suse 9.1 added secondary HD /w win98 wont boot
i loaded suse 9.0 pro with a dvd, upgraded to 9.1 via ftp, updated all patches. i then added a second hard (win98) drive which suse recognizes.
then i went to yast>boot loaded config i asked for a new proposal and thw windows hard drive was found i now have linux, windows, floppy, failsafe, memorytest ( i didnt have windows before the previous step) i even went into yast and added the mount point /windows/c to the new HD when i try to access windows, i get a blank screen with the following: root (hd1,0) Filesystem type is fat, partition type 0xc chainloader +1 with a blinking cursor i have another box that had win2k first then o loaded suse the exact same procedure i mentioned earlier, and windows works. i check the boot loader config on that box, and everything looks the same as the first box. can i add a windows hard drive after suse 9.x has been loaded the only thing i can think of is that the win98 HD was once on its own and it has its own bootup instructions or MBR |
You want to be able to boot 98 right?
I assume that grub is your bootloader? |
Yes, i want to be able to use GRUB and select either linux (suse 9.1) or windows (windows98 or other win OS)
|
|
to brundle-fly
let me know if get it to work. I have the same problem - my second drive OS (Win XP) will boot from GRUB. I can boot it only if I go to BIOS and change the drive boot order (so it checks the drive with XP first). |
the instructions i see here seem like i have to start from scrath. i have my suse 9.1 just the way i like it, and i want to bring win98 into the picture which eventually i will upgrade to xp home. The only wayi know how to make this work is by installing winxp first on the 20gb drive, then re-load suse 9.1 on the second 40gb drive. Suse will recognize the windows drive and added into grub automaticlly. Of caourse thats my last resort.
im going to try to edit the boot loader simialar to the instructions, but if that doesnt work, ill go to plan B. i let you know if it works Thanx for the info |
Windows should always be installed first to avoid any MBR conflicts between win and lin. even with 98 or xp
|
It is easier installing linux after windows but not really a problem. You just have to remember that windows will overwrite the MBR.
With window on the second you need to add the following to the grub configuration file for the windows entry. map (hd0) (hd1) map (hd1) (hd0) |
yeah, the thing is that suse was loaded first and windows was already loaded on the second hard drive, so all suse kknew about the new hard drive was that its a FAT partition. The MBR stayed the same on the first hard drive and the second hard drive already had win98. Will the grub map entries still work?
|
|
thankx all, time is of the essence so i have to load xp first then suse 9.1, i know that will work for sure.
|
No problem, and remember, HAVE FUN! ;)
|
All times are GMT -5. The time now is 10:42 PM. |