I need some help to configure my modem, i've downloaded the scanmodem and here is the ModemData.txt:
DO use the following line as the email Subject Line, to alert cogent experts:
scanModem,
Welcome to SUSE LINUX 10.0 (i586) - Kernel kernel 2.6.13-15-default
Occassionally reponses are blocked by an Internet Provider mail filters.
So do in a day also check the Archived responses at
DISCUSS@linmodems.org
Code updated on: 2006_March_01
------------ -------------- System information ------------------------
Welcome to SUSE LINUX 10.0 (i586) - Kernel
on System with processor: i686
currently under kernel: 2.6.13-15-default
Be sure to read the Ethernet section of Modem/YourModem.txt
A /dev/modem symbolic link is not present
USB modem not detected.
The kernel was assembled with compiler: 4.0.2
with current System compiler GCC=4.0.2
Found make utility.
Checking for kernel-headers needed for compiling.
Kernel-headers supporting compiling are resident:
Modem candidates are at PCI_buses: 00:1f.6
Providing detail for device at 00:1f.6
with vendor-ID:device-ID
----:----
Class 0703: 8086:24c6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
SubSystem 1179:0001 Toshiba America Info Systems: Unknown device 0001
Flags: medium devsel, IRQ 11
Checking for IRQ 11 sharing with modem.
XT-PIC ehci_hcd:usb1, yenta, Intel 82801DB-ICH4, eth0
-----PCI_IDs------- --CompilerVer-
Feature List: Primary Subsystem Distr KernelVer kernel default CPU
./scanModem test 8086:24c6 1179:0001 SuSE 2.6.13-15-default 4.0.2 4.0.2 i686
From records, 1179:0001 has soft modem codec type SIL27
The following two Root commands should set up the modem.
modprobe snd-intel8x0m
slmodemd --alsa -c YOUR_COUNTRY modem:1
Get the SLMODEMD.gcc4.tar.gz from
http://linmodems.technion.ac.il/packages/smartlink/
The controller: 8086:24c6 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)1DB ICH4
is capable of supporting soft modem chips from AT LEAST manufacturers:
Broadcom
AgereSystems
Conexant
Intel
Smartlink
The Subsystem PCI id does not itself identify the modem Codec.
Checking for autoloaded ALSA modem drivers
Driver snd-intel8x0m may enable codec acquisition
I've already downloaded the file listed up but I don't know what to do with it.
Any help will be aprecciated!!
