LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 12-30-2007, 05:49 PM   #1
zavataafnan
LQ Newbie
 
Registered: Dec 2007
Posts: 4

Rep: Reputation: 0
Usb Hard Disk Mount Error


Hi,
I can not mount USB flash , i search forum for this but i can not find my
case, when i use lsusb :

mosi@linux-jabar:~> lsusb
Bus 005 Device 003: ID 09da:0006 A4 Tech Co., Ltd Optical Mouse WOP-35 / Trust 450L Optical Mouse
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 035: ID 152d:2339
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000


device 152d:2339 , i think is my USB flash
I have SATA hard that have 5 partion 3 of them are for Windows partion and
i can mount them. but can not create sda7 that assign to my USB flash.

another similar problem is i have SATA HARD with SATA->USB corvertor , i can not see HARD .


Best Regards,
M.J.M.
 
Old 12-30-2007, 11:35 PM   #2
Nylex
LQ Addict
 
Registered: Jul 2003
Location: London, UK
Distribution: Slackware
Posts: 7,464

Rep: Reputation: Disabled
Could you post the exact commands you're using to mount the device, along with output from them (such as error messages) please?
 
Old 12-31-2007, 11:07 AM   #3
zavataafnan
LQ Newbie
 
Registered: Dec 2007
Posts: 4

Original Poster
Rep: Reputation: 0
first i plug my flash disk,
then i run lsusb

mosi@linux-jabar:~> lsusb

Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 09da:0006 A4 Tech Co., Ltd Optical Mouse WOP-35 / Trust 450L Optical Mouse
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
mosi@linux-jabar:~>
mosi@linux-jabar:~> lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 09da:0006 A4 Tech Co., Ltd Optical Mouse WOP-35 / Trust 450L Optical Mouse
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 011: ID 1307:0163
Bus 001 Device 001: ID 0000:0000
mosi@linux-jabar:~>

after some try of lsusb one device with ID :1307 and 0163 found but without any descripition!!!

i then run this command to see my disk :
mosi@linux-jabar:~> su
Password:
linux-jabar:/home/mosi # fdisk -l

Disk /dev/sda: 300.0 GB, 300090728448 bytes
255 heads, 63 sectors/track, 36483 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 1 6374 51199123+ 17 Hidden HPFS/NTFS
/dev/sda2 6375 24349 144384187+ 5 Extended
/dev/sda3 24350 25524 9438187+ 82 Linux swap / Solaris
/dev/sda4 * 25525 36483 88028167+ 83 Linux
/dev/sda5 6375 12748 51199123+ 17 Hidden HPFS/NTFS
/dev/sda6 12749 24349 93185001 17 Hidden HPFS/NTFS

something such as sda7 or sda8 or ... for flash disk was not be created!

sda1 and sda4 and sda5 is my windows partion that i can mount it .
thanks a lot.


Best Regards,
M.J.M.
 
Old 12-31-2007, 11:08 AM   #4
Nylex
LQ Addict
 
Registered: Jul 2003
Location: London, UK
Distribution: Slackware
Posts: 7,464

Rep: Reputation: Disabled
What does dmesg say?
 
Old 12-31-2007, 02:43 PM   #5
zavataafnan
LQ Newbie
 
Registered: Dec 2007
Posts: 4

Original Poster
Rep: Reputation: 0
when i try command dmesg the 6 last lines are:
usb 1-9: USB disconnect, address 11
usb 1-10: new high speed USB device using ehci_hcd and address 12
usb 1-10: string descriptor 0 read error: -110
usb 1-10: string descriptor 0 read error: -110
usb 1-10: string descriptor 0 read error: -110
usb 1-10: new device found, idVendor=1307, idProduct=0163
usb 1-10: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: configuration #1 chosen from 1 choice
usb 1-10: can't set config #1, error -71
usb 1-10: USB disconnect, address 12
usb 1-9: new high speed USB device using ehci_hcd and address 13
usb 1-9: string descriptor 0 read error: -110
usb 1-9: string descriptor 0 read error: -110

it seems that can not read descriptor.
my linux is SUSE 10.1



Best Regards,
M.J.M.
 
Old 12-31-2007, 08:05 PM   #6
michaelk
Moderator
 
Registered: Aug 2002
Posts: 21,590

Rep: Reputation: 4163Reputation: 4163Reputation: 4163Reputation: 4163Reputation: 4163Reputation: 4163Reputation: 4163Reputation: 4163Reputation: 4163Reputation: 4163Reputation: 4163
FYI vendor IDs:
152d JMicron Technology Corp. / JMicron USA Technology Corp.
2338 JM20337 Hi-Speed USB to SATA & PATA Combo Bridge

1307 Transcend Information, Inc.
0163 512MB USB Flash Drive

Your flash drive is 1307.

From the output of fdisk and dmesg neither drive is being recognized correctly. sda I assume is your internal drive. If the external drives were correctly recognized they would be assigned device IDs of sdb and sdc. Do not try to create additional partitions on sda.

Look at the output of the command lsmod. See if the module ehci-hcd is loaded. If it is remove it via the command.
modprobe -r ehci-hcd
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
unable to mount USB hard disk dmsreddy Linux - Hardware 13 11-04-2007 06:53 PM
Trying to mount a USB Hard Disk guarriman Linux - Hardware 2 07-12-2007 03:33 AM
How do I get my USB 2.0 Hard Disk to MOUNT? Hawky Linux - Newbie 5 10-26-2004 12:11 AM
How to mount my usb hard disk? raoqn Fedora 1 04-01-2004 05:21 AM
How to mount my USB mobile hard disk? tx-cary Linux - Hardware 13 02-02-2004 12:19 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 10:20 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration