wlan problems
I have a Linksys WUSB11 v2.5 and have been trying to install the thing like mad lately....
first, i tried modprobeing orinoco_usb, but apparently i dont have that module!! (how can I get that ?)
So, i turned to wlan..... i installed the correct rpms and edited the wlan conf files.... here is the error message i keep getting.
####################################
Bringing up interface wlan0: Error for wireless request "Set Encode" (8B2A) :
SET failed on device wlan0 ; Function not implemented.
Error for wireless request "Set ESSID" (8B1A) :
SET failed on device wlan0 ; Function not implemented.
Determining IP information for wlan0...SIOCSIFFLAGS: No such device
SIOCSIFFLAGS: No such device
failed.
####################################
Here are my conf files~~~~~~~
~~~~~~~~modules.conf
options prism2_usb prism2_doreset=1
alias wlan0 prism2_usb
~~~~~~~~~wlan.conf
WLAN_DEVICES="wlan0"
# Below is the list of channels to scan, when we scan.
ChannelList="01:02:03:04:05:06:07:08:09:0a:0b:00:00:00"
# Below is the min and max time we linger on a channel during a scan.
ChannelMinTime=200
ChannelMaxTime=250
# And here we have the master scan toggle.
WLAN_SCAN=n
##########
SSID_wlan0="batcave"
ENABLE_wlan0=y
#SSID_wlan1=""
#ENABLE_wlan1=n
#SSID_wlan2=""
#ENABLE_wlan2=n
~~~~~~~~~~wlancfg-batcave
#=======WEP===========================================
# [Dis/En]able WEP. Settings only matter if PrivacyInvoked is true
lnxreq_hostWEPEncrypt=true # true|false
lnxreq_hostWEPDecrypt=true # true|false
dot11PrivacyInvoked=true # true|false ##false
dot11WEPDefaultKeyID=0 # 0|1|2|3
dot11ExcludeUnencrypted=true # true|false, in AP this means WEP is required.
# If PRIV_GENSTR is not empty, use PRIV_GENTSTR to generate
# keys (just a convenience)
PRIV_GENERATOR=/sbin/nwepgen # nwepgen, Neesus compatible
PRIV_KEY128=false # keylength to generate
PRIV_GENSTR=""
# or set them explicitly. Set genstr or keys, not both.
dot11WEPDefaultKey0= # format: xx:xx:xx:xx:xx or
dot11WEPDefaultKey1= # xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx:xx
dot11WEPDefaultKey2= # e.g. 01:20:03:40:05 or
dot11WEPDefaultKey3= # 01:02:03:04:05:06:07:08:09:0a:0b:0c:0d
#=======SELECT STATION MODE===================
IS_ADHOC=n # y|n, y - adhoc, n - infrastructure
#======= INFRASTRUCTURE STATION ===================
# What kind of authentication?
AuthType="sharedkey" # opensystem | sharedkey (requires WEP)
#======= ADHOC STATION ============================
BCNINT=100 # Beacon interval (in Kus)
CHANNEL=9 # DS channel for BSS (1-14, depends
# on regulatory domain)
BASICRATES="2 4" # Rates for mgmt&ctl frames (in 500Kb/s)
OPRATES="2 4 11" # Supported rates in BSS (in 500Kb/s)
** i have WEP keys, but im not going to show you those!
|