Sound problem
I am newbie with Linux.
I have HP Vectra VL-600 computer. I have installed Suse Linux 10.1. Amarok plays mp3 fiels and RealPlayer plays .ram files. Kmix loads .mid files and starts to play but there is no sound. And Krecord starts to record but it does not save any data on files. Is the problem with hardware or are there some rpm-packages missing? Does anyone know all the packages which are needed for audio recording and playing MIDI? I can hear my voice from speakers so the microphone system is working.
Here is hardware information attached:
21: PCI 06.0: 0401 Multimedia audio controller
[Created at pci.300]
UDI: /org/freedesktop/Hal/devices/pci_1013_6003
Unique ID: H0_h.bPM+sbjw7xD
SysFS ID: /devices/pci0000:00/0000:00:06.0
SysFS BusID: 0000:00:06.0
Hardware Class: sound
Model: "Cirrus Logic Crystal SoundFusion PCI Audio Accelerator"
Vendor: pci 0x1013 "Cirrus Logic"
Device: pci 0x6003 "CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator]"
SubVendor: pci 0x1013 "Cirrus Logic"
SubDevice: pci 0x4280 "Crystal SoundFusion PCI Audio Accelerator"
Revision: 0x01
Driver: "Sound Fusion CS46xx"
Memory Range: 0xf4100000-0xf4100fff (rw,non-prefetchable)
Memory Range: 0xf4000000-0xf40fffff (rw,non-prefetchable)
IRQ: 10 (89854 events)
Module Alias: "pci:v00001013d00006003sv00001013sd00004280bc04sc01i00"
Driver Info #0:
Driver Status: snd_cs46xx is active
Driver Activation Cmd: "modprobe snd_cs46xx"
Config Status: cfg=yes, avail=yes, need=no, active=unknown
|
