LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 09-12-2005, 07:24 AM   #1
Optimistic
Member
 
Registered: Jun 2004
Location: Germany
Distribution: Debian (testing)
Posts: 276

Rep: Reputation: 33
TV Card Problems


Hey All,

I updated my kernel to 2.6.11 on Debian Testing and now my TV Card doesn't work. It worked before (with kernel 2.6.10 and it works with Knoppix 3.7+) and I understand that the card is fairly well supported under Linux, so I'm a bit confused. Here are the results of some relevant commands.

v4l-conf:
Code:
v4l-conf: using X11 display :0.0
dga: version 2.0
mode: 1024x768, depth=24, bpp=32, bpl=4096, base=0xe0000000
can't open /dev/video0: No such device
lspci:
Code:
0000:00:00.0 Host bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
0000:00:01.0 PCI bridge: Intel Corp. 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 01)
0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 01)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 81)
0000:00:1f.0 ISA bridge: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) LPC Bridge (rev 01)
0000:00:1f.1 IDE interface: Intel Corp. 82801DB/DBL (ICH4/ICH4-L) UltraATA-100 IDE Controller (rev 01)
0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
0000:02:00.0 Multimedia video controller: Conexant Winfast TV2000 XP (rev 05)
0000:02:00.1 Multimedia controller: Conexant: Unknown device 8811 (rev 05)
0000:02:01.0 Modem: Broadcom Corporation BCM4212 v.90 56k modem (rev 02)
0000:02:02.0 Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
0000:02:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (LOM) Ethernet Controller (rev 81)
xawtv -hwscan
Code:
This is xawtv-3.94, running on Linux/i686 (2.6.11-1-686)
looking for available devices
port 177-177
    type : Xvideo, image scaler
    name : NV17 Video Overlay

port 178-178
    type : Xvideo, image scaler
    name : NV17 Video Texture

port 179-210
    type : Xvideo, image scaler
    name : NV05 Video Blitter

port 211-211                            [ -xvport 211 ]
    type : Xvideo, video overlay
    name : NVIDIA Video Interface Port
On the box that the card came in is says that it is a WinTV-PCI-FM by Hauppauge.

My guess is that the proper module isn't being loaded.

Any ideas?
 
Old 09-12-2005, 08:33 AM   #2
HappyTux
Senior Member
 
Registered: Mar 2003
Location: Nova Scotia, Canada
Distribution: Debian AMD64
Posts: 3,591

Rep: Reputation: 96
I would say you are right or the module is loaded with incorrect options. Can you show us the output of lsmod and the part of the dmesg that looks like the output below from the Knoppix 3.7 or the Debian booted with the 2.6.10 kernel. And how did you update the kernel with apt/aptitude or did you self compile?

Code:
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 17, latency: 32, mmio: 0xed011000
bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606
bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00bf7707 [init]
bttv0: using tuner=2
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:00:09.1[A] -> GSI 17 (level, low) -> IRQ 17
bt878(0): Bt878 (rev 17) at 00:09.1, irq: 17, latency: 32, memory: 0xed010000
 
Old 09-12-2005, 09:06 AM   #3
Optimistic
Member
 
Registered: Jun 2004
Location: Germany
Distribution: Debian (testing)
Posts: 276

Original Poster
Rep: Reputation: 33
I updated my kernel with Synaptic.

I booted into Knoppix 3.7 with the 2.6 kernel and here is what I found:

Knoppix dmesg
Code:
Linux video capture interface: v1.00
cx2388x v4l2 driver version 0.0.4 loaded
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 21 (level, low) -> IRQ 21
cx8800[0]: found at 0000:02:00.0, rev: 5, irq: 21, latency: 64, mmio: 0xfa000000
cx8800[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
cx8800[0]: i2c register ok
cx8800[0]: hauppauge eeprom: model=34519, tuner=PAL_I (-1), radio=yes
tuner: Ignoring new-style parameters in presence of obsolete ones
tuner: chip found at addr 0xc2 i2c-bus cx8800[0]
cx8800[0]: i2c attach [client=(tuner unset)]
cx8800[0]: registered device video0 [v4l2]
cx8800[0]: registered device vbi0
cx8800[0]: registered device radio0
cx8800[0]: set_audio_standard_BTSC (status: known-good)
cx8800[0]: cx88: tvaudio thread started
cx8800[0]: AUD_STATUS: 0x1f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x3f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x772 [mono/no pilot] ctl=BTSC_AUTO_STEREO
Adding 292784k swap on /dev/hda5.  Priority:-1 extents:1
Adding 779144k swap on /dev/hdb3.  Priority:-2 extents:1
NET: Registered protocol family 17
e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
cx8800[0]: AUD_STATUS: 0x9f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0xb32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
cx8800[0]: AUD_STATUS: 0xd72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
mtrr: 0xe0000000,0x10000000 overlaps existing 0xe0000000,0x200000
cx8800[0]: AUD_STATUS: 0xeb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x10f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x12f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x14f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x16b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x1872 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x1b72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x1a32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x1bb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x1db2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x1f72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x1fb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x20f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x2332 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x2472 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x2532 [mono/no pilot] ctl=BTSC_AUTO_STEREO
usb 3-2: new full speed USB device using address 2
uba: device 2 capacity nsec 251904 bsize 512
uba: was not changed
 uba: uba1
cx8800[0]: AUD_STATUS: 0x24f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x26f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
uba: was not changed
uba: was not changed
cx8800[0]: AUD_STATUS: 0x2772 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x2972 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x2bb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x2b32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x2cb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x2d32 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x2fb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x31f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x3372 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x34f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x34f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x3832 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x39b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x3bb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
uba: was not changed
uba: was not changed
cx8800[0]: AUD_STATUS: 0x3bf2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x3c72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x3eb2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x3e72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x41b2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x43f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x4472 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x4632 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x49f2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x4b72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x4df2 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x4f72 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x5072 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x5172 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x5332 [mono/no pilot] ctl=BTSC_AUTO_STEREO
cx8800[0]: AUD_STATUS: 0x5532 [mono/no pilot] ctl=BTSC_AUTO_STEREO
Knoppix lsmod
Code:
Module                  Size  Used by
nls_iso8859_1           7936  1 
nls_cp437               9600  1 
via_agp                11264  0 
sworks_agp             10784  0 
sis_agp                 9732  0 
nvidia_agp              9628  0 
intel_mch_agp          11664  0 
efficeon_agp           10016  0 
ati_agp                10252  0 
amd64_agp              12488  0 
amd_k7_agp              9612  0 
ali_agp                 9088  0 
autofs4                18948  1 
af_packet              19848  0 
tuner                  22436  0 
cx8800                 44188  0 
cx88xx                 21764  1 cx8800
video_buf              20228  2 cx8800,cx88xx
i2c_algo_bit           12424  1 cx8800
v4l1_compat            16516  1 cx8800
v4l2_common             8960  1 cx8800
btcx_risc               7816  2 cx8800,cx88xx
videodev               11264  1 cx8800
i2c_core               22144  4 tuner,cx8800,cx88xx,i2c_algo_bit
i810_audio             36116  0 
ac97_codec             19212  1 i810_audio
soundcore              11104  1 i810_audio
e100                   33792  0 
mii                     7808  1 e100
tulip                  45728  0 
crc32                   8064  1 tulip
mtdcore                 9800  0 
chipreg                 6656  0 
hw_random               8468  0 
intel_agp              21664  1 
agpgart                30380  11 via_agp,sworks_agp,sis_agp,nvidia_agp,intel_mch_agp,efficeon_agp,ati_agp,amd64_agp,amd_k7_agp,ali_agp,intel_agp
parport_pc             38464  0 
parport                35912  1 parport_pc
8250                   37992  0 
serial_core            21504  1 8250
evdev                  11008  0 
joydev                 11840  0 
tsdev                   9536  0 
usbhid                 40512  0 
ds                     17412  0 
yenta_socket           20736  0 
pcmcia_core            58308  2 ds,yenta_socket
thermal                14856  0 
processor              20032  1 thermal
fan                     6916  0 
button                  9104  0 
battery                11908  0 
ac                      7556  0 
rtc                    13768  0 
cloop                  16128  1 
sbp2                   24712  0 
ohci1394               33028  0 
ieee1394              302904  2 sbp2,ohci1394
ub                     17564  2 
usb_storage            61760  0 
ohci_hcd               21508  0 
uhci_hcd               31120  0 
usbcore                99684  7 usbhid,ub,usb_storage,ohci_hcd,uhci_hcd
tmscsim                26560  0 
ide_scsi               17028  1
 
Old 09-12-2005, 09:50 AM   #4
HappyTux
Senior Member
 
Registered: Mar 2003
Location: Nova Scotia, Canada
Distribution: Debian AMD64
Posts: 3,591

Rep: Reputation: 96
Ok try this on the Debian install create a file /etc/modprobe.d/tvcard with this for the contents.

Code:
## Added by me for correct tvcard options
options cx8800 card=1
Then reboot and see if detects the card properly if not can you show us the dmesg part in the Debian install.
 
Old 09-12-2005, 10:07 AM   #5
Optimistic
Member
 
Registered: Jun 2004
Location: Germany
Distribution: Debian (testing)
Posts: 276

Original Poster
Rep: Reputation: 33
Here is the result of dmesg on the Debian install:

Code:
fbff 00000000 00000000 00000080 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 1632k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfbe74, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
pnp: 00:09: ioport range 0x800-0x85f could not be reserved
pnp: 00:09: ioport range 0xc00-0xc7f has been reserved
pnp: 00:09: ioport range 0x860-0x8ff could not be reserved
Simple Boot Flag value 0x87 read from CMOS RAM was invalid
Simple Boot Flag at 0x7a set to 0x1
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 169
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI wakeup devices: 
VBTN PCI0 USB0 USB1 USB2 PCI1  KBD 
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 1632KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 172k freed
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
ICH4: chipset revision 1
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: WDC WD400BB-75DEA0, ATA DISK drive
hdb: WDC WD1600BB-00FTA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: Host Protected Area detected.
	current capacity is 78125000 sectors (40000 MB)
	native  capacity is 78165360 sectors (40020 MB)
hda: Host Protected Area disabled.
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
hdb: max request size: 1024KiB
hdb: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
hdb: cache flushes supported
 /dev/ide/host0/bus0/target1/lun0: p1 p2 p3 p4 < p5 >
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 292784k swap on /dev/hda5.  Priority:-1 extents:1
EXT3 FS on hda1, internal journal
Real Time Clock Driver v1.12
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
Capability LSM initialized
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
ReiserFS: hdb5: found reiserfs format "3.6" with standard journal
ReiserFS: hdb5: using ordered data mode
ReiserFS: hdb5: journal params: device hdb5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hdb5: checking transaction log (hdb5)
ReiserFS: hdb5: Using r5 hash to sort names
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 185
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 185, pci mem 0xfe100800
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49248 usecs
intel8x0: clocking to 48000
Linux Tulip driver version 1.1.13 (May 11, 2002)
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 177
tulip0:  MII transceiver #1 config 1000 status 7849 advertising 01e1.
eth0: ADMtek Comet rev 17 at 0001e800, 00:04:5A:45:41:8C, IRQ 177.
e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI
e100: Copyright(c) 1999-2004 Intel Corporation
ACPI: PCI interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 201
e100: eth1: e100_probe: addr 0xfbefd000, irq 201, MAC addr 00:07:E9:A9:D7:F5
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Maximum main memory to use for agp memory: 321M
agpgart: AGP aperture is 128M @ 0xf0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 209
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 209, io base 0xff80
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 217, io base 0xff60
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 177, io base 0xff40
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-2: new low speed USB device using uhci_hcd and address 3
usb 4-2: new full speed USB device using uhci_hcd and address 2
usbcore: registered new driver hiddev
input: USB HID v1.00 Joystick [Honey Bee AIRFLO] on usb-0000:00:1d.1-1
input: USB HID v1.10 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
hw_random hardware driver 1.0.0 loaded
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
  Vendor: LEXAR     Model: JUMPDRIVE         Rev: 1.20
  Type:   Direct-Access                      ANSI SCSI revision: 01 CCS
usb-storage: device scan complete
SCSI device sda: 251904 512-byte hdwr sectors (129 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
SCSI device sda: 251904 512-byte hdwr sectors (129 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
 /dev/scsi/host0/bus0/target0/lun0: p1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Intel 810 + AC97 Audio, version 1.01, 22:21:10 Jun 20 2005
input: PC Speaker
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
NET: Registered protocol family 17
e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0320820(lo)
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 24
ip_tables: (C) 2000-2002 Netfilter core team
lp0: using parport0 (interrupt-driven).
ip_conntrack version 2.1 (3067 buckets, 24536 max) - 248 bytes per conntrack
eth1: no IPv6 routers present
eth0: no IPv6 routers present
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7174  Tue Mar 22 06:44:39 PST 2005
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Inbound IN=ppp0 OUT= MAC= SRC=84.161.104.96 DST=84.165.238.48 LEN=52 TOS=0x00 PREC=0x00 TTL=124 ID=2458 DF PROTO=TCP SPT=4287 DPT=135 WINDOW=65535 RES=0x00 SYN URGP=0 
Linux video capture interface: v1.00
Inbound IN=ppp0 OUT= MAC= SRC=84.135.95.231 DST=84.165.238.48 LEN=52 TOS=0x00 PREC=0x00 TTL=124 ID=26489 DF PROTO=TCP SPT=3244 DPT=445 WINDOW=8576 RES=0x00 SYN URGP=0 
Inbound IN=ppp0 OUT= MAC= SRC=84.135.95.231 DST=84.165.238.48 LEN=52 TOS=0x00 PREC=0x00 TTL=124 ID=26975 DF PROTO=TCP SPT=3244 DPT=445 WINDOW=8576 RES=0x00 SYN URGP=0 
Inbound IN=ppp0 OUT= MAC= SRC=202.111.173.42 DST=84.165.238.48 LEN=346 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=UDP SPT=32805 DPT=1026 LEN=326 
Inbound IN=ppp0 OUT= MAC= SRC=202.111.173.42 DST=84.165.238.48 LEN=346 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=UDP SPT=32805 DPT=1027 LEN=326 
Inbound IN=ppp0 OUT= MAC= SRC=84.165.235.106 DST=84.165.238.48 LEN=48 TOS=0x00 PREC=0x00 TTL=127 ID=32192 DF PROTO=TCP SPT=1371 DPT=135 WINDOW=16384 RES=0x00 SYN URGP=0 
Inbound IN=ppp0 OUT= MAC= SRC=84.165.235.106 DST=84.165.238.48 LEN=48 TOS=0x00 PREC=0x00 TTL=127 ID=32541 DF PROTO=TCP SPT=1371 DPT=135 WINDOW=16384 RES=0x00 SYN URGP=0 
Inbound IN=ppp0 OUT= MAC= SRC=195.206.31.206 DST=84.165.238.48 LEN=78 TOS=0x00 PREC=0x00 TTL=119 ID=13129 PROTO=UDP SPT=15146 DPT=137 LEN=58 
Inbound IN=ppp0 OUT= MAC= SRC=84.165.73.33 DST=84.165.238.48 LEN=52 TOS=0x00 PREC=0x00 TTL=125 ID=15917 DF PROTO=TCP SPT=3282 DPT=445 WINDOW=32767 RES=0x00 SYN URGP=0 
Inbound IN=ppp0 OUT= MAC= SRC=84.165.73.33 DST=84.165.238.48 LEN=52 TOS=0x00 PREC=0x00 TTL=125 ID=16132 DF PROTO=TCP SPT=3282 DPT=445 WINDOW=32767 RES=0x00 SYN URGP=0 
Inbound IN=ppp0 OUT= MAC= SRC=84.165.151.30 DST=84.165.238.48 LEN=52 TOS=0x00 PREC=0x00 TTL=127 ID=38994 DF PROTO=TCP SPT=1442 DPT=135 WINDOW=32767 RES=0x00 SYN URGP=0 
Inbound IN=ppp0 OUT= MAC= SRC=84.165.198.161 DST=84.165.238.48 LEN=52 TOS=0x00 PREC=0x00 TTL=127 ID=6696 DF PROTO=TCP SPT=3243 DPT=135 WINDOW=32767 RES=0x00 SYN URGP=0 
Inbound IN=ppp0 OUT= MAC= SRC=84.165.198.161 DST=84.165.238.48 LEN=52 TOS=0x00 PREC=0x00 TTL=127 ID=7200 DF PROTO=TCP SPT=3243 DPT=135 WINDOW=32767 RES=0x00 SYN URGP=0 
Inbound IN=ppp0 OUT= MAC= SRC=84.164.39.234 DST=84.165.238.48 LEN=52 TOS=0x00 PREC=0x00 TTL=124 ID=14069 DF PROTO=TCP SPT=2297 DPT=135 WINDOW=65535 RES=0x00 SYN URGP=0 
Inbound IN=ppp0 OUT= MAC= SRC=84.165.200.222 DST=84.165.238.48 LEN=48 TOS=0x00 PREC=0x00 TTL=127 ID=4431 DF PROTO=TCP SPT=1806 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0 
Inbound IN=ppp0 OUT= MAC= SRC=84.165.200.222 DST=84.165.238.48 LEN=48 TOS=0x00 PREC=0x00 TTL=127 ID=5349 DF PROTO=TCP SPT=1806 DPT=445 WINDOW=16384 RES=0x00 SYN URGP=0 
Inbound IN=ppp0 OUT= MAC= SRC=84.165.245.164 DST=84.165.238.48 LEN=48 TOS=0x00 PREC=0x00 TTL=127 ID=31677 DF PROTO=TCP SPT=3780 DPT=135 WINDOW=16384 RES=0x00 SYN URGP=0
Be back soon, gotta go shopping...
 
Old 09-12-2005, 11:52 AM   #6
Optimistic
Member
 
Registered: Jun 2004
Location: Germany
Distribution: Debian (testing)
Posts: 276

Original Poster
Rep: Reputation: 33
So, it looks like I need the cx8800 or cx88xx or cx88 module (perhaps they are the same).

Anyway, on the 2.6.11 kernel I get this:
Code:
find /lib/modules/2.6.11-1-686/ | grep cx
/lib/modules/2.6.11-1-686/kernel/arch/i386/kernel/scx200.ko
/lib/modules/2.6.11-1-686/kernel/drivers/char/scx200_gpio.ko
/lib/modules/2.6.11-1-686/kernel/drivers/char/watchdog/scx200_wdt.ko
/lib/modules/2.6.11-1-686/kernel/drivers/i2c/busses/scx200_acb.ko
/lib/modules/2.6.11-1-686/kernel/drivers/i2c/busses/scx200_i2c.ko
/lib/modules/2.6.11-1-686/kernel/drivers/ide/pci/via82cxxx.ko
/lib/modules/2.6.11-1-686/kernel/drivers/media/dvb/frontends/cx22700.ko
/lib/modules/2.6.11-1-686/kernel/drivers/media/dvb/frontends/cx22702.ko
/lib/modules/2.6.11-1-686/kernel/drivers/media/dvb/frontends/cx24110.ko
/lib/modules/2.6.11-1-686/kernel/drivers/media/video/btcx-risc.ko
/lib/modules/2.6.11-1-686/kernel/drivers/mtd/maps/scx200_docflash.ko
/lib/modules/2.6.11-1-686/kernel/drivers/net/wan/cycx_drv.ko
/lib/modules/2.6.11-1-686/kernel/sound/oss/via82cxxx_audio.ko
BUT, on the 2.6.10 kernel I get:

Code:
:find /lib/modules/2.6.10-custom/ | grep cx
/lib/modules/2.6.10-custom/kernel/arch/i386/kernel/scx200.ko
/lib/modules/2.6.10-custom/kernel/drivers/char/scx200_gpio.ko
/lib/modules/2.6.10-custom/kernel/drivers/char/watchdog/scx200_wdt.ko
/lib/modules/2.6.10-custom/kernel/drivers/i2c/busses/scx200_acb.ko
/lib/modules/2.6.10-custom/kernel/drivers/i2c/busses/scx200_i2c.ko
/lib/modules/2.6.10-custom/kernel/drivers/ide/pci/via82cxxx.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/dvb/frontends/cx22700.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/dvb/frontends/cx22702.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/dvb/frontends/cx24110.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/video/btcx-risc.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/video/cx88
/lib/modules/2.6.10-custom/kernel/drivers/media/video/cx88/cx88-blackbird.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/video/cx88/cx8800.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/video/cx88/cx8802.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/video/cx88/cx88xx.ko
/lib/modules/2.6.10-custom/kernel/drivers/mtd/maps/scx200_docflash.ko
/lib/modules/2.6.10-custom/kernel/drivers/net/wan/cycx_drv.ko
/lib/modules/2.6.10-custom/kernel/sound/oss/via82cxxx_audio.ko
So, it looks like the 2.6.11 kernel is missing the required module. Is there anyway to get it in there without rolling my own kernel? I don't feel like going through all the Nvidia troubles again (it took a while to get direct rendering to work properly so I could play Doom3).
 
Old 09-12-2005, 12:27 PM   #7
HappyTux
Senior Member
 
Registered: Mar 2003
Location: Nova Scotia, Canada
Distribution: Debian AMD64
Posts: 3,591

Rep: Reputation: 96
Quote:
Originally posted by Optimistic
So, it looks like I need the cx8800 or cx88xx or cx88 module (perhaps they are the same).

Anyway, on the 2.6.11 kernel I get this:
Code:
find /lib/modules/2.6.11-1-686/ | grep cx
/lib/modules/2.6.11-1-686/kernel/arch/i386/kernel/scx200.ko
/lib/modules/2.6.11-1-686/kernel/drivers/char/scx200_gpio.ko
/lib/modules/2.6.11-1-686/kernel/drivers/char/watchdog/scx200_wdt.ko
/lib/modules/2.6.11-1-686/kernel/drivers/i2c/busses/scx200_acb.ko
/lib/modules/2.6.11-1-686/kernel/drivers/i2c/busses/scx200_i2c.ko
/lib/modules/2.6.11-1-686/kernel/drivers/ide/pci/via82cxxx.ko
/lib/modules/2.6.11-1-686/kernel/drivers/media/dvb/frontends/cx22700.ko
/lib/modules/2.6.11-1-686/kernel/drivers/media/dvb/frontends/cx22702.ko
/lib/modules/2.6.11-1-686/kernel/drivers/media/dvb/frontends/cx24110.ko
/lib/modules/2.6.11-1-686/kernel/drivers/media/video/btcx-risc.ko
/lib/modules/2.6.11-1-686/kernel/drivers/mtd/maps/scx200_docflash.ko
/lib/modules/2.6.11-1-686/kernel/drivers/net/wan/cycx_drv.ko
/lib/modules/2.6.11-1-686/kernel/sound/oss/via82cxxx_audio.ko
BUT, on the 2.6.10 kernel I get:

Code:
:find /lib/modules/2.6.10-custom/ | grep cx
/lib/modules/2.6.10-custom/kernel/arch/i386/kernel/scx200.ko
/lib/modules/2.6.10-custom/kernel/drivers/char/scx200_gpio.ko
/lib/modules/2.6.10-custom/kernel/drivers/char/watchdog/scx200_wdt.ko
/lib/modules/2.6.10-custom/kernel/drivers/i2c/busses/scx200_acb.ko
/lib/modules/2.6.10-custom/kernel/drivers/i2c/busses/scx200_i2c.ko
/lib/modules/2.6.10-custom/kernel/drivers/ide/pci/via82cxxx.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/dvb/frontends/cx22700.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/dvb/frontends/cx22702.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/dvb/frontends/cx24110.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/video/btcx-risc.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/video/cx88
/lib/modules/2.6.10-custom/kernel/drivers/media/video/cx88/cx88-blackbird.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/video/cx88/cx8800.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/video/cx88/cx8802.ko
/lib/modules/2.6.10-custom/kernel/drivers/media/video/cx88/cx88xx.ko
/lib/modules/2.6.10-custom/kernel/drivers/mtd/maps/scx200_docflash.ko
/lib/modules/2.6.10-custom/kernel/drivers/net/wan/cycx_drv.ko
/lib/modules/2.6.10-custom/kernel/sound/oss/via82cxxx_audio.ko
So, it looks like the 2.6.11 kernel is missing the required module. Is there anyway to get it in there without rolling my own kernel? I don't feel like going through all the Nvidia troubles again (it took a while to get direct rendering to work properly so I could play Doom3).
That is certainly a useless kernel I don't see why they would leave out the modules like that don't make sense at all. I would say you are looking at compiling a new kernel for yourself it is not that hard a thing to do here is a guide to doing it. What was the problems you had with the Nvidia driver anyways that made you upgrade the kernel?
 
Old 09-12-2005, 03:11 PM   #8
Optimistic
Member
 
Registered: Jun 2004
Location: Germany
Distribution: Debian (testing)
Posts: 276

Original Poster
Rep: Reputation: 33
Thanks for all the help Happy Tux--I guess I'll just get a different kernel.

I don't know what was causing the trouble with the NVidia drivers before. They would install and work but when I would do a glxinfo it would say that direct rendering was not working. I followed this guide and they worked after that.

http://home.comcast.net/~andrex/Debi...tallation.html
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
WLAN Card problems... Aval0n12 Linux - Hardware 2 02-14-2005 02:47 AM
Video Card problems Mr.Kex Linux - Software 4 02-23-2004 02:41 PM
tv card reception problems (in the UK) salparadise Linux - Hardware 0 12-11-2003 12:03 PM
Network card, and other problems... Rivitir Debian 6 10-16-2003 08:49 AM
Network Card Problems pnesbitt Linux - Networking 1 09-21-2003 09:49 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 07:12 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration