LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 01-17-2006, 06:58 PM   #1
bluesmanu
Member
 
Registered: May 2005
Location: Geneve
Distribution: Fedora 12
Posts: 48

Rep: Reputation: 15
USB ports problem


Hey!

USB is not working on my PC. In dmesg i get this (skiping irrelevant) :

ehci_hcd 0000:00:02.2: EHCI Host Controller
ehci_hcd 0000:00:02.2: debug port 0
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.2: irq 5, io mem 0xff6fdc00
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: park 0
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
hub 1-0:1.0: over-current change on port 1
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 5, io mem 0xff6fb000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
hub 1-0:1.0: over-current change on port 2
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: OHCI Host Controller
hub 1-0:1.0: over-current change on port 3
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.1: irq 3, io mem 0xff6fc000
hub 1-0:1.0: over-current change on port 4
hub 1-0:1.0: over-current change on port 5
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
hub 1-0:1.0: over-current change on port 6
hub 1-0:1.0: over-current change on port 7
hub 1-0:1.0: over-current change on port 8

As you can see, it is detecting 3 different usb hub (1-0, 2-0 and 3-0) with 8, 4 and 4 ports. All ports from hub 1-0 get a "over-current change on port n".

I don't have any external hub, just my motherboard (which can support up to 8 ports but has only 4 connected).

Please help me!!

PS : mobo is fine, USB ports are working under WinXP.

Manu
 
Old 01-18-2006, 01:15 PM   #2
bluesmanu
Member
 
Registered: May 2005
Location: Geneve
Distribution: Fedora 12
Posts: 48

Original Poster
Rep: Reputation: 15
Problem solved.
 
Old 08-05-2006, 06:12 PM   #3
shievelet
LQ Newbie
 
Registered: May 2006
Distribution: LFS
Posts: 18

Rep: Reputation: 0
old thread, i know

but does anyone have a solution to the "over-current change" problem?
 
Old 08-07-2006, 06:18 PM   #4
sam_hall
LQ Newbie
 
Registered: Aug 2006
Posts: 1

Rep: Reputation: 0
Yes, old thread but still need remedy. (Help)

I am seeing the same issue with the /var/log/warn logs:

Jul 29 11:06:03 kernel: end_request: I/O error, dev fd0, sector 0
Jul 29 11:06:03 kernel: end_request: I/O error, dev fd0, sector 0
Jul 29 11:06:04 kernel: hub 4-0:1.0: over-current change on port 1
Jul 29 11:06:04 kernel: hub 4-0:1.0: over-current change on port 2
Jul 29 11:06:04 kernel: hub 5-0:1.0: over-current change on port 7
Jul 29 11:06:04 kernel: hub 5-0:1.0: over-current change on port 8

These entries are present immediatley prior to a complete system halt requiring a system restart.
Of all 60+ application servers that are effected, I have nothing plugged into the usb ports.

I have recently upraded the SuSe 9 kernel to 2.6.11 thinking it was he old kernel causing the issue. NO change in behavior. The hardware specs are as follows:

- SuperMicro "SuperServer" 6014H-82/8/X8
- 31GB HD
- 2x Intel Xeon 3.2Ghz processors
- 4 GB mem
- SuSe 9

There are two primary applications running on these. So an "overload" of application -> resources is out of the question.

I have attempted to remove the USB modules altogether to no avail:
Module Size Used by
ehci_hcd (removed) 37640 0
i2c_i801 10644 0
i2c_core 27776 1 i2c_i801
uhci_hcd (removed) 36512 0
edd 13216 0
joydev 13568 0
sg 45624 0
st 44452 0
sr_mod 20772 0
ide_cd 45344 0
cdrom 41896 2 sr_mod,ide_cd
floppy 68688 0
evdev 14208 0
usbcore (removed) 136944 3 ehci_hcd,uhci_hcd
e1000 96692 0
ipv6 299264 2058
subfs 11264 2
dm_mod 68800 0
piix 13700 0 [permanent]
ide_core 158372 2 ide_cd,piix
reiserfs 266352 1
aic79xx 278296 2
aic7xxx 202324 0
sd_mod 21376 3
scsi_mod 157008 6 sg,st,sr_mod,aic79xx,aic7xxx,sd_mod

Here is the dmesg output:

Bootdata ok (command line is root=/dev/sda2 vga=0x317 selinux=0 console=tty0 resume=/dev/sda1 elevator=cfq splash=silent)
Linux version 2.6.11.4-21.11-smp (geeko@buildhost) (gcc version 3.3.5 20050117 (prerelease) (SUSE Linux)) #1 SMP Thu Feb 2 20:54:26 UTC 2
006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
BIOS-e820: 00000000cff70000 - 00000000cff78000 (ACPI data)
BIOS-e820: 00000000cff78000 - 00000000cff80000 (ACPI NVS)
BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f5db0
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x00000000cff73abf
ACPI: FADT (v001 INTEL LINDHRST 0x06040000 PTL 0x00000003) @ 0x00000000cff77e20
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x00000000cff77e94
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x00000000cff77f48
ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x00000000cff77f70
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x00000000cff77fc0
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20030224) @ 0x00000000cff73afb
ACPI: DSDT (v001 Intel LINDHRST 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000130000000
Bootmem setup node 0 0000000000000000-0000000130000000
On node 0 totalpages: 1245184
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 1241088 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
Processor #6 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
Processor #7 15:4 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec81000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 32, address 0xfec81000, GSI 24-47
ACPI: IOAPIC (id[0x04] address[0xfec81400] gsi_base[48])
IOAPIC[2]: apic_id 4, version 32, address 0xfec81400, GSI 48-71
ACPI: IOAPIC (id[0x05] address[0xfec82000] gsi_base[72])
IOAPIC[3]: apic_id 5, version 32, address 0xfec82000, GSI 72-95
ACPI: IOAPIC (id[0x08] address[0xfec82400] gsi_base[96])
IOAPIC[4]: apic_id 8, version 32, address 0xfec82400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Checking aperture...
Built 1 zonelists
Kernel command line: root=/dev/sda2 vga=0x317 selinux=0 console=tty0 resume=/dev/sda1 elevator=cfq splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 3200.276 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Placing software IO TLB between 0x5efd000 - 0x7efd000
Memory: 4073064k/4980736k available (2282k kernel code, 0k reserved, 1180k data, 212k init)
Calibrating delay loop... 6324.22 BogoMIPS (lpj=3162112)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU0: Thermal monitoring enabled (TM1)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
ACPI: Looking for DSDT in initrd... not found!
not found!
Using IO APIC NMI watchdog
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
per-CPU timeslice cutoff: 1024.00 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/6 rip 6000 rsp ffff8100cfea7f58
Initializing CPU#1
Calibrating delay loop... 6389.76 BogoMIPS (lpj=3194880)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 3
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
Booting processor 2/1 rip 6000 rsp ffff8100cfedff58
Initializing CPU#2
Calibrating delay loop... 6389.76 BogoMIPS (lpj=3194880)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU2: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
Booting processor 3/7 rip 6000 rsp ffff8100cfc15f58
Initializing CPU#3
Calibrating delay loop... 6389.76 BogoMIPS (lpj=3194880)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 3
CPU3: Thermal monitoring enabled (TM1)
Intel(R) Xeon(TM) CPU 3.20GHz stepping 01
Total of 4 processors activated (25493.50 BogoMIPS).
activating NMI Watchdog ... done.
testing NMI watchdog ... CPU#1: NMI appears to be stuck (0)!
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
checking TSC synchronization across 4 CPUs: passed.
time.c: Using PIT/TSC based timekeeping.
Brought up 4 CPUs
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1.PXH0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1.PXH1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEY0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEY0.PXD0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEY0.PXD1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Simple Boot Flag at 0x39 set to 0x1
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1154196268.412:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
vesafb: framebuffer at 0xde000000, mapped to 0xffffc20010100000, using 6144k, total 8128k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
mtrr: type mismatch for de000000,400000 old: uncachable new: write-combining
mtrr: type mismatch for de000000,200000 old: uncachable new: write-combining
mtrr: type mismatch for de000000,100000 old: uncachable new: write-combining
mtrr: type mismatch for de000000,80000 old: uncachable new: write-combining
mtrr: type mismatch for de000000,40000 old: uncachable new: write-combining
mtrr: type mismatch for de000000,20000 old: uncachable new: write-combining
mtrr: type mismatch for de000000,10000 old: uncachable new: write-combining
mtrr: type mismatch for de000000,8000 old: uncachable new: write-combining
mtrr: type mismatch for de000000,4000 old: uncachable new: write-combining
mtrr: type mismatch for de000000,2000 old: uncachable new: write-combining
mtrr: type mismatch for de000000,1000 old: uncachable new: write-combining
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x800 base: 0xde000000
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x400 base: 0xde000000
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x200 base: 0xde000000
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x100 base: 0xde000000
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x80 base: 0xde000000
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x40 base: 0xde000000
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x20 base: 0xde000000
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x10 base: 0xde000000
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x8 base: 0xde000000
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x4 base: 0xde000000
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x2 base: 0xde000000
mtrr: size and base must be multiples of 4 kiB
mtrr: size: 0x1 base: 0xde000000
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 36496 bytes,<6>...found (1024x768, 26481 bytes, v3).
Console: switching to colour frame buffer device 118x41
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12
Non-volatile memory driver v1.2
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize
loop: loaded (max 8 devices)
mice: PS/2 mouse device common for all mice
input: PC Speaker
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 32768 buckets, 512Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
ACPI wakeup devices:
PEX0 PXH1 PXD0 PXD1 PEZ0 USB1 USB2 USB3 USB4 EUSB PCIB KBC0 MSE0
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
SCSI subsystem initialized
ACPI: PCI interrupt 0000:03:03.0[A] -> GSI 32 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:03:03.1[B] -> GSI 33 (level, low) -> IRQ 177
Losing some ticks... checking if CPU frequency changed.
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

(scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|RTI|QAS, 16bit)
Vendor: SEAGATE Model: ST336754LC Rev: 0003
Type: Direct-Access ANSI SCSI revision: 03
scsi0:A:0:0: Tagged Queuing enabled. Depth 32
SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SUPER Model: GEM318 Rev: 0
Type: Processor ANSI SCSI revision: 02
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11
<Adaptec AIC7902 Ultra320 SCSI adapter>
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x14a8-0x14af, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: CD-224E, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ReiserFS: sda2: found reiserfs format "3.6" with standard journal
ReiserFS: sda2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: sda2: checking transaction log (sda2)
ReiserFS: sda2: replayed 18 transactions in 2 seconds
reiserfs: disabling flush barriers on sda2
ReiserFS: sda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 212k freed
Adding 4200424k swap on /dev/sda1. Priority:42 extents:1
ReiserFS: sda2: Removing [97311 15364554 0x0 SD]..done
ReiserFS: sda2: Removing [15062122 15318167 0x0 SD]..done
ReiserFS: sda2: There were 2 uncompleted unlinks/truncates. Completed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
subfs 0.9
NET: Registered protocol family 10
Disabled Privacy Extensions on device ffffffff80426300(lo)
IPv6 over IPv4 tunneling driver
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2-NAPI
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:04:02.0[A] -> GSI 54 (level, low) -> IRQ 193
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
ACPI: PCI interrupt 0000:04:02.1[B] -> GSI 55 (level, low) -> IRQ 201
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
st: Version 20041025, fixed bufsize 32768, s/g segs 256
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 6, lun 0, type 3
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 209
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 209, io base 0x1400
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 217, io base 0x1420
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 185, io base 0x1440
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 209
uhci_hcd 0000:00:1d.3: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: irq 209, io base 0x1460
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: over-current change on port 1
hub 4-0:1.0: over-current change on port 2
hw_random hardware driver 1.0.0 loaded
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 225
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 225, pci mem 0xdd001000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
hub 5-0:1.0: over-current change on port 7
hub 5-0:1.0: over-current change on port 8
eth1: no IPv6 routers present
eth0: no IPv6 routers present
ehci_hcd 0000:00:1d.7: remove, state 1
usb usb5: USB disconnect, address 1
ehci_hcd 0000:00:1d.7: USB bus 5 deregistered
uhci_hcd 0000:00:1d.0: remove, state 1
usb usb1: USB disconnect, address 1
uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
uhci_hcd 0000:00:1d.1: remove, state 1
usb usb2: USB disconnect, address 1
uhci_hcd 0000:00:1d.1: USB bus 2 deregistered
uhci_hcd 0000:00:1d.2: remove, state 1
usb usb3: USB disconnect, address 1
uhci_hcd 0000:00:1d.2: USB bus 3 deregistered
uhci_hcd 0000:00:1d.3: remove, state 1
usb usb4: USB disconnect, address 1
uhci_hcd 0000:00:1d.3: USB bus 4 deregistered
usbcore: deregistering driver usbfs
usbcore: deregistering driver hub
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
USB Ports dudeman41465 Linux - Hardware 1 10-12-2005 02:18 AM
USB 2.0 ports detected as USB 1.1 on Fedora Core 3 vbvamsi Linux - Hardware 1 10-09-2005 06:26 PM
whats the /dev/ device of my usb ports ? (for gnomeconfrernce (webcam problem)) qwijibow Linux - Newbie 1 12-27-2003 05:51 PM
problem with usb ports russellc Linux - Hardware 2 10-07-2003 09:54 PM
USB Ports danwhite1 Linux - Software 1 09-06-2001 11:12 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 06:22 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration