Unable to boot any 2.6.17 and up kernels

scm86 · 10-01-2006, 02:47 PM

Hi all, in an effort to get my ATI card working, I'm trying to update to one of the newer kernels. I am running FC5, 2.6.16-1.2133_FC5smp, and aside from the ATI module not working (thats a whole other story), it works great.

I have installed from RPM, through yum, each of the newest kernels as they came out, since my current kernel has been released. Any 2.6.17 or newer kernel will boot up to a certain point, and simply hang. It generally gets to Starting XFS, and dies there, but if it took longer than normal to boot, like having to get an IP address or taking the time to complain that its doenst like my wireless card, it will get to the process before XFS and stop there.

Any ideas?

It does the same thing with the testing 2.6.18 kernel RPM, from the fedora updates page...

Thanks,

Scott McNeely

manwichmakesameal · 10-02-2006, 12:18 PM

Do you have Xfs support enabled in the kernel? If not, its going to stop everytime it tries to access your drive because it doesnt know xfs. You may want to try building a custom kernel or using yum to get a kernel with xfs. Can you post an output of dmesg?

scm86 · 10-09-2006, 09:30 PM

Code:

[scott@188-69 ~]$ dmesg
Linux version 2.6.16-1.2133_FC5smp (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Tue Jun 6 01:52:09 EDT 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fdf0000 (usable)
 BIOS-e820: 000000003fdf0000 - 000000003fdfb000 (ACPI data)
 BIOS-e820: 000000003fdfb000 - 000000003fe00000 (ACPI NVS)
 BIOS-e820: 000000003fe00000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
125MB HIGHMEM available.
895MB LOWMEM available.
found SMP MP-table at 000f72a0
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 261616
  DMA zone: 4096 pages, LIFO batch:0
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 225279 pages, LIFO batch:31
  HighMem zone: 32241 pages, LIFO batch:7
DMI present.
Using APIC driver default
ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f7300
ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x3fdf6fca
ACPI: FADT (v001 SiS    648FX    0x06040000 PTL  0x00000001) @ 0x3fdfaf2e
ACPI: MADT (v001 PTLTD           APIC   0x06040000  LTP 0x00000000) @ 0x3fdfafa2
ACPI: DSDT (v001 Clevo     648FX 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:3 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:3 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Overriding APIC driver with bigsmp
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ11 used by override.
Enabling APIC mode:  Physflat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0428000 soft=c0408000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 3200.809 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1028948k/1046464k available (2027k kernel code, 16808k reserved, 837k data, 212k init, 128964k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6408.98 BogoMIPS (lpj=12817966)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000180 0000441d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
Leaving ESR disabled.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c0429000 soft=c0409000
Initializing CPU#1
Leaving ESR disabled.
Calibrating delay using timer specific routine.. 6400.65 BogoMIPS (lpj=12801315)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000180 0000441d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 04
Total of 2 processors activated (12809.64 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=4000
checking if image is initramfs... it is
Freeing initrd memory: 903k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9d8, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
ACPI: PCI Interrupt Link [LNKG] (IRQs *9)
ACPI: PCI Interrupt Link [LNKH] (IRQs 9) *0, disabled.
ACPI: Embedded Controller [EC] (gpe 23) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:04: ioport range 0x8000-0x808f could not be reserved
pnp: 00:04: ioport range 0x8090-0x80ff has been reserved
pnp: 00:04: ioport range 0x8100-0x811f has been reserved
pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:04: ioport range 0xfe00-0xfe00 has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: 9000-9fff
  MEM window: e8100000-e81fffff
  PREFETCH window: f0000000-f7ffffff
PCI: Bus 2, cardbus bridge: 0000:00:0c.0
  IO window: 00002400-000024ff
  IO window: 00002800-000028ff
  PREFETCH window: 50000000-51ffffff
  MEM window: 52000000-53ffffff
PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 18 (level, low) -> IRQ 16
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1160428669.096:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key B90BB6BF503FCE2A
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (47 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 648 chipset
agpgart: AGP aperture is 128M @ 0xe0000000
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 16
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 17
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: SAMSUNG MP0402H, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TSSTcorpCDW/DVD TS-L462A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 78242976 sectors (40060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 18 (level, low) -> IRQ 16
Yenta: CardBus bridge found at 0000:00:0c.0 [1558:0480]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0c.0, mfunc 0x01001002, devctl 0x44
Yenta: ISA IRQ mask 0x06e0, PCI irq 16
Socket status: 30000006
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI wakeup devices:
PCI0 MODM LANC PWRB SLPB  LID
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 212k freed
Write protecting the kernel read-only data: 365k
input: AT Translated Set 2 keyboard as /class/input/input0
input: PS/2 Mouse as /class/input/input1
input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security:  3 users, 6 roles, 1481 types, 152 bools, 1 sens, 256 cats
security:  58 classes, 43474 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev hda3, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
i2c-sis96x version 1.0.0
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
PCI: Enabling device 0000:00:0a.0 (0015 -> 0017)
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 19 (level, low) -> IRQ 18
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169 at 0xf8872000, 00:90:f5:3c:b9:87, IRQ 18
PCI: Enabling device 0000:00:03.3 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19
ehci_hcd 0000:00:03.3: EHCI Host Controller
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: irq 19, io mem 0xe8004000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xe8001000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xe8002000
ieee1394: Initialized config rom entry `ip1394'
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
usb 1-2: new high speed USB device using ehci_hcd and address 2
PCI: Enabling device 0000:00:03.2 (0010 -> 0012)
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xe8003000
usb 1-2: configuration #1 chosen from 1 choice
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 7 ports detected
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:02.3[B] -> GSI 17 (level, low) -> IRQ 23
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[23]  MMIO=[e8000000-e80007ff]  Max Packet=[2048]  IR/IT contexts=[4/6]
usb 1-3: new high speed USB device using ehci_hcd and address 3
PCI: Enabling device 0000:00:02.7 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 16
usb 1-3: configuration #1 chosen from 1 choice
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usb 2-2: new full speed USB device using ohci_hcd and address 2
intel8x0_measure_ac97_clock: measured 55459 usecs
intel8x0: clocking to 48000
usb 2-2: configuration #1 chosen from 1 choice
usb 1-2.4: new low speed USB device using ehci_hcd and address 5
usb 1-2.4: configuration #1 chosen from 1 choice
input: Microsoft Microsoft Wireless Optical Mouse 1.0A as /class/input/input3
input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse 1.0A] on usb-0000:00:03.3-2.4
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0090f5000087b93c]
usb 1-2.6: new high speed USB device using ehci_hcd and address 6
Non-volatile memory driver v1.2
usb 1-2.6: configuration #1 chosen from 1 choice
hiddev96: USB HID v1.10 Device [Western Digital External HDD] on usb-0000:00:03.3-2.6
usb 1-2.7: new high speed USB device using ehci_hcd and address 7
usb 1-2.7: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
floppy0: no floppy controllers found
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
lp0: console ready
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
  Vendor: LEXAR     Model: JUMPDRIVE         Rev: 1000
  Type:   Direct-Access                      ANSI SCSI revision: 00
usb-storage: device scan complete
  Vendor: GENERIC   Model: USB Storage-SMC   Rev: I16A
  Type:   Direct-Access                      ANSI SCSI revision: 00
  Vendor: WD        Model: 1600BB External   Rev: 0412
  Type:   Direct-Access                      ANSI SCSI revision: 00
  Vendor: GENERIC   Model: USB Storage-CFC   Rev: I16A
  Type:   Direct-Access                      ANSI SCSI revision: 00
usb-storage: device scan complete
  Vendor: GENERIC   Model: USB Storage-SDC   Rev: I16A
  Type:   Direct-Access                      ANSI SCSI revision: 00
  Vendor: GENERIC   Model: USB Storage-MSC   Rev: I16A
  Type:   Direct-Access                      ANSI SCSI revision: 00
usb-storage: device scan complete
 2:0:0:0: Attached scsi generic sg0 type 0
 0:0:0:0: Attached scsi generic sg1 type 0
 1:0:0:0: Attached scsi generic sg2 type 0
 0:0:0:1: Attached scsi generic sg3 type 0
 0:0:0:2: Attached scsi generic sg4 type 0
 0:0:0:3: Attached scsi generic sg5 type 0
SCSI device sda: 2030592 512-byte hdwr sectors (1040 MB)
sda: Write Protect is off
sda: Mode Sense: 43 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 2030592 512-byte hdwr sectors (1040 MB)
sda: Write Protect is off
sda: Mode Sense: 43 00 00 00
sda: assuming drive cache: write through
 sda: sda1
sd 2:0:0:0: Attached scsi removable disk sda
sd 0:0:0:0: Attached scsi removable disk sdb
SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB)
sdc: Write Protect is off
sdc: Mode Sense: 33 00 00 00
sdc: assuming drive cache: write through
SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB)
sdc: Write Protect is off
sdc: Mode Sense: 33 00 00 00
sdc: assuming drive cache: write through
 sdc: sdc1
sd 1:0:0:0: Attached scsi disk sdc
sd 0:0:0:1: Attached scsi removable disk sdd
sd 0:0:0:2: Attached scsi removable disk sde
sd 0:0:0:3: Attached scsi removable disk sdf
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
Avoiding DRI on Radeon R300+. Use 'allow_r300=1' module option to override
DRM: Fill_in_dev failed.
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ibm_acpi: IBM ThinkPad ACPI Extras v0.12a
ibm_acpi: http://ibm-acpi.sf.net/
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
program dmraid is using a deprecated SCSI ioctl, please convert it to SG_IO
EXT3 FS on hda3, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev hda5, type vfat), uses genfs_contexts
SELinux: initialized (dev hda1, type vfat), uses genfs_contexts
Adding 1574328k swap on /dev/hda6.  Priority:-1 extents:1 across:1574328k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8175 buckets, 65400 max) - 232 bytes per conntrack
r8169: eth0: link up
ndiswrapper version 1.17 loaded (preempt=no,smp=yes)
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
eth0: no IPv6 routers present
audit(1160443113.430:2): avc:  denied  { read } for  pid=2272 comm="gpm" name="localtime" dev=hda3 ino=1403563 scontext=system_u:system_r:gpm_t:s0 tcontext=user_u:object_                                   r:etc_t:s0 tclass=file
audit(1160443113.430:3): avc:  denied  { getattr } for  pid=2272 comm="gpm" name="localtime" dev=hda3 ino=1403563 scontext=system_u:system_r:gpm_t:s0 tcontext=user_u:obje                                   ct_r:etc_t:s0 tclass=file
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 16
audit(1160443182.446:4): avc:  denied  { execmod } for  pid=2839 comm="xscreensaver-gl" name="libGL.so.1.2" dev=hda3 ino=5124514 scontext=user_u:system_r:unconfined_t:s0                                    tcontext=user_u:object_r:lib_t:s0 tclass=file
application firefox-bin uses obsolete OSS audio interface

scm86 · 10-12-2006, 10:32 AM

The xfs it seems to hang on is the X font server, I only have EXT3 and Fat drives on the computer...

Is that needed, or is there a way to stop it from loading?

Scott McNeely

manwichmakesameal · 10-12-2006, 12:04 PM

If you dont have any xfs formatted drives, you dont need xfs. If you want to keep it from loading, and you feel like doing it, one surefire way is to recompile the kernel without xfs support. I'm sure there are other ways to keep that module from loading, but im not sure what it is, unless you put something like

Code:

modprobe -r xfs

in your rc.local file or whatever file you use for local system initialization. Reading your dmesg post again, have you tried to update your xserver? Or even try to use the fbdev driver for X? It looks to me(and i could be wrong) that your problems are coming from your ATI driver.

scm86 · 10-14-2006, 10:23 PM

Ok, well I've compiled the latest and greatest (2.6.18.1) from full source, no patches or anything. It hangs at starting automount. when it hangs, it just sits there, the only indication of hanging is that it stops doing stuff, no error messages or anything. If I move the mouse, the little graphic that shows that its doing something will move, but thats all that it will do, save from being able to switch rhgb between detail and non-detail view...

This is starting to get a little annoying, was there a hardware incompatibly added in the 2.6.17+ kernels?

Scott McNeely

scm86 · 10-18-2006, 10:30 PM

Fedora released the 2.6.18 rpms, the non SMP one works, but the SMP one does not. To have hyperthreading enabled, you need SMP to be on, right? The old SMP's worked, and showed me as having two 3.2GHZ P4's which is what it should see with HT enabled, why does the new one not work?

Scott McNeely