 00000000 00000000
[   10.323030] Compat vDSO mapped to ffffe000.
[   10.323048] Checking 'hlt' instruction... OK.
[   10.339201] SMP alternatives: switching to UP code
[   10.341533] Freeing SMP alternatives: 11k freed
[   10.341677] Early unpacking initramfs... done
[   10.793673] ACPI: Core revision 20070126
[   10.793752] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   10.795759] ACPI: setting ELCR to 0ea0 (from 0ca0)
[   10.805251] CPU0: Intel(R) Celeron(R) M processor         1.50GHz stepping 08
[   10.805285] Total of 1 processors activated (2989.09 BogoMIPS).
[   10.909955] Brought up 1 CPUs
[   10.909978] CPU0 attaching sched-domain:
[   10.909982]  domain 0: span 01
[   10.909984]   groups: 01
[   10.910213] net_namespace: 64 bytes
[   10.910233] Booting paravirtualized kernel on bare hardware
[   10.910811] Time: 12:58:37  Date: 05/01/08
[   10.910849] NET: Registered protocol family 16
[   10.911077] EISA bus registered
[   10.911121] ACPI: bus type pci registered
[   10.911292] PCI: PCI BIOS revision 2.10 entry at 0xe9b04, last bus=1
[   10.911298] PCI: Using configuration type 1
[   10.911303] Setting up standard PCI resources
[   10.913665] ACPI: EC: Look up EC in DSDT
[   10.916692] ACPI: Interpreter enabled
[   10.916701] ACPI: (supports S0 S1 S3 S4 S5)
[   10.916724] ACPI: Using PIC for interrupt routing
[   10.918689] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   10.926945] ACPI: EC: GPE = 0x1, I/O: command/status = 0x66, data = 0x62
[   10.926953] ACPI: EC: driver started in interrupt mode
[   10.927041] Linux Plug and Play Support v0.97 (c) Adam Belay
[   10.927080] pnp: PnP ACPI init
[   10.927101] ACPI: bus type pnp registered
[   10.931556] pnp: PnP ACPI: found 9 devices
[   10.931562] ACPI: ACPI bus type pnp unregistered
[   10.931567] PnPBIOS: Disabled
[   10.931822] PCI: Probing PCI hardware
[   10.931860] PCI: Probing PCI hardware (bus 00)
[   10.932628] PCI quirk: region 1000-107f claimed by vt8235 PM
[   10.932636] PCI quirk: region 1400-140f claimed by vt8235 SMB
[   10.933862] PCI: Using IRQ router VIA [1106/3177] at 0000:00:11.0
[   10.941925] NET: Registered protocol family 8
[   10.941931] NET: Registered protocol family 20
[   10.942012] AppArmor: AppArmor Filesystem Enabled
[   10.945852] Time: tsc clocksource has been installed.
[   10.953886] system 00:05: iomem range 0xe0000-0xfffff could not be reserved
[   10.953894] system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
[   10.953902] system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
[   10.953908] system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
[   10.953920] system 00:07: ioport range 0x330-0x331 has been reserved
[   10.953926] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[   10.953932] system 00:07: ioport range 0x1000-0x107f has been reserved
[   10.953939] system 00:07: ioport range 0x1400-0x140f has been reserved
[   10.984375] PCI: Bridge: 0000:00:01.0
[   10.984382]   IO window: c000-dfff
[   10.984390]   MEM window: c0000000-cfffffff
[   10.984397]   PREFETCH window: 90000000-9fffffff
[   10.984421] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   10.984436] NET: Registered protocol family 2
[   11.021828] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   11.022116] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   11.023680] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   11.024867] TCP: Hash tables configured (established 131072 bind 65536)
[   11.024882] TCP reno registered
[   11.033978] checking if image is initramfs... it is
[   11.485095] Switched to high resolution mode on CPU 0
[   11.919662] Freeing initrd memory: 8119k freed
[   11.920460] audit: initializing netlink socket (disabled)
[   11.920490] audit(1209646717.572:1): initialized
[   11.920715] highmem bounce pool size: 64 pages
[   11.922947] VFS: Disk quotas dquot_6.5.1
[   11.923054] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   11.923241] io scheduler noop registered
[   11.923249] io scheduler anticipatory registered
[   11.923253] io scheduler deadline registered
[   11.923270] io scheduler cfq registered (default)
[   11.923293] PCI: VIA PCI bridge detected. Disabling DAC.
[   11.923352] Boot video device is 0000:01:00.0
[   11.923646] isapnp: Scanning for PnP cards...
[   12.277560] isapnp: No Plug & Play device found
[   12.310712] Real Time Clock Driver v1.12ac
[   12.310857] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   12.312253] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   12.312351] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   12.312473] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   12.322566] i8042.c: Detected active multiplexing controller, rev 1.1.
[   12.327749] serio: i8042 KBD port at 0x60,0x64 irq 1
[   12.327769] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   12.327775] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   12.327780] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   12.327786] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   12.343809] mice: PS/2 mouse device common for all mice
[   12.343946] EISA: Probing bus 0 at eisa.0
[   12.343958] Cannot allocate resource for EISA slot 1
[   12.343992] EISA: Detected 0 cards.
[   12.343998] cpuidle: using governor ladder
[   12.344003] cpuidle: using governor menu
[   12.344125] NET: Registered protocol family 1
[   12.344163] Using IPI No-Shortcut mode
[   12.344209] registered taskstats version 1
[   12.344322]   Magic number: 8:780:985
[   12.344505] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   12.344511] EDD information not available.
[   12.344797] Freeing unused kernel memory: 364k freed
[   12.352204] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   12.460683] vesafb: framebuffer at 0x90000000, mapped to 0xf8880000, using 3072k, total 65536k
[   12.460703] vesafb: mode is 1024x768x16, linelength=2048, pages=41
[   12.460709] vesafb: protected mode interface info at c000:a81f
[   12.460714] vesafb: pmi: set display start = c00ca86d, set palette = c00ca8de
[   12.460720] vesafb: scrolling: redraw
[   12.460725] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[   12.460865] Console: switching to colour frame buffer device 128x48
[   12.470842] fb0: VESA VGA frame buffer device
[   13.672871] fuse init (API version 7.9)
[   13.699747] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   13.699757] ACPI: Processor [CPU0] (supports 16 throttling states)
[   13.707290] ACPI: Thermal Zone [TZ0] (0 C)
[   13.729360] device-mapper: uevent: version 1.0.3
[   13.729421] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[   13.753234] md: linear personality registered for level -1
[   13.759841] md: multipath personality registered for level -4
[   13.766028] md: raid0 personality registered for level 0
[   13.773156] md: raid1 personality registered for level 1
[   13.779722] xor: automatically using best checksumming function: pIII_sse
[   13.797535]    pIII_sse  :  3875.000 MB/sec
[   13.797538] xor: using function: pIII_sse (3875.000 MB/sec)
[   13.798435] async_tx: api initialized (async)
[   13.869532] raid6: int32x1    502 MB/s
[   13.937403] raid6: int32x2    580 MB/s
[   14.005329] raid6: int32x4    513 MB/s
[   14.073118] raid6: int32x8    409 MB/s
[   14.141035] raid6: mmxx1     1435 MB/s
[   14.208913] raid6: mmxx2     1751 MB/s
[   14.276833] raid6: sse1x1    1076 MB/s
[   14.344732] raid6: sse1x2    1806 MB/s
[   14.412635] raid6: sse2x1    1958 MB/s
[   14.480525] raid6: sse2x2    2185 MB/s
[   14.480528] raid6: using algorithm sse2x2 (2185 MB/s)
[   14.480531] md: raid6 personality registered for level 6
[   14.480534] md: raid5 personality registered for level 5
[   14.480536] md: raid4 personality registered for level 4
[   14.520043] md: raid10 personality registered for level 10
[   15.550982] usbcore: registered new interface driver usbfs
[   15.551019] usbcore: registered new interface driver hub
[   15.558963] usbcore: registered new device driver usb
[   15.574931] USB Universal Host Controller Interface driver v3.0
[   15.575050] PCI: setting IRQ 11 as level-triggered
[   15.575055] PCI: Found IRQ 11 for device 0000:00:10.0
[   15.575084] PCI: Sharing IRQ 11 with 0000:00:12.0
[   15.575088] PCI: Sharing IRQ 11 with 0000:01:00.0
[   15.575102] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   15.576241] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[   15.576278] uhci_hcd 0000:00:10.0: irq 11, io base 0x00001200
[   15.576465] usb usb1: configuration #1 chosen from 1 choice
[   15.576498] hub 1-0:1.0: USB hub found
[   15.576505] hub 1-0:1.0: 2 ports detected
[   15.651077] SCSI subsystem initialized
[   15.678894] PCI: setting IRQ 7 as level-triggered
[   15.678901] PCI: Found IRQ 7 for device 0000:00:10.1
[   15.678947] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   15.678976] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[   15.679008] uhci_hcd 0000:00:10.1: irq 7, io base 0x00001220
[   15.679145] usb usb2: configuration #1 chosen from 1 choice
[   15.679173] hub 2-0:1.0: USB hub found
[   15.679180] hub 2-0:1.0: 2 ports detected
[   15.740671] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[   15.742638] libata version 3.00 loaded.
[   15.782720] PCI: setting IRQ 5 as level-triggered
[   15.782728] PCI: Found IRQ 5 for device 0000:00:10.2
[   15.782759] PCI: Sharing IRQ 5 with 0000:00:11.5
[   15.782776] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   15.782805] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[   15.782837] uhci_hcd 0000:00:10.2: irq 5, io base 0x00001240
[   15.782969] usb usb3: configuration #1 chosen from 1 choice
[   15.782997] hub 3-0:1.0: USB hub found
[   15.783005] hub 3-0:1.0: 2 ports detected
[   15.886684] PCI: Enabling device 0000:00:10.3 (0000 -> 0002)
[   15.886700] PCI: setting IRQ 10 as level-triggered
[   15.886705] PCI: Found IRQ 10 for device 0000:00:10.3
[   15.886747] ehci_hcd 0000:00:10.3: EHCI Host Controller
[   15.886779] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[   15.886832] ehci_hcd 0000:00:10.3: irq 10, io mem 0x40010000
[   15.918388] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   15.930352] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   15.930529] usb usb4: configuration #1 chosen from 1 choice
[   15.930563] hub 4-0:1.0: USB hub found
[   15.930572] hub 4-0:1.0: 6 ports detected
[   16.034436] PCI: Found IRQ 11 for device 0000:00:12.0
[   16.034456] PCI: Sharing IRQ 11 with 0000:00:10.0
[   16.034470] PCI: Sharing IRQ 11 with 0000:01:00.0
[   16.038718] eth0: VIA Rhine II at 0xd0000000, 00:40:d0:94:c6:37, IRQ 11.
[   16.039432] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[   16.048926] pata_via 0000:00:11.1: version 0.3.3
[   16.049767] scsi0 : pata_via
[   16.050498] scsi1 : pata_via
[   16.050544] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
[   16.050548] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
[   16.214933] ata1.00: ATA-6: ST9808210A, 3.08, max UDMA/100
[   16.214941] ata1.00: 156301488 sectors, multi 16: LBA48 
[   16.230364] ata1.00: configured for UDMA/100
[   16.549900] ata2.00: ATAPI: MATSHITAUJ-850D, 1.00, max UDMA/33
[   16.721536] ata2.00: configured for UDMA/33
[   16.721717] scsi 0:0:0:0: Direct-Access     ATA      ST9808210A       3.08 PQ: 0 ANSI: 5
[   16.723811] scsi 1:0:0:0: CD-ROM            MATSHITA UJ-850D          1.00 PQ: 0 ANSI: 5
[   16.735388] Driver 'sd' needs updating - please use bus_type methods
[   16.735511] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   16.735527] sd 0:0:0:0: [sda] Write Protect is off
[   16.735530] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   16.735549] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   16.735609] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   16.735620] sd 0:0:0:0: [sda] Write Protect is off
[   16.735623] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   16.735640] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   16.735644]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   16.757737]  sda1 sda2 < sda5 >
[   16.786151] sd 0:0:0:0: [sda] Attached SCSI disk
[   16.793412] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   16.793438] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   16.798091] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[   16.798101] Uniform CD-ROM driver Revision: 3.20
[   16.798180] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   16.864936] usb 4-1: new high speed USB device using ehci_hcd and address 2
[   16.997545] usb 4-1: configuration #1 chosen from 1 choice
[   17.269612] EXT3-fs: INFO: recovery required on readonly filesystem.
[   17.269620] EXT3-fs: write access will be enabled during recovery.
[   17.428089] usb 1-2: new low speed USB device using uhci_hcd and address 3
[   17.602117] usb 1-2: configuration #1 chosen from 1 choice
[   17.624471] usbcore: registered new interface driver hiddev
[   17.641409] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/input/input2
[   17.651771] input,hidraw0: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-2
[   17.651791] usbcore: registered new interface driver usbhid
[   17.651795] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   18.432412] kjournald starting.  Commit interval 5 seconds
[   18.432437] EXT3-fs: sda1: orphan cleanup on readonly fs
[   18.432446] ext3_orphan_cleanup: deleting unreferenced inode 8847504
[   18.432480] EXT3-fs: sda1: 1 orphan inode deleted
[   18.432482] EXT3-fs: recovery complete.
[   18.484453] EXT3-fs: mounted filesystem with ordered data mode.
[   32.645249] input: PC Speaker as /devices/platform/pcspkr/input/input3
[   33.360938] ath_hal: module license 'Proprietary' taints kernel.
[   33.395957] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
[   33.547790] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   33.595743] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   33.707755] Linux agpgart interface v0.102
[   33.779451] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[   33.782256] agpgart: AGP aperture is 32M @ 0xa0000000
[   33.955110] wlan: svn r3586
[   34.058950] ath_pci: svn r3586
[   34.059031] PCI: Enabling device 0000:00:06.0 (0000 -> 0002)
[   34.059040] PCI: No IRQ known for interrupt pin A of device 0000:00:06.0.
[   34.059086] wifi%d: request_irq failed
[   34.147737] irda_init()
[   34.147772] NET: Registered protocol family 23
[   34.399818] ACPI: AC Adapter [AC] (on-line)
[   34.410548] input: Power Button (FF) as /devices/virtual/input/input4
[   34.434413] ACPI: Power Button (FF) [PWRF]
[   34.434494] input: Lid Switch as /devices/virtual/input/input5
[   34.449551] ACPI: Lid Switch [LID]
[   34.449665] input: Sleep Button (CM) as /devices/virtual/input/input6
[   34.474328] ACPI: Sleep Button (CM) [SBTN]
[   34.531217] ACPI: Battery Slot [BAT0] (battery present)
[   35.245448] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b3, caps: 0xa04713/0x200000
[   35.294475] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input7
[   36.375164] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input8
[   36.399454] ACPI: Video Device [VGA0] (multi-head: yes  rom: no  post: no)
[   36.571239] PCI: Found IRQ 5 for device 0000:00:11.5
[   36.571264] PCI: Sharing IRQ 5 with 0000:00:10.2
[   36.571410] PCI: Setting latency timer of device 0000:00:11.5 to 64
[   37.240453] ieee80211_crypt: registered algorithm 'NULL'
[   37.253057] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   37.253065] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   37.413925] usb 4-1: reset high speed USB device using ehci_hcd and address 2
[   37.549892] zd1211rw 4-1:1.0: eth1
[   37.549923] usbcore: registered new interface driver zd1211rw
[   39.980348] lp: driver loaded but no devices found
[   40.173752] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[   41.223521] EXT3 FS on sda1, internal journal
[   42.613781] ip_tables: (C) 2000-2006 Netfilter Core Team
[   43.808683] No dock devices found.
[   46.468411] eth0: link down
[   47.039598] zd1211rw 4-1:1.0: firmware version 4725
[   47.079542] zd1211rw 4-1:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72 AL2230_RF pa0 g--NS
[   47.436271] SoftMAC: Open Authentication completed with 00:17:33:49:06:d0
[   49.164089] ppdev: user-space parallel port driver
[   49.453500] audit(1209646755.712:2): type=1502 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5417 profile="/usr/sbin/cupsd" namespace="default"
[   49.583518] apm: BIOS not found.
[   50.223364] [drm] Initialized drm 1.1.0 20060810
[   50.286809] PCI: Found IRQ 11 for device 0000:01:00.0
[   50.287315] PCI: Sharing IRQ 11 with 0000:00:10.0
[   50.287641] PCI: Sharing IRQ 11 with 0000:00:12.0
[   50.288128] [drm] Initialized via 2.11.1 20070202 on minor 0