hallo, every body!!!
i´ve doawnload the last kernel, from our funy site...
heve him sucesfull unpacket and compiled
now i´ve boot probles whit this kernel...

[7.236000]VFS:Cnnot open root device "806" or unknow-block(8,6)
""""""""" Please append a correct "root"=boot option
""""""""" kernel panic-not syncing:VFS: unable to mount root fs on unknow block (8,6)

in my simples understanding, i reduce that it is a problem of the config ossf the boot loader...I think????

this is my lilo.conf...!!!

# Modified by YaST2. Last modification on lun mar 5 13:34:40 UTC 2007

menu-scheme = Wb:kw:Wb:Wb
timeout = 80
lba32
change-rules
reset
read-only
prompt
default = Linux
message = /boot/message
boot = /dev/sda

image=/boot/vmlinuz-2.6.19-test
label=habsuerte
image = /boot/vmlinuz
###Don't change this comment - YaST2 identifier: Original name: linux###
label = Linux

vga = 0x317
initrd = /boot/initrd
root = /dev/sda6


other = /dev/sda1
###Don't change this comment - YaST2 identifier: Original name: windows###
label = Windows


image = /boot/vmlinuz
###Don't change this comment - YaST2 identifier: Original name: failsafe###
label = Failsafe
append = "showopts ide=nodma apm=off acpi=off noresume selinux=0 nosmp noapic maxcpus=0 edd=off 3"
vga = normal
initrd = /boot/initrd
root = /dev/sda6

image=/boot/vmlinuz-2.6.19-final
label=my_Linux
#append ="root=/dev/sda6 selinux=0 resume=/dev/sda5 splash=silent showopts"
root=/dev/sda6

what can I do to make this kernel bootable???

Your kernel seems to boot properly. It is however not able to mount your root file system. Most likely, you compiled the hard disk driver or the file system driver as modules. Since the kernel cannot mount the root file system, it cannot load the modules. It however needs to load the modules to mount the root file system.

Please verfiy your kernel configuration ( make menuconfig) and make sure that your hard disk driver as well as the file system driver are compiled hard into the kernel (not as modules). Both of them need to be marked with an asterisk in the kernel configuration.

Hope this helps

Tilman

Just looking at your posting once more, I realized that your new kernel is probably the vmlinuz-2.6.19-test kernel.

I suggest to edit the lilo.conf:
label=habsuerte
image=/boot/vmlinuz-2.6.19-test
initrd = /boot/initrd
root = /dev/sda6

Cheers
Tilman

thanks for the fast reply!!!
i try the two options, hope that it work