LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
Reload this Page WinFast TV2000XP Expert tv tuner
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 09-17-2005, 03:09 PM   #1
zerooo
LQ Newbie
 
Registered: Mar 2005
Posts: 5

Rep: Reputation: 0
[Solved] WinFast TV2000XP Expert tv tuner

Hello, i have a WinFast TV2000XP Expert TV tuner from Leadtek and want to make it work on ubuntu 5.04. I tried to set it up earlier on linux, but failed (black&white and no sound) So i want ask you how to set up it correctly. Here is my lspsci, lsmod and dmesg outputs:
lspci:
Code:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 A GP]
0000:00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C /8139C+ (rev 10)
0000:00:0b.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT82 3x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Contr oller (rev 23)
0000:00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Contr oller (rev 23)
0000:00:14.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a )
0000:00:14.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev  0a)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3 Ti 200 ] (rev a3)
lsmod:
Code:
rfcomm                 34972  0
l2cap                  22404  5 rfcomm
bluetooth              43012  4 rfcomm,l2cap
cpufreq_userspace       4444  0
cpufreq_stats           5124  0
freq_table              4484  1 cpufreq_stats
cpufreq_powersave       1920  0
cpufreq_ondemand        5916  0
cpufreq_conservative     6820  0
ipt_TCPMSS              4096  1
ipt_tcpmss              2304  1
iptable_filter          2944  1
ip_tables              18176  3 ipt_TCPMSS,ipt_tcpmss,iptable_filter
video                  16004  0
sony_acpi               5516  0
pcc_acpi               11392  0
dev_acpi               11396  0
i2c_acpi_ec             5760  0
button                  6672  0
battery                 9604  0
container               4608  0
ac                      4996  0
pppoe                  13120  2
pppox                   3464  1 pppoe
ipv6                  217408  8
af_packet              20232  2
ppp_generic            25748  6 pppoe,pppox
slhc                    6656  1 ppp_generic
tsdev                   7616  0
snd_mpu401              6344  0
snd_mpu401_uart         6784  1 snd_mpu401
analog                 10528  0
floppy                 52692  0
pcspkr                  3652  0
rtc                    11832  0
emu10k1_gp              3712  0
gameport               14472  3 analog,emu10k1_gp
snd_emu10k1_synth       6528  0
snd_emux_synth         31744  1 snd_emu10k1_synth
snd_seq_virmidi         6912  1 snd_emux_synth
snd_seq_midi_emul       6528  1 snd_emux_synth
snd_seq_dummy           3844  0
snd_seq_oss            29440  0
snd_seq_midi            8608  0
snd_seq_midi_event      6656  3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_seq                44688  9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_emu10k1            96772  2 snd_emu10k1_synth
snd_rawmidi            22816  4 snd_mpu401_uart,snd_seq_virmidi,snd_seq_midi,snd_emu10k1
snd_seq_device          8204  8 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_emu10k1,snd_rawmidi
snd_ac97_codec         71804  1 snd_emu10k1
snd_pcm_oss            46368  0
snd_mixer_oss          16128  1 snd_pcm_oss
snd_pcm                78344  3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_timer              21764  3 snd_seq,snd_emu10k1,snd_pcm
snd_page_alloc         10120  2 snd_emu10k1,snd_pcm
snd_util_mem            4480  2 snd_emux_synth,snd_emu10k1
snd_hwdep               8608  2 snd_emux_synth,snd_emu10k1
snd                    48644  17 snd_mpu401,snd_mpu401_uart,snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep
soundcore               9184  1 snd
i2c_viapro              7696  0
via_ircc               23700  0
irda                  159804  1 via_ircc
crc_ccitt               2176  1 irda
tda9887                13208  0
tuner                  24488  0
cx8800                 28812  0
cx88xx                 50976  1 cx8800
i2c_algo_bit            8584  1 cx88xx
video_buf              19844  2 cx8800,cx88xx
ir_common               7428  1 cx88xx
tveeprom               12568  1 cx88xx
i2c_core               19728  7 i2c_acpi_ec,i2c_viapro,tda9887,tuner,cx88xx,i2c_algo_bit,tveeprom
