LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 08-16-2003, 02:56 PM   #1
goodman
LQ Newbie
 
Registered: Aug 2003
Posts: 8

Rep: Reputation: 0
Question video driver for Prosavage KM266


Hi,

I installed RH 9 on my new system which has an on-board
Prosavage KM266 vedio card. However, RH 9 is not able to
find a suitable driver for it. RH 9 use the "Vesa" for the video
card, and therefore the resolution is always very low.

Anybody can tell me where I can find the driver for my video card for Red Hat 9. I can find one for Red Hat 8, but it doen't work when I install in Red Hat 9.

Thanks in advance.
 
Old 08-20-2003, 02:43 PM   #2
CodeHawk
LQ Newbie
 
Registered: Aug 2003
Location: chicago
Distribution: Redhat 7.x 8,9 win2k, Novell
Posts: 7

Rep: Reputation: 0
S3 Prosavage

Well it seems S3 Prosavage is creating hell w/Linux all over the place these days .
This is how i fixed my display from turning blank, black screen or garbled mess.. Yes i tried trio64 vesa etc.. and others and had no luck

The 10 steps to having your GUI back.

Worked for me I hope you too.

1. Install Redhat 9 in text mode.

2. install your services blaa blaa.

3. Chose your video card, humm It detected a S3 savage KM133, (i did try this first it does not work) Thats not what i have on my system. I have a S3 savage8 ProsavageDDR KM266. At least that what they tell me. (yes I'm sure). Mine is integrated in to the motherboard. anyway Chose unsuported vga device res 800x600. If your video ram is set in bios set it for what ever you configed it at 8-16-32-what ever.

4. make sure you chose boot to command line. dont use lilo or grub. just #.

5 .login as root .. or befor you go any further try startx and see what happens? you can always use ctrl alt backspace to unload the xwin service.

6 ok i'm going to assum its still f***** up at this point.

7. If you have already installed your OS and set lilo or grub as boot loader you can hold down on the ctrl alt F2 keys to get to a text based login screen.

8. you must create a XFree86.new file to do this run command >> # XFree86 -configure << at # promt. the results will be a file called XFree86Config.new

9. Copy this file to the /etc/X11/XF86Config directory
example : cp XFree86Config.new /etc/X11/XF86Config

10 Start xwindows startx. Enjoy, Worked for me. Only took 11 hours of bs to figure out but hay it works now and i can tweak it from here.

Codehawk
Peace.......

Last edited by CodeHawk; 08-25-2003 at 01:45 PM.
 
Old 08-21-2003, 12:35 AM   #3
goodman
LQ Newbie
 
Registered: Aug 2003
Posts: 8

Original Poster
Rep: Reputation: 0
command configure

hi,

where do I call command "configure". My linux does not recognize
this command. I have already installed the linux. Based on your
instruction, I just need to create a new XF86Config, is it right?

Thanks a lot
 
Old 08-21-2003, 12:37 AM   #4
arunshivanandan
Member
 
Registered: May 2003
Location: Kerala,India
Distribution: RedHat,Mandrake,Debian
Posts: 643

Rep: Reputation: 30
use 'xf86config' to create new XF86Config file
 
Old 08-21-2003, 08:18 AM   #5
CodeHawk
LQ Newbie
 
Registered: Aug 2003
Location: chicago
Distribution: Redhat 7.x 8,9 win2k, Novell
Posts: 7

Rep: Reputation: 0
corrected sorry was in a hurry, all linux commands are case sensitive

XFree86 -configure



you can test fire X by typing >> XFree86 -xf86config /root/XF86Config.new << if your x service fires up and you can see a mouse, your in.

copy the new file >>
cp XFree86Config.new /etc/X11/XF86Config

startx

done.


codehawk
peace.....

Last edited by CodeHawk; 08-21-2003 at 08:36 AM.
 
Old 08-21-2003, 11:08 PM   #6
goodman
LQ Newbie
 
Registered: Aug 2003
Posts: 8

Original Poster
Rep: Reputation: 0
After I running the command, first I have hte following error message:

Fatal server error:
Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock
and start again.


When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
Please report problems to xfree86@xfree86.org.

I rename the X0-lock and redo it, I got the following messge:
_XSERVTransSocketINETCreateListener: ...SocketCreateListener() failed
_XSERVTransMakeAllCOTSServerListeners: server already running

Fatal server error:
Cannot establish any listening sockets - Make sure an X server isn't already running

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to xfree86@xfree86.org.

thanks for your help
 
Old 08-22-2003, 02:48 AM   #7
arunshivanandan
Member
 
Registered: May 2003
Location: Kerala,India
Distribution: RedHat,Mandrake,Debian
Posts: 643

Rep: Reputation: 30
make sure that you are trying startx from text mode.also ,check /var/log/XFree.0.log to see whether your system uses XF86Config or XF86Config-4 file(XFree 4.x will check for the later one first.).if it uses the -4 file,then delete the -4 one and proceed with the other one.you can create a new XF86Config using 'xf86config' or redhat-config-xfree.
 
Old 08-25-2003, 01:38 PM   #8
CodeHawk
LQ Newbie
 
Registered: Aug 2003
Location: chicago
Distribution: Redhat 7.x 8,9 win2k, Novell
Posts: 7

Rep: Reputation: 0
Well it seems S3 Prosavage is creating hell w/Linux all over the place these days

PART 2

after checking around and looking for updated drivers I found there was'nt a driver i could really use or should i say a driver that would work worth a penny with my board and builtin Video card.

After Getting my GUI back to where i could at least read my screen 800x600 256 colors.

i noticed there where 58 available updates from RHN for RedHat 9

I applied updates that pertained to my server config.

after completing the updates I tryed a few other res and driver configurations having no luck I said just screw it. Not!! I don't give up, ever...

I'll keep trying, a couple hours went by, Sometimes it helps just to walk away.

I came back sit down and loaded VESA driver /w the default probe done on the Video card which was S3 Prosavage KM133
with 16mg mem. 800x600 16m colors.

Keep in mind this would not work when i was installing RH9 from the start. i could'nt install from xwin GUI, I had to do a linux text install.

I logged out. startx and KaBaNG VICTORY! it works in all res's and colors.

Why does it work now? Maybe the updates? what else could it have been? anyway ....its working perfect.

I hope this will help others, any Q'z I'll try to help

Codehawk
peace.......
 
Old 08-26-2003, 12:23 AM   #9
goodman
LQ Newbie
 
Registered: Aug 2003
Posts: 8

Original Poster
Rep: Reputation: 0
Thanks for your information, but which update do you think may
make the improvement. where can I get it ?

Thanks
 
Old 08-26-2003, 10:13 AM   #10
CodeHawk
LQ Newbie
 
Registered: Aug 2003
Location: chicago
Distribution: Redhat 7.x 8,9 win2k, Novell
Posts: 7

Rep: Reputation: 0
http://redhat.com after installing Redhat 9 you will be asked to sign-up for updates news and so on.

what are you doing setting up a server ? workstation? desktop? What services are you installing.

What is your bios configuration? Sometimes you need to alter HD and video speed and ram settings. What type of motherboard are you using? What chip set??thats a big one...

I have had times when i'v had to flash a bios in order to get a system running. I'v had to disable com ports in order to get the Os to recognize the com port that i disabled, sounds strange but i'v had to do these things.

All these plus make a big deference in what services and servers you install on your system.
The errors that are happening sound like your xwin service is starting twice.

My configuration that works is as follows:

I have a 40gb HD
My partictions are :
/boot 99mg
/ root 1000mb
/usr 2560mg
/home (auto fill) this is the only prt thats not a fixed size.(auto fill)
/var 1024
/tmp 1524
/chroot 1024
/var/lib 1549
<sawp> 1024

here is a copy of my Xfree86 config file. that works.

# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
ModulePath "/usr/X11R6/lib/modules"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "record"
Load "xtrap"
Load "speedo"
Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/mouse"
EndSection

Section "Monitor"

#DisplaySize 280 210 # mm
Identifier "Monitor0"
VendorName "NEC"
ModelName "NEC MultiSync XE15"
HorizSync 31.0 - 65.0
VertRefresh 55.0 - 120.0
Option "DPMS"
EndSection

Section "Device"

### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "UseBIOS" # [<bool>]
#Option "LCDClock" # <freq>
#Option "ShadowStatus" # [<bool>]
#Option "VideoRAM" # <i>
#Option "CrtOnly" # [<bool>]
#Option "TvOn" # [<bool>]
#Option "PAL" # [<bool>]
#Option "ForceInit" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "S3 Inc."
BoardName "S3 ProSavage KM133"
VideoRam 16384
BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 1
EndSubSection
SubSection "Display"
Depth 4
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
EndSubSection
EndSection

codehawk
peace.....

Last edited by CodeHawk; 08-26-2003 at 10:16 AM.
 
Old 09-13-2003, 07:35 PM   #11
twinkers
Member
 
Registered: Aug 2003
Distribution: Debian Sid
Posts: 153

Rep: Reputation: 30
Well, tried to get this done on a friends SuSE box but the monitor just keeps blinking out of range. Tried the lot but still get stuck with the vesa driver at low res. Anyone did get it to work on SuSE 8.2? (he's got the integrated S3 savage8 ProsavageDDR KM266)

Regards
 
Old 10-01-2004, 02:29 AM   #12
GustavoRuiz
LQ Newbie
 
Registered: Oct 2004
Posts: 4

Rep: Reputation: 0
redhat 9 + ProSavage

I had the same problem today...

There is a poorly documented option, named UseBIOS from the Savage driver, that enables or disables the video BIOS to change graphic modes.
If you disabled it, the X-Windows work!

Example of my XF86Config with option UseBIOS disabled:

Section "Device"
Identifier "Videocard0"
Driver "savage"
VendorName "Videocard vendor"
BoardName "S3 ProSavage KM133"
Option "UseBIOS" "no"
EndSection

More info about other options at:
http://www.die.net/doc/linux/man/man4/savage.4.html
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems installing my video S3 Grhaphics Prosavage on Debian cayasso Debian 2 11-17-2004 10:36 PM
X and ProSavage KM266 and a couple of Fed. Qs. 95se Linux - Hardware 2 02-21-2004 10:37 AM
S3 Prosavage 8 onboard driver spookiwi Linux - Hardware 1 11-29-2003 12:53 AM
RedHat 9.0 and Via Prosavage KM 266 Driver... siddiqu Linux - Hardware 5 11-12-2003 06:30 AM
no video with S3 proSavage KM133 harsh Linux - Hardware 3 10-25-2003 12:08 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 09:58 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration