What Hardware Do You Need Drivers For?

caspianhiro · 04-03-2007, 04:30 AM

Hauppauge WinTV-HVR-1600 Model 01178

http://www.hauppauge.com/pages/produ...a_hvr1600.html

I too suffer from the bait and switch they pulled on us.

Thanks,
Eric Collins

almatic · 04-03-2007, 07:43 AM

Manufacturer: Creative Labs
Product : X-Fi

they have a site opensource.creative.com, where they announce a closed source driver for over a year now. How silly is that !?

AttacheCrime · 05-30-2007, 03:14 PM

Turtle Beach
Montego DDL 5.1

Robert Litt · 08-03-2007, 07:05 PM

Plextor
PX-708UF

likemindead · 08-23-2007, 09:56 PM

I have a MITSUMI CR-48X9TE that I can't get to work. It sees everything as "Blank" and won't read or burn anything. Is there a firmware and/or driver update that I need? My LITEON DVD-ROM LTD-163 drive is working great, but it's not a burner, so I need to get the MITSUMI working. Thanks in advance....

alokkumar · 08-28-2007, 10:21 AM

motorola
motorazer

ezor · 08-29-2007, 01:44 PM

Samsung

Model ML-2510

dblade · 09-10-2007, 09:44 PM

Hauppauge
WinTV-HVR-1600

G0KFS · 10-30-2007, 12:52 PM

Hi all,
I am using a TAXAN 17" colour monitor Model: ERGOVISION735 TCO99
at the base of which is a 4 port USB hub.
I have just switch from XP to Freespire v2.0.6 and the hub is not working. Are there any Linux drivers for this monitor.?

farslayer · 10-30-2007, 01:55 PM

Quote:

Originally Posted by ezor

Samsung

Model ML-2510

There IS a driver for that from the manufacturer for that device...

Samsung Unified Linux driver for the ML-2510

There is also a link to the Samsung driver in the openprinting.org database..

abrindell · 12-15-2007, 06:25 PM

Mag Innovision
LT716S

farslayer · 12-15-2007, 07:54 PM

Quote:

Originally Posted by abrindell

Mag Innovision
LT716S

http://www.maginnovision.com/Product...sn=464&pi=1459

Horizontal Freq. (KHz) 31 - 81 KHz
Vertical Freq. (Hz) 60 - 75 Hz

Use those values in your /etc/X11/xorg.conf file

Code:

Section "Monitor"
        Identifier      "Generic Monitor"
        Option          "DPMS"
        HorizSync       31-81
        VertRefresh     60-75

need_MCE · 01-18-2008, 04:51 PM

Turtle Beach
Montego DDL 7.1 sound card

dblade · 01-19-2008, 12:15 AM

Hauppage WinTV-HVR-1600 beta available (have not tested)

From the hauppauge support site 01/19/08

Quote:

Can I use the WinTV-HVR-1600 with Linux?

There is a new beta from LinuxTV.org with a Conexant cx23418 driver which supports the Hauppauge WinTV-HVR-1600 card.

The driver is available here:

http://www.linuxtv.org/hg/~hverkuil/cx18

The easiest way to build it is to get the tar.bz2 archive:

http://www.linuxtv.org/hg/~hverkuil/...ve/tip.tar.bz2

Unpack, 'make', 'make install' (as root), 'make unload' (as root) and run 'modprobe cx18'.

There is still a lot of work to be done, in particular there is nosupport for the ATSC stream. What is working is basic MPEG capturing, raw YUV capture and raw PCM capture. Also pretty much all of the controls that were also in ivtv are working with cx18.

The firmware needs to be extracted from the Windows Hauppauge HVR-1600 driver, available here:

http://hauppauge.lightpath.net/softw...e_cd_3.4d1.zip

Unzip, then copy the following files to the firmware directory and rename them as follows:

Drivers/Driver18/hcw18apu.rom -> v4l-cx23418-apu.fw Drivers/Driver18/hcw18enc.rom -> v4l-cx23418-cpu.fw Drivers/Driver18/hcw18mlC.rom -> v4l-cx23418-dig.fw

Note that if you get the message "Could not start the CPU" then edit cx18-firmware.c, go to line 350 and change the '#if 0' to '#if 1' and see if that helps. It is not clear to me whether that is needed or not, I get conflicting results.

Shadowmeph · 06-13-2008, 12:40 PM

Quote:

Originally Posted by dblade

Hauppage WinTV-HVR-1600 beta available (have not tested)

From the hauppauge support site 01/19/08

the driver link doesn't work anymore
when I bought this card last year I was running vista now I am away from all microsoft things and am running both Ubuntu Hardy and Arch Linux

Hauppauge
WinTV-HVR-1600