LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 02-18-2005, 10:15 AM   #1
BenRichards
LQ Newbie
 
Registered: May 2004
Posts: 17

Rep: Reputation: 0
X crashes on logout - TV-Out Newbie needs Help


Hello All,

I have 4 pci GetForce4 4000 each with a tv out, though I only want to use the tv out on 1 of them. Everything works perfectly when I only use VGA outputs. When I use 1 of the SVideo out and the rest VGA's everything comes up fine but locks when I try and logout. I'm pretty sure I followed all the directions in nvidia's documentation on configuing the tv out, I even upgraded to XFree86 4.4 even though I already had 4.3 becuase nvidia said there may be issues getting back to the console with something lower than 4.3. I'm kind of just looking for some direction so if you could spare some help I would greatly appreciate it. I'm using the nvidia driver versions 6111 because 6629 seems to crash my system or doesn't seem to refresh the stream when X does load.

Here is my XFree86 log file when I have the tv out on the 4th video card connected. My XF86config file is below it. Sorry for the length.

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/cobras:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

XFree86 Version 4.4.0
Release Date: 29 February 2004
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.18-14 i686 [ELF]
Current Operating System: Linux cobras 2.4.20-31.9.SNARE096 #1 Tue Jun 1 15:47:10 CDT 2004 i686
Build Date: 27 February 2004
Changelog Date: 29 February 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Feb 17 16:18:35 2005
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen1" (0)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "VideoCard1"
(**) |-->Screen "Screen2" (1)
(**) | |-->Monitor "Monitor2"
(**) | |-->Device "VideoCard2"
(**) |-->Screen "Screen3" (2)
(**) | |-->Monitor "Monitor3"
(**) | |-->Device "VideoCard3"
(**) |-->Screen "Screen4" (3)
(**) | |-->Monitor "Monitor4"
(**) | |-->Device "VideoCard4"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "Xinerama" "off"
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.7
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(--) using VT number 7
//Removed PCI scan data

(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.6111
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project & the After X-TT Project"
compiled for 4.4.0, module version = 2.1.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) LoadModule: "nvidia"
(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.6111
Module class: XFree86 Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) NVIDIA X Driver 1.0-6111 Tue Jul 27 07:56:22 PDT 2004
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 02:05:0
(--) Chipset NVIDIA GPU found
(--) Chipset NVIDIA GPU found
(--) Chipset NVIDIA GPU found
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
//Removed
(II) Setting vga for screen 0.
(II) Setting vga for screen 1.
(II) Setting vga for screen 2.
(II) Setting vga for screen 3.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.7
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(0): Linear framebuffer at 0xC8000000
(--) NVIDIA(0): MMIO registers at 0xF4000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce4 MX 4000
(--) NVIDIA(0): VideoBIOS: 04.18.20.39.13
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): VideoRAM: 131072 kBytes
(II) NVIDIA(0): Connected display device(s): CRT-0
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(WW) NVIDIA(0): Failure reading EDID parameters for display device CRT-0
(II) NVIDIA(0): Monitor1: Using hsync range of 31.50-96.00 kHz
(II) NVIDIA(0): Monitor1: Using vrefresh range of 50.00-150.00 Hz
(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz

(WW) NVIDIA(0): Not using mode "1152x768":
(WW) NVIDIA(0): horizontal sync start (1178) not a multiple of 8
(WW) NVIDIA(0): Not using mode "576x384":
(WW) NVIDIA(0): horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(0): Not using mode "360x200":
(WW) NVIDIA(0): horizontal sync start (378) not a multiple of 8
(**) NVIDIA(0): Validated modes for display device CRT-0:

(II) NVIDIA(0): Virtual screen size determined to be 1280 x 960
(==) NVIDIA(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.7
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Reloading /usr/X11R6/lib/modules/libvgahw.a
(**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(1): RGB weight 888
(==) NVIDIA(1): Default visual is TrueColor
(==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(1): Linear framebuffer at 0xD0000000
(--) NVIDIA(1): MMIO registers at 0xF6000000
(II) NVIDIA(1): NVIDIA GPU detected as: GeForce4 MX 4000
(--) NVIDIA(1): VideoBIOS: 04.18.20.39.13
(--) NVIDIA(1): Interlaced video modes are supported on this GPU
(--) NVIDIA(1): VideoRAM: 131072 kBytes
(II) NVIDIA(1): Connected display device(s): CRT-0
(--) NVIDIA(1): Display device CRT-0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(1): Display device CRT-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(1): Display device CRT-0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(WW) NVIDIA(1): Failure reading EDID parameters for display device CRT-0
(II) NVIDIA(1): Monitor2: Using hsync range of 31.50-96.00 kHz
(II) NVIDIA(1): Monitor2: Using vrefresh range of 50.00-150.00 Hz
(II) NVIDIA(1): Clock range: 12.00 to 350.00 MHz

(WW) NVIDIA(1): Not using mode "1152x768":
(WW) NVIDIA(1): horizontal sync start (1178) not a multiple of 8
(WW) NVIDIA(1): Not using mode "576x384":
(WW) NVIDIA(1): horizontal sync start (589) not a multiple of 8
(WW) NVIDIA(1): Not using mode "360x200":
(WW) NVIDIA(1): horizontal sync start (378) not a multiple of 8
(**) NVIDIA(1): Validated modes for display device CRT-0:

(II) NVIDIA(1): Virtual screen size determined to be 1280 x 960
(==) NVIDIA(1): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/X11R6/lib/modules/libfb.a
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Reloading /usr/X11R6/lib/modules/libramdac.a
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Reloading /usr/X11R6/lib/modules/libvgahw.a
(**) NVIDIA(2): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(2): RGB weight 888
(==) NVIDIA(2): Default visual is TrueColor
(==) NVIDIA(2): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(2): Linear framebuffer at 0xD8000000
(--) NVIDIA(2): MMIO registers at 0xF7000000
(II) NVIDIA(2): NVIDIA GPU detected as: GeForce4 MX 4000
(--) NVIDIA(2): VideoBIOS: 04.18.20.39.13
(--) NVIDIA(2): Interlaced video modes are supported on this GPU
(--) NVIDIA(2): VideoRAM: 131072 kBytes
(II) NVIDIA(2): Connected display device(s): CRT-0
(--) NVIDIA(2): Display device CRT-0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(2): Display device CRT-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(2): Display device CRT-0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(WW) NVIDIA(2): Failure reading EDID parameters for display device CRT-0
(II) NVIDIA(2): Monitor3: Using hsync range of 31.50-96.00 kHz
(II) NVIDIA(2): Monitor3: Using vrefresh range of 50.00-150.00 Hz
(II) NVIDIA(2): Clock range: 12.00 to 350.00 MHz

(**) NVIDIA(2): Validated modes for display device CRT-0:

(II) NVIDIA(2): Virtual screen size determined to be 1280 x 960
(==) NVIDIA(2): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/X11R6/lib/modules/libfb.a
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Reloading /usr/X11R6/lib/modules/libramdac.a
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Reloading /usr/X11R6/lib/modules/libvgahw.a
(**) NVIDIA(3): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(3): RGB weight 888
(==) NVIDIA(3): Default visual is TrueColor
(==) NVIDIA(3): Using gamma correction (1.0, 1.0, 1.0)
(--) NVIDIA(3): Linear framebuffer at 0xE0000000
(--) NVIDIA(3): MMIO registers at 0xF8000000
(II) NVIDIA(3): NVIDIA GPU detected as: GeForce4 MX 4000
(--) NVIDIA(3): VideoBIOS: 04.18.20.39.13
(--) NVIDIA(3): Interlaced video modes are supported on this GPU
(--) NVIDIA(3): VideoRAM: 131072 kBytes
(II) NVIDIA(3): Connected display device(s): TV-0
(--) NVIDIA(3): Detected TV Encoder: NVIDIA
(--) NVIDIA(3): Display device TV-0: maximum pixel clock at 8 bpp: 350 MHz
(--) NVIDIA(3): Display device TV-0: maximum pixel clock at 16 bpp: 350 MHz
(--) NVIDIA(3): Display device TV-0: maximum pixel clock at 32 bpp: 350 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) Multi Device Card detected: [2:5:0][2:6:0][2:7:0][2:8:0]
(II) Truncating PCI BIOS Length to 63488
(II) NVIDIA(3): Monitor4: Using hsync range of 31.50-96.00 kHz
(II) NVIDIA(3): Monitor4: Using vrefresh range of 50.00-150.00 Hz
(II) NVIDIA(3): Clock range: 12.00 to 350.00 MHz
(
(II) NVIDIA(3): Virtual screen size determined to be 640 x 480
(==) NVIDIA(3): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Reloading /usr/X11R6/lib/modules/libfb.a
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Reloading /usr/X11R6/lib/modules/libramdac.a
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? Yes, I do.
(II) LoadModule: "rac"
(II) Loading /usr/X11R6/lib/modules/librac.a
(II) Module rac: vendor="The XFree86 Project"
compiled for 4.4.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) resource ranges after preInit:
/Removved
(II) NVIDIA(0): Setting mode "1280x960"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) NVIDIA(1): Setting mode "1280x960"
(II) NVIDIA(1): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(1): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(1): Backing store disabled
(==) NVIDIA(1): Silken mouse enabled
(==) RandR enabled
(II) NVIDIA(2): Setting mode "1280x960"
(II) NVIDIA(2): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(2): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(2): Backing store disabled
(==) NVIDIA(2): Silken mouse enabled
(==) RandR enabled
(II) NVIDIA(3): Setting mode "640x480"
(II) NVIDIA(3): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(3): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(3): Backing store disabled
(==) NVIDIA(3): Silken mouse enabled
(==) RandR enabled
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Entity 2 shares no resources
(II) Entity 3 shares no resources
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing extension GLX
(**) Option "Protocol" "PS/2"
(**) Mouse0: Device: "/dev/psaux"
(**) Mouse0: Protocol: "PS/2"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "yes"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) Mouse0: ps2EnableDataReporting: succeeded




Here's my XF86config file. Can anyone tell me what I'm doing wrong or what options I'm missing?



#*********************************************
# SERVER SETUP
#*********************************************
Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen1"
Screen "Screen2"
Screen "Screen3"
Screen "Screen4"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "off"
EndSection

Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
# Load "fbdevhw"
Load "glx"
# Load "record"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

#*********************************************
# MONITOR SETUP
#*********************************************

Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Unknown monitor"
HorizSync 31.5 - 96
VertRefresh 50.0 - 150.0
EndSection

Section "Monitor"
Identifier "Monitor2"
VendorName "Monitor Vendor"
ModelName "Unknown monitor"
HorizSync 31.5 - 96.0
VertRefresh 50.0- 150.0
EndSection

Section "Monitor"
Identifier "Monitor3"
VendorName "Monitor Vendor"
ModelName "Unknown monitor"
HorizSync 31.5 - 96.0
VertRefresh 50.0 - 150.0
EndSection

Section "Monitor"
Identifier "Monitor4"
VendorName "Monitor Vendor"
ModelName "Unknown monitor"
HorizSync 31.5 - 96.0
VertRefresh 50.0 - 150.0
EndSection

#*********************************************
# VIDEO CARD SETUP
#*********************************************
Section "Device"
Identifier "VideoCard1"
Driver "nvidia"
VendorName "Videocard vendor"
# BoardName "NVIDIA GeForce 2 MX (generic)"
BusID "PCI:2:5:0"
EndSection
Section "Device"
Identifier "VideoCard2"
Driver "nvidia"
VendorName "Videocard vendor"
# BoardName "NVIDIA GeForce 2 MX (generic)"
BusID "PCI:2:6:0"
EndSection
Section "Device"
Identifier "VideoCard3"
Driver "nvidia"
VendorName "Videocard vendor"
# BoardName "NVIDIA GeForce 2 MX (generic)"
BusID "PCI:2:7:0"
EndSection
Section "Device"
Identifier "VideoCard4"
Driver "nvidia"
VendorName "Videocard vendor"
# BoardName "NVIDIA GeForce 2 MX (generic)"
BusID "PCI:2:8:0"
EndSection
#*********************************************
# X-SCREEN SETUP
#*********************************************
Section "Screen"
Identifier "Screen1"
Device "VideoCard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x960"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "VideoCard2"
Monitor "Monitor2"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x960"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "VideoCard3"
Monitor "Monitor3"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x960"
EndSubSection
EndSection
#SVideo
Section "Screen"
Identifier "Screen4"
Device "VideoCard4"
Monitor "Monitor4"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
KDE 3.3.0 crashes when I logout hubabuba Linux - Software 0 09-23-2004 04:39 PM
System crashes at logout Eric_The_Froggy Mandriva 7 06-15-2004 09:31 AM
kde 3.2 crashes on logout fuzzyworm Linux - Software 0 04-27-2004 09:05 PM
KDM crashes when trying to logout Oxyd Linux - Software 0 10-30-2003 03:20 PM
Tapedrive to logout crashes captgoodnight Linux - General 0 03-30-2002 11:58 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 08:07 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration