LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   Webcam Logitech Quickpro 5000 (https://www.linuxquestions.org/questions/linux-hardware-18/webcam-logitech-quickpro-5000-a-430976/)

Raffaele72 04-02-2006 11:30 AM

Webcam Logitech Quickpro 5000
 
Hi everybody,
I'm trying to complete my webcam configuration.

Below I copy the streamer output.

master@cray1:~$ streamer -d -c /dev/video0 -b 16 -t 0:05 -s 320x240 -o test.avi
checking writer files [multiple image files] ...
video name=ppm ext=ppm: ext mismatch [need avi]
video name=pgm ext=pgm: ext mismatch [need avi]
video name=jpeg ext=jpeg: ext mismatch [need avi]
checking writer raw [single file, raw video data] ...
video name=rgb ext=raw: ext mismatch [need avi]
video name=gray ext=raw: ext mismatch [need avi]
video name=422 ext=raw: ext mismatch [need avi]
video name=422p ext=raw: ext mismatch [need avi]
video name=4mpeg ext=yuv: ext mismatch [need avi]
video name=4mpeg-o ext=yuv: ext mismatch [need avi]
checking writer avi [Microsoft AVI (RIFF) format] ...
video name=rgb15 ext=avi: OK
avi / video: 15 bit TrueColor (LE) / audio: none
vid-open: trying: v4l2-old...
vid-open: failed: v4l2-old
vid-open: trying: v4l2...
v4l2: open
v4l2: device info:
usbvideo 0.1.0 / @ 0000:00:02.1
vid-open: ok: v4l2
movie_init_writer start
setformat: 15 bit TrueColor (LE) (320x240): failed
setformat: 15 bit TrueColor (BE) (320x240): failed
no way to get: 320x240 15 bit TrueColor (LE)
movie writer initialisation failed
v4l2: close

What's wrong?
Thanks for help.

paragn 04-03-2006 04:08 AM

hi,
Which driver r you using? are you using spca5xx driver for Quickcam pro 5000?? From where you installed streamer ??

Raffaele72 04-03-2006 12:00 PM

hi,

I'm using UVCVIDEO driver from linux-uvc.berlios .de
The streamer command belong at xawtv (release 3.95) package, linux.bytesex. org/xawtv/.

Bye and thanks for help.

paragn 04-03-2006 11:19 PM

i think u better recompile xawtv package and then use streamer

Raffaele72 04-09-2006 11:39 AM

Hi,
now the webcam works, or better I think that it had always worked. Was the software like gnomemeeting that doesn't support v4l2 devices, with EKIGA all works. Now I read that xawtv is v4l2 compatible so I think that there is something about xawtv'sconfiguration.

paragn 04-10-2006 12:15 AM

hi,
try asking your problem on freenode irc's #v4l channel

rastiazul 12-17-2007 01:39 PM

that channel doesnt exist

paragn 12-27-2007 10:48 PM

strange currently I am logged in that channel.


All times are GMT -5. The time now is 10:44 PM.