v4l1_compat            12420  1 cx8800
v4l2_common             5888  1 cx8800
btcx_risc               4872  2 cx8800,cx88xx
videodev                9344  2 cx8800,cx88xx
pci_hotplug            24628  0
via_agp                 9472  1
dm_mod                 50364  1
evdev                   9088  0
nvidia               3711364  12
agpgart                32328  2 via_agp,nvidia
psmouse                25988  0
mousedev               10912  1
parport_pc             31812  1
lp                     11460  0
parport                32072  2 parport_pc,lp
md                     40656  0
ext3                  115976  1
jbd                    48536  1 ext3
vga16fb                12232  1
vgastate                8320  1 vga16fb
thermal                13192  0
processor              23100  1 thermal
fan                     4740  0
ide_cd                 36996  0
cdrom                  33952  1 ide_cd
ide_disk               16128  4
ide_generic             1664  0
usbhid                 30688  0
uhci_hcd               28048  0
usbcore               104188  3 usbhid,uhci_hcd
via82cxxx              12188  1
ide_core              125268  4 ide_cd,ide_disk,ide_generic,via82cxxx
8139too                23552  0
8139cp                 18432  0
mii                     5248  2 8139too,8139cp
unix                   24624  688
fbcon                  34176  72
tileblit                2560  1 fbcon
font                    8448  1 fbcon
bitblit                 5248  1 fbcon
vesafb                  8088  0
cfbcopyarea             4480  2 vga16fb,vesafb
cfbimgblt               2944  2 vga16fb,vesafb
cfbfillrect             3840  2 vga16fb,vesafb
softcursor              2432  2 vga16fb,vesafb
capability              5000  0
commoncap               6784  1 capability
dmesg:
Code:
[4294667.687000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294667.689000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.706000] Memory: 511364k/524224k available (1415k kernel code, 12252k reserved, 763k data, 224k init, 0k highmem)[4294667.706000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.706000] Calibrating delay loop... 3039.23 BogoMIPS (lpj=1519616)
[4294667.728000] Security Framework v1.0.0 initialized
[4294667.728000] SELinux:  Disabled at boot.
[4294667.728000] Mount-cache hash table entries: 512
[4294667.728000] CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
[4294667.728000] CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
[4294667.728000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294667.728000] CPU: L2 Cache: 256K (64 bytes/line)
[4294667.728000] CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000 00000000 00000000
[4294667.728000] CPU: AMD Athlon(tm) XP 1800+ stepping 02
[4294667.728000] Enabling fast FPU save and restore... done.
[4294667.728000] Enabling unmasked SIMD FPU exception support... done.
[4294667.728000] Checking 'hlt' instruction... OK.
[4294667.732000] Checking for popad bug... OK.
[4294667.732000] checking if image is initramfs... it is
[4294668.192000] Freeing initrd memory: 4672k freed
[4294668.193000] ACPI: Looking for DSDT in initrd... not found!
[4294668.253000]  not found!
[4294668.260000] ACPI: setting ELCR to 0200 (from 1a20)
[4294668.478000] NET: Registered protocol family 16
[4294668.478000] EISA bus registered
[4294668.478000] ACPI: bus type pci registered
[4294668.478000] PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=1
[4294668.478000] PCI: Using configuration type 1
[4294668.478000] mtrr: v2.0 (20020519)
[4294668.479000] ACPI: Subsystem revision 20050729
[4294668.484000] ACPI: Interpreter enabled
[4294668.484000] ACPI: Using PIC for interrupt routing
[4294668.485000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.485000] PCI: Probing PCI hardware (bus 00)
[4294668.485000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294668.485000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294668.487000] Boot video device is 0000:01:00.0
[4294668.507000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.508000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[4294668.509000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
[4294668.509000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[4294668.509000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
[4294668.513000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.513000] pnp: PnP ACPI init
[4294668.518000] pnp: PnP ACPI: found 13 devices
[4294668.518000] PnPBIOS: Disabled by ACPI PNP
[4294668.518000] PCI: Using ACPI for IRQ routing
[4294668.518000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294668.539000] audit: initializing netlink socket (disabled)
[4294668.539000] audit: initialized
[4294668.539000] VFS: Disk quotas dquot_6.5.1
[4294668.539000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.539000] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[4294668.539000] devfs: boot_options: 0x0
[4294668.539000] Initializing Cryptographic API
[4294668.539000] isapnp: Scanning for PnP cards...
[4294668.893000] isapnp: No Plug & Play device found
[4294668.913000] PNP: PS/2 controller doesn't have AUX irq; using default 0xc
[4294668.913000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
[4294668.913000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.913000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.913000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[4294668.913000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.914000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294668.916000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.916000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294668.916000] io scheduler noop registered
[4294668.916000] io scheduler anticipatory registered
[4294668.916000] io scheduler deadline registered
[4294668.916000] io scheduler cfq registered
[4294668.916000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
[4294668.917000] EISA: Probing bus 0 at eisa.0
[4294668.917000] Cannot allocate resource for EISA slot 4
[4294668.917000] EISA: Detected 0 cards.
[4294668.917000] NET: Registered protocol family 2
[4294668.927000] IP: routing cache hash table of 4096 buckets, 32Kbytes
[4294668.927000] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[4294668.927000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[4294668.928000] TCP: Hash tables configured (established 32768 bind 32768)
[4294668.928000] NET: Registered protocol family 8
[4294668.928000] NET: Registered protocol family 20
[4294668.928000] ACPI wakeup devices:
[4294668.928000] SLPB PCI0 USB0 USB1 USB2 LAN0 UAR1 LPT1
[4294668.928000] ACPI: (supports S0 S1 S4 S5)
[4294668.928000] Freeing unused kernel memory: 224k freed
[4294668.966000] Capability LSM initialized
[4294668.981000] NET: Registered protocol family 1
[4294668.984000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294669.009000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294669.009000] 8139cp: pci dev 0000:00:0a.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[4294669.009000] 8139cp: Try the "8139too" driver instead.
[4294669.011000] 8139too Fast Ethernet driver 0.9.27
[4294669.012000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
[4294669.012000] PCI: setting IRQ 12 as level-triggered
[4294669.012000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12
[4294669.012000] eth0: RealTek RTL8139 at 0xd000, 00:08:a1:35:99:bd, IRQ 12
[4294669.012000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[4294669.041000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294669.041000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294669.041000] ACPI: bus type ide registered
[4294669.052000] usbcore: registered new driver usbfs
[4294669.052000] usbcore: registered new driver hub
[4294669.054000] USB Universal Host Controller Interface driver v2.2
[4294669.054000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[4294669.054000] PCI: setting IRQ 11 as level-triggered
[4294669.054000] ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294669.054000] PCI: Via IRQ fixup for 0000:00:11.2, from 9 to 11
[4294669.054000] uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[4294669.116000] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
[4294669.116000] uhci_hcd 0000:00:11.2: irq 11, io base 0x0000d800
[4294669.116000] hub 1-0:1.0: USB hub found
[4294669.116000] hub 1-0:1.0: 2 ports detected
[4294669.119000] ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294669.119000] PCI: Via IRQ fixup for 0000:00:11.3, from 9 to 11
[4294669.119000] uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
[4294669.181000] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
[4294669.181000] uhci_hcd 0000:00:11.3: irq 11, io base 0x0000dc00
[4294669.181000] hub 2-0:1.0: USB hub found
[4294669.181000] hub 2-0:1.0: 2 ports detected
[4294669.411000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[4294671.239000] usbcore: registered new driver hiddev
[4294671.257000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:11.2-2
[4294671.257000] usbcore: registered new driver usbhid
[4294671.257000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294671.268000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[4294671.269000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[4294671.269000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294671.269000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 11
[4294671.269000] VP_IDE: chipset revision 6
[4294671.269000] VP_IDE: not 100% native mode: will probe irqs later
[4294671.269000] VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[4294671.269000]     ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:DMA
[4294671.269000]     ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:pio, hdd:DMA
[4294671.269000] Probing IDE interface ide0...
[4294671.653000] hda: Maxtor 6E040L0, ATA DISK drive
[4294671.908000] hdb: Maxtor 90648D3, ATA DISK drive
[4294671.959000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294671.959000] Probing IDE interface ide1...
[4294673.006000] hdd: LITE-ON DVDRW SOHW-1673S, ATAPI CD/DVD-ROM drive
[4294673.057000] ide1 at 0x170-0x177,0x376 on irq 15
[4294673.057000] Probing IDE interface ide2...
[4294673.570000] Probing IDE interface ide3...
[4294674.082000] Probing IDE interface ide4...
[4294674.594000] Probing IDE interface ide5...
[4294675.109000] hda: max request size: 128KiB
[4294675.817000] hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[4294675.818000] hda: cache flushes supported
[4294675.818000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
[4294675.847000] hdb: max request size: 128KiB
[4294676.769000] hdb: 12656448 sectors (6480 MB) w/512KiB Cache, CHS=12556/16/63, UDMA(33)
[4294676.769000] hdb: cache flushes not supported
[4294676.769000]  /dev/ide/host0/bus0/target1/lun0: p1
[4294676.779000] hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[4294676.779000] Uniform CD-ROM driver Revision: 3.20
[4294677.083000] ACPI: Fan [FAN] (on)
[4294677.087000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294677.087000] ACPI: Processor [CPU0] (supports 2 throttling states)
[4294677.089000] ACPI: Thermal Zone [THRM] (45 C)
[4294677.096000] vga16fb: initializing
[4294677.096000] vga16fb: mapped to 0xc00a0000
[4294677.224000] Console: switching to colour frame buffer device 80x30
[4294677.224000] fb0: VGA16 VGA frame buffer device
[4294677.407000] Attempting manual resume
[4294677.431000] swsusp: Suspend partition has wrong signature?
[4294677.461000] kjournald starting.  Commit interval 5 seconds
[4294677.461000] EXT3-fs: mounted filesystem with ordered data mode.
[4294678.706000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294682.240000] Adding 1510068k swap on /dev/hda5.  Priority:-1 extents:1
[4294682.443000] EXT3 FS on hda1, internal journal
[4294688.131000] parport: PnPBIOS parport detected.
[4294688.131000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[4294688.215000] lp0: using parport0 (interrupt-driven).
[4294688.233000] mice: PS/2 mouse device common for all mice
[4294688.254000] Linux agpgart interface v0.101 (c) Dave Jones
[4294688.290000] nvidia: module license 'NVIDIA' taints kernel.
[4294688.298000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[4294688.299000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7667  Fri Jun 17 07:01:04 PDT 2005
[4294691.080000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294691.789000] cdrom: open failed.
[4294694.259000] agpgart: Detected VIA KT266/KY266x/KT333 chipset
[4294694.283000] agpgart: AGP aperture is 64M @ 0xe0000000
[4294694.383000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294694.390000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294694.390000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294694.582000] Linux video capture interface: v1.00
[4294694.653000] cx2388x v4l2 driver version 0.0.4 loaded
[4294694.659000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[4294694.659000] PCI: setting IRQ 5 as level-triggered
[4294694.659000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[4294694.659000] cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert [card=5,autodetected]
[4294694.821000] cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01
[4294694.867000] cx88[0]: registered IR remote control
[4294694.867000] cx88[0]/0: found at 0000:00:0b.0, rev: 5, irq: 5, latency: 32, mmio: 0xe6000000
[4294694.886000] tuner 0-0060: chip found @ 0xc0 (cx88[0])
[4294694.886000] tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
[4294694.949000] tda9885/6/7: chip found @ 0x86
[4294694.975000] cx88[0]/0: registered device video0 [v4l2]
[4294694.977000] cx88[0]/0: registered device vbi0
[4294694.978000] cx88[0]/0: registered device radio0
[4294695.220000] irda_init()
[4294695.220000] NET: Registered protocol family 23
[4294695.744000] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[4294696.747000] gameport: EMU10K1 is pci0000:00:14.1/gameport0, io 0xec00, speed 1193kHz
[4294698.391000] Real Time Clock Driver v1.12
[4294698.479000] input: PC Speaker
[4294698.571000] Floppy drive(s): fd0 is 1.44M
[4294698.588000] FDC 0 is a post-1991 82077
[4294699.494000] ts: Compaq touchscreen protocol output
[4294700.024000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[4294700.215000] CSLIP: code copyright 1989 Regents of the University of California
[4294700.219000] PPP generic driver version 2.4.2
[4294700.244000] NET: Registered protocol family 17
[4294700.262000] NET: Registered protocol family 10
[4294700.262000] Disabled Privacy Extensions on device c02eb280(lo)
[4294700.263000] IPv6 over IPv4 tunneling driver
[4294700.598000] NET: Registered protocol family 24
[4294702.909000] ACPI: Power Button (FF) [PWRF]
[4294702.909000] ACPI: Power Button (CM) [PWRB]
[4294702.909000] ACPI: Sleep Button (CM) [SLPB]
[4294702.997000] Using specific hotkey driver
[4294703.050000] ibm_acpi: ec object not found
[4294704.557000] ip_tables: (C) 2000-2002 Netfilter core team
[4294708.080000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4294708.080000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[4294708.080000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[4294708.455000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4294708.455000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[4294708.455000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[4294710.289000] eth0: no IPv6 routers present
[4294713.756000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294713.756000] apm: overridden by ACPI.
[4294714.552000] Bluetooth: Core ver 2.7
[4294714.552000] NET: Registered protocol family 31
[4294714.552000] Bluetooth: HCI device and connection manager initialized
[4294714.552000] Bluetooth: HCI socket layer initialized
[4294714.577000] Bluetooth: L2CAP ver 2.7
[4294714.577000] Bluetooth: L2CAP socket layer initialized
[4294714.629000] Bluetooth: RFCOMM ver 1.5
[4294714.629000] Bluetooth: RFCOMM socket layer initialized
[4294714.629000] Bluetooth: RFCOMM TTY layer initialized
[4297073.216000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4297073.216000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[4297073.216000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[4297073.537000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[4297073.537000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[4297073.538000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
I'v recently installed tvtime and ran it for the first time and i managed to get a crappy picture (not b&w through) and a very poor sound, but it still worked, but when i ran it for the second time i got this:
Code:
ubuntu@User:~$ sudo tvtime
Running tvtime 0.9.15.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/User/.tvtime/tvtime.xml
videoinput: Tuner refuses to tell us the current frequency: Invalid argument
videoinput: Please file a bug report at tvtime.net
This is the last thing for me to do to completely move from windows to linux, so please guys help me :/
If more info needed please ask.
Thanks in advance.
Last edited by zerooo; 09-17-2005 at 04:23 PM.
 
Old 09-17-2005, 03:17 PM   #2
solarmax
LQ Newbie
 
Registered: Nov 2004
Location: London, UK
Distribution: Ubuntu 6.06 Dapper Drake
Posts: 11

Rep: Reputation: 1
Hi.
Do you have "Xawtv"? if so then type following as a normal user.
Code:
scantv
let me know how this goes...

Where do u live? if u live in the same country as mine, I can give u my channel configuration file...
Last edited by solarmax; 09-17-2005 at 03:19 PM.
 
Old 09-17-2005, 04:23 PM   #3
zerooo
LQ Newbie
 
Registered: Mar 2005
Posts: 5

Original Poster
Rep: Reputation: 0
Somehow i managed to get it work on tvtime (atlast!) thx anyways
 
Old 09-17-2005, 06:17 PM   #4
solarmax
LQ Newbie
 
Registered: Nov 2004
Location: London, UK
Distribution: Ubuntu 6.06 Dapper Drake
Posts: 11

Rep: Reputation: 1
Post
hi again,
Assuming you are not lying, you might want to post information on how you made it work. That way other users like you can benifit from it .

I have got three TV cards and on of them is exactly same as yours and i never managed to make it work under linux. other two ( Hauppague bt848 & Hauppague bt878 ) works flawlessly.
 
Old 09-18-2005, 02:18 AM   #5
zerooo
LQ Newbie
 
Registered: Mar 2005
Posts: 5

Original Poster
Rep: Reputation: 0
Hm... here i made few screens:
Code:
http://img190.imageshack.us/img190/345/19ye1.jpg
Code:
http://img187.imageshack.us/img187/1108/20bm1.jpg
Code:
http://img191.imageshack.us/img191/5804/current21vp.jpg
Quality is poor, but it's better than nothing.
I did nothing special, just started tvtime and played with it's settings. Selected right frequency table and television standart, scanned channel list and it works
here is my tvtime.xml if you are interested

Code:
<?xml version="1.0"?>
<!DOCTYPE tvtime PUBLIC "-//tvtime//DTD tvtime 1.0//EN" "http://tvtime.sourceforge.net/DTD/tvtime1.dtd">
<tvtime xmlns="http://tvtime.sourceforge.net/DTD/">
  <option name="DefaultBrightness" value="30"/>
  <option name="DefaultContrast" value="40"/>
  <option name="DefaultSaturation" value="100"/>
  <option name="DefaultHue" value="50"/>
  <option name="PrevChannel" value="140"/>
  <option name="Channel" value="2"/>
  <option name="FramerateMode" value="0"/>
  <option name="OverScan" value="3.5"/>
  <option name="CheckForSignal" value="1"/>
  <option name="AudioBoost" value="0"/>
  <option name="AlwaysOnTop" value="1"/>
  <option name="QuietScreenshots" value="0"/>
  <option name="UnmuteVolume" value="-1"/>
  <option name="Muted" value="0"/>
  <option name="V4LInput" value="0"/>
  <option name="AudioMode" value="stereo"/>
  <option name="PalDKMode" value="1"/>
</tvtime>
 
Old 09-18-2005, 09:59 AM   #6
riba43
Member
 
Registered: Feb 2005
Location: Slovenia
Distribution: suse11.0
Posts: 749

Rep: Reputation: 31
zer000, try this to check your card:

as root run the following command:

1. tvtime -hwscan
2. tvtime-scanner
 
Old 01-06-2006, 04:06 AM   #7
Jongi
Senior Member
 
Registered: Aug 2003
Distribution: Debian Sid 32/64-bit, F10 32/64-bit
Posts: 1,070

Rep: Reputation: 45
That's better quality then I get.

riba, what are the above 2 commands meant to do?
 
Old 01-06-2006, 05:56 AM   #8
riba43
Member
 
Registered: Feb 2005
Location: Slovenia
Distribution: suse11.0
Posts: 749

Rep: Reputation: 31
jongi,

1. Reading configuration from /etc/tvtime/tvtime.xml
2. Scanning using TV standard NTSC or PAL.
Scanning from 44,00 MHz to 958,00 MHz.
 
Old 02-01-2006, 07:56 AM   #9
Jongi
Senior Member
 
Registered: Aug 2003
Distribution: Debian Sid 32/64-bit, F10 32/64-bit
Posts: 1,070

Rep: Reputation: 45
And how did you take those screenshots?
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Leadtek TV2000XP Expert in Black and White!!! akulah Linux - Hardware 1 03-20-2005 06:23 PM
Winfast TV Expert with Suse 9.2 CrazyDelta Linux - Newbie 20 03-17-2005 12:41 PM
Winfast TV 2000 Xp Expert Dimega Linux - Hardware 2 01-12-2005 05:59 PM
winfast tv 2000 xp expert netsurf Linux - Newbie 8 12-08-2004 04:32 PM
new winfast tv2000 expert cratos Slackware 7 06-12-2004 12:48 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 05:27 PM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration