LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 02-27-2004, 02:07 PM   #1
hackman
LQ Newbie
 
Registered: Feb 2004
Location: L'viv
Distribution: ASP Linux 9.0
Posts: 8

Rep: Reputation: 0
USB Flash drive don't want mount


I've installed new kernel 2.6.2! i can't use my USB flash drive!
i enter
mount /dev/sda /mnt/usb
the answer was /dev/sda is not valid block device

i thought that problems is in modules

i also add dmesg and lsmod output

dmesg
Linux version 2.6.2 (root@DM_linux) (gcc version 3.2.2 20030222 (ASPLinux 3.2.2-5asp)) #2 Fri Feb 27 17:04:21 EET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f7260
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Building zonelist for node : 0
Kernel command line: root=/dev/hda8 ro
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1338.554 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 255856k/262080k available (1593k kernel code, 5492k reserved, 491k data, 424k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2629.63 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 219k freed
CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) processor stepping 04
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1337.0636 MHz.
..... host bus clock speed is 267.0527 MHz.
NET: Registered protocol family 16
EISA bus registered
spurious 8259A interrupt: IRQ7.
PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040116
ACPI: IRQ11 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
Initializing Cryptographic API
Applying VIA southbridge workaround.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 32M @ 0xe8000000
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdcMA, hddio
hda: ST340016A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CD-ROM Philips PCA362CDA, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdc: ATAPI 36X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4bios S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT2-fs warning (device hda8): ext2_fill_super: mounting ext3 filesystem as ext2

Freeing unused kernel memory: 424k freed
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 11, io base 0000d400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: irq 11, io base 0000d800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
hub 1-0:1.0: new USB device on port 2, assigned address 2
Adding 329292k swap on /dev/hda9. Priority:-1 extents:1
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 1 port detected
hub 1-2:1.0: new USB device on port 1, assigned address 3
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
NTFS driver 2.1.6 [Flags: R/O MODULE].
NTFS volume version 3.1.
kudzu: numerical sysctl 1 23 is obsolete.
parport0: PC-style at 0x378 [PCSPP,EPP]
parport0: cpp_daisy: aa5500ff(00)
parport0: assign_addrs: aa5500ff(00)
parport0: cpp_daisy: aa5500ff(00)
parport0: assign_addrs: aa5500ff(00)
parport_pc: Via 686A parallel port: io=0x378
fealnx.c:v2.51 Nov-17-2001
eth0: 100/10M Ethernet PCI Adapter at 0xec00, 00:02:44:40:da:79, IRQ 11.
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
lp0: using parport0 (polling).
SCSI subsystem initialized
Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5
PCI: Setting latency timer of device 0000:00:07.5 to 64
ac97_codec: AC97 Audio codec, id: ICE17 (ICE1232)
via82cxxx: board #1 at 0xDC00, IRQ 9
<MPU-401 (UART) MIDI> at 0x330 irq 9 dma 0,0
Enabled Via MIDI
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
udf: registering filesystem
UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG fs/udf/super.c:1544:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:532:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG fs/udf/super.c:559:udf_vrs: ISO9660 Primary Volume Descriptor found
UDF-fs DEBUG fs/udf/super.c:562:udf_vrs: ISO9660 Supplementary Volume Descriptor found
UDF-fs DEBUG fs/udf/super.c:568:udf_vrs: ISO9660 Volume Descriptor Set Terminator found
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root











Lsmod
dmesg
Linux version 2.6.2 (root@DM_linux) (gcc version 3.2.2 20030222 (ASPLinux 3.2.2-5asp)) #2 Fri Feb 27 17:04:21 EET 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f7260
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
Building zonelist for node : 0
Kernel command line: root=/dev/hda8 ro
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1338.554 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 255856k/262080k available (1593k kernel code, 5492k reserved, 491k data, 424k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2629.63 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 219k freed
CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) processor stepping 04
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1337.0636 MHz.
..... host bus clock speed is 267.0527 MHz.
NET: Registered protocol family 16
EISA bus registered
spurious 8259A interrupt: IRQ7.
PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040116
ACPI: IRQ11 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
Initializing Cryptographic API
Applying VIA southbridge workaround.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 32M @ 0xe8000000
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdcMA, hddio
hda: ST340016A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CD-ROM Philips PCA362CDA, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdc: ATAPI 36X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
input: PS/2 Generic Mouse on isa0060/serio1
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S3 S4bios S5)
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
EXT2-fs warning (device hda8): ext2_fill_super: mounting ext3 filesystem as ext2

Freeing unused kernel memory: 424k freed
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 11, io base 0000d400
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: irq 11, io base 0000d800
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
hub 1-0:1.0: new USB device on port 2, assigned address 2
Adding 329292k swap on /dev/hda9. Priority:-1 extents:1
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 1 port detected
hub 1-2:1.0: new USB device on port 1, assigned address 3
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
NTFS driver 2.1.6 [Flags: R/O MODULE].
NTFS volume version 3.1.
kudzu: numerical sysctl 1 23 is obsolete.
parport0: PC-style at 0x378 [PCSPP,EPP]
parport0: cpp_daisy: aa5500ff(00)
parport0: assign_addrs: aa5500ff(00)
parport0: cpp_daisy: aa5500ff(00)
parport0: assign_addrs: aa5500ff(00)
parport_pc: Via 686A parallel port: io=0x378
fealnx.c:v2.51 Nov-17-2001
eth0: 100/10M Ethernet PCI Adapter at 0xec00, 00:02:44:40:da:79, IRQ 11.
end_request: I/O error, dev fd0, sector 0
end_request: I/O error, dev fd0, sector 0
lp0: using parport0 (polling).
SCSI subsystem initialized
Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5
PCI: Setting latency timer of device 0000:00:07.5 to 64
ac97_codec: AC97 Audio codec, id: ICE17 (ICE1232)
via82cxxx: board #1 at 0xDC00, IRQ 9
<MPU-401 (UART) MIDI> at 0x330 irq 9 dma 0,0
Enabled Via MIDI
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
via_audio: ignoring drain playback error -11
via_audio: ignoring drain playback error -11
udf: registering filesystem
UDF-fs DEBUG fs/udf/lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0
UDF-fs DEBUG fs/udf/super.c:1544:udf_fill_super: Multi-session=0
UDF-fs DEBUG fs/udf/super.c:532:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG fs/udf/super.c:559:udf_vrs: ISO9660 Primary Volume Descriptor found
UDF-fs DEBUG fs/udf/super.c:562:udf_vrs: ISO9660 Supplementary Volume Descriptor found
UDF-fs DEBUG fs/udf/super.c:568:udf_vrs: ISO9660 Volume Descriptor Set Terminator found
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root


<B>Please Help</B>
 
Old 02-27-2004, 03:49 PM   #2
sohmc
Member
 
Registered: Aug 2002
Location: Alexandria
Distribution: ubuntu 12.04.2
Posts: 217

Rep: Reputation: 30
It would help out if you put that kind of data in code brackets.

have you tried "/dev/sda1" instead of just "/dev/sda"? I usually have to put a 1 in order to get it to work.
 
Old 02-28-2004, 02:57 AM   #3
hackman
LQ Newbie
 
Registered: Feb 2004
Location: L'viv
Distribution: ASP Linux 9.0
Posts: 8

Original Poster
Rep: Reputation: 0
i ve tried sda1! the result was the same! sda1 s not valid block device
 
Old 02-28-2004, 07:00 AM   #4
sohmc
Member
 
Registered: Aug 2002
Location: Alexandria
Distribution: ubuntu 12.04.2
Posts: 217

Rep: Reputation: 30
what is lsmod giving you?
 
Old 02-12-2005, 01:34 AM   #5
deoren
Member
 
Registered: Oct 2003
Location: USA
Distribution: Ubuntu
Posts: 216

Rep: Reputation: 30
You might want to try /dev/sdb1 also.

Try this:

Code:
dmesg | grep "sd"
and check your output then. That ought to give you something useful. It works for the 2.4 kernel anyway. I'm not well versed with the 2.6 kernel.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
How to mount a USB flash drive? tuxuser19 Debian 5 11-09-2005 07:05 PM
USB flash drive mount problem servnov Linux - General 4 10-10-2005 09:08 PM
Can't mount USB Flash Drive on debian woody Chrysalid Linux - Hardware 1 07-31-2005 07:37 AM
Upgraded to 2.6.9, now I can't mount usb flash drive DigitalCubano Linux - Hardware 3 01-23-2005 06:23 PM
usb flash drive won't mount Snocrash Linux - Hardware 7 01-22-2004 04:02 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 08:17 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration