yesterday had sound ,now don't!
Hello everyone there!
I use FC6 and i have Creative Labs SB Audigy LS When i had FC5 my sound didn't work at all.The configuration menu recognised my sound card but it just didn't work.I heared only noise. In FC6 i also din't hear any sound but suddenly (after i did update maybe?) my sound worked but it recognised only stereo 2.1 and not surround 5.1. Again suddenly,today i am at the beggining!I have no sound,i hear only the noise. I tried changing my /etc/modprobe.conf as alsa says but nothing. If anyone knows what to do.. Thanks! |
Sounds like the common issue. Run the command in a terminal. Run the command ' alsamixer '. Check the volumes for master and pcm. Use arrow keys to move across and raise if set at zero. Now check and see if a MM is at the top of those bars. If so arrow over to that channel and hit the M key to unmute the channel. Exit and test for sound. To save the settings after a reboot run this command as root ' alsactl store '.
Brian |
No,nothing happens
I had this problem with FC5 too I hear only noise |
Check in the HCL section here. It is a link at the top or to the right. See if others have the same issue. Most Audigy I thought used the module emu10k1. List your loaded modules with the command ' lsmod '. One last thought is make sure speakers is plugged in the correct port.
Brian |
I have done search and i figured that i must use ca0106
Also,i remind you that for some time suddenly i had music and suddenly gone away! My lsmod Module Size Used by autofs4 25413 2 hidp 24129 2 rfcomm 46041 0 l2cap 31681 10 hidp,rfcomm bluetooth 58917 5 hidp,rfcomm,l2cap sunrpc 158333 1 ndiswrapper 187028 0 ip_conntrack_ftp 12081 0 ip_conntrack_netbios_ns 7105 0 ipt_REJECT 9665 1 xt_state 6337 11 ip_conntrack 56993 3 ip_conntrack_ftp,ip_conntrack_netbios_ns,xt_state nfnetlink 11353 1 ip_conntrack iptable_filter 7233 1 ip_tables 17669 1 iptable_filter ip6t_REJECT 9537 1 xt_tcpudp 7361 36 ip6table_filter 7105 1 ip6_tables 18821 1 ip6table_filter x_tables 18501 6 ipt_REJECT,xt_state,ip_tables,ip6t_REJECT,xt_tcpudp,ip6_tables dm_mirror 33041 0 dm_multipath 22601 0 dm_mod 61529 2 dm_mirror,dm_multipath video 21061 0 sbs 20225 0 i2c_ec 9281 1 sbs button 10961 0 battery 14405 0 asus_acpi 20697 0 ac 9541 0 ipv6 267489 69 ip6t_REJECT parport_pc 31205 1 lp 17033 0 parport 40841 2 parport_pc,lp snd_ca0106 37573 1 snd_rawmidi 28737 1 snd_ca0106 snd_ac97_codec 95073 1 snd_ca0106 snd_seq_dummy 8133 0 snd_seq_oss 37185 0 snd_seq_midi_event 11841 1 snd_seq_oss snd_seq 57137 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event snd_seq_device 12621 4 snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 46561 0 snd_mixer_oss 20545 1 snd_pcm_oss snd_pcm 80325 3 snd_ca0106,snd_ac97_codec,snd_pcm_oss floppy 61284 1 snd_timer 27077 2 snd_seq,snd_pcm snd 57029 12 snd_ca0106,snd_rawmidi,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,s nd_pcm,snd_timer soundcore 14113 1 snd snd_ac97_bus 6593 1 snd_ac97_codec snd_page_alloc 14281 2 snd_ca0106,snd_pcm 8139cp 28609 0 nvidia 4723188 22 8139too 31169 0 i2c_nforce2 11457 0 mii 9665 2 8139cp,8139too pcspkr 7361 0 i2c_core 25537 3 i2c_ec,nvidia,i2c_nforce2 serio_raw 11205 0 usblp 18369 0 ide_cd 42337 7 cdrom 38625 1 ide_cd sata_nv 15685 0 libata 102745 1 sata_nv sd_mod 24897 0 scsi_mod 138601 2 libata,sd_mod ext3 135369 2 jbd 63209 1 ext3 ehci_hcd 35533 0 ohci_hcd 25181 0 uhci_hcd 27725 0 I didn't find anything at the link |
Looks like it is seeing two sound cards. Is there onboard audio card?
If so post contents of /etc/modprobe.conf If bios can disable the onboard sound card try that. On reboot then the kudzu tool should correct hardware devices. Try sound. If no sound try the alsamixer routine in above post. Brian |
I have disabled the on board card.
My /etc/modprobe.conf is alias eth0 8139too alias scsi_hostadapter sata_nv alias wlan0 ndiswrapper alias snd-card-0 snd-ca0106 options snd-card-0 index=0 options snd-ca0106 index=0 remove snd-ca0106 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-ca0106 alias snd-card-1 snd-mpu401 options snd-card-1 index=1 options snd-mpu401 index=1 remove snd-mpu401 { /usr/sbin/alsactl store 1 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-mpu401 # ALSA portion alias char-major-116 snd alias snd-slot-0 snd-card-0 alias snd-slot-1 snd-card-1 alias snd-card-0 snd-ca0106 alias snd-card-1 snd-via82xx # Module options should go here options snd-card-0 index=0 options snd-emu10k1 index=0 options snd-card-1 index=1 options snd-via82xx index=1 # OSS/Free portion alias char-major-14 soundcore # card #0 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss # card #1 alias sound-service-1-0 snd-mixer-oss alias sound-service-1-3 snd-pcm-oss alias sound-service-1-12 snd-pcm-oss I added the lines below #ALSA portion as i saw at the alsa project site But before that (adding the lines) again i hadn't sound Thanks ! |
Know nothing about the #Alsa section you have added. Other than that it looks good on the modprobe.conf file. That is the correct module for the sound card you have as far as what I can find here and on the net. I am at a lost now as to why it does not work.
What is the permission of /dev/dsp Brian |
The permission is read and write
When i do /dev/dsp at console as root it says access denied |
Does seem odd. Doing a ls -l /dev/dsp shows crw****** for me. Is this yours?
Brian |
Play with the settings system-config-soundcard until you hear pleasant sounds.
Hit apply and reboot. Play an audio loop with xmms or other sound program and mess around with the sliders in kmix until you hear sound again. Log out of KDE. This will save your session and settings. Or go into session editor and enable restart to manually-saved sessions and save your session. Now KDE will remember these settings every time it boots up, even if you mess with them later. |
Yes , my /dev/dsp is crw*****
I play with kmix settings but nothing.I can hear a little bit sound .Noise is everywhere |
I did mention it earlier but does the card have 2 jacks for speakers? If so try the other. Other than that I am at a lost to the issue. Maybe the card you have is not the same as previous Audigy ones and the module does not work with that card.
Brian |
You have enabled digital sound, which sounds like noise on normal speakers. Maybe right-click kmix and enable IEC958 playback and then disable it. Try clicking and un-clicking the other IEC958 switches too, especially IEC958 output.
Or get digital speakers. |
I disabled IEC958 ,played with kmix but still the same noise!
I don't know what to do!!! Thanks anyway! |
All times are GMT -5. The time now is 02:15 PM. |