LinuxQuestions.org
Share your knowledge at the LQ Wiki.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
LinkBack Search this Thread
Old 01-06-2013, 03:47 AM   #1
kn0w-
Member
 
Registered: May 2012
Posts: 47

Rep: Reputation: Disabled
Exclamation slackware - activate 3 monitors. card AMD ATI 5830HD


need so helping.
my ATI Radeom. 5830DH has support for 3 monitors.
2 DVI
1 HDMI
1 DisplayPort
=============================================
Gotta leave, working the 2 DVI and HDMI, [
when I install Slackware normally. They run the 3 monitors, correctly. the DVI and HDMI. when I install. Driver. ATI WHATEVER version. the system passes. accept only 2, no matter what, when both DVI HDMI, I can choose, but Fuinciona Only 2 .....


Because before installing the driver. Functioned the 3?
instaleio after software has a locking 3!
ha some, metododo to achieve, the third release. ?
without losing the installation of the ATI driver.!
or I'll have to recorer the default installation of Slackware without the driver board!

graphics ati-radeon-hd--5830

If someone can help.
ficrei grateful

Last edited by kn0w-; 01-07-2013 at 03:45 AM.
 
Old 01-07-2013, 05:31 PM   #2
Alchemikos
Member
 
Registered: Jun 2012
Location: Porto Alegre-Brazil
Distribution: Slackware- 14, Debian 6.06
Posts: 88

Rep: Reputation: 6
I think thats it is a drive/module bug
Post your :
Code:
# lspci -v
 
Old 01-08-2013, 06:38 PM   #3
kn0w-
Member
 
Registered: May 2012
Posts: 47

Original Poster
Rep: Reputation: Disabled
Lightbulb

Quote:
Originally Posted by Alchemikos View Post
I think thats it is a drive/module bug
Post your :
Code:
# lspci -v
ready.
this was the return.
data are within the text file


Code:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
        Subsystem: Giga-byte Technology Device 5000
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: fb800000-fb8fffff
        Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
        Capabilities: [88] Subsystem: Giga-byte Technology Device 5001
        Capabilities: [80] Power Management version 3
        Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [a0] Express Root Port (Slot+), MSI 00
        Capabilities: [100] Virtual Channel
        Kernel driver in use: pcieport

00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
        Subsystem: Giga-byte Technology Device 5006
        Flags: bus master, medium devsel, latency 0, IRQ 18
        Memory at fbfff000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
        Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
        Subsystem: Giga-byte Technology Device a102
        Flags: bus master, fast devsel, latency 0, IRQ 22
        Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+                                           
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00                                  
        Capabilities: [100] Virtual Channel                                                                  
        Capabilities: [130] Root Complex Link                                                                
        Kernel driver in use: snd_hda_intel                                                                  
                                                                                                             
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])                                                                                          
        Flags: bus master, fast devsel, latency 0                                                            
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0                                         
        I/O behind bridge: 0000e000-0000efff                                                                 
        Memory behind bridge: fb600000-fb6fffff                                                              
        Prefetchable memory behind bridge: 00000000fbe00000-00000000fbefffff                                 
        Capabilities: [40] Express Root Port (Slot+), MSI 00                                                 
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-                                           
        Capabilities: [90] Subsystem: Giga-byte Technology Device 5001
        Capabilities: [a0] Power Management version 2
        Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fbd00000-fbdfffff
        Prefetchable memory behind bridge: 00000000fbc00000-00000000fbcfffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Giga-byte Technology Device 5001
        Capabilities: [a0] Power Management version 2
        Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: fbb00000-fbbfffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Giga-byte Technology Device 5001
        Capabilities: [a0] Power Management version 2
        Kernel driver in use: pcieport

00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: fba00000-fbafffff
        Prefetchable memory behind bridge: 00000000bfe00000-00000000bfffffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Giga-byte Technology Device 5001
        Capabilities: [a0] Power Management version 2
        Kernel driver in use: pcieport

00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 05) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: fb900000-fb9fffff
        Prefetchable memory behind bridge: 00000000bfc00000-00000000bfdfffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Giga-byte Technology Device 5001
        Capabilities: [a0] Power Management version 2
        Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
        Subsystem: Giga-byte Technology Device 5006
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at fbffe000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
        Memory behind bridge: fb700000-fb7fffff
        Capabilities: [50] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard

00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 05)
        Subsystem: Giga-byte Technology Device 5001
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information: Len=10 <?>

00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Giga-byte Technology Device b002
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
        I/O ports at ff00 [size=8]
        I/O ports at fe00 [size=4]
        I/O ports at fd00 [size=8]
        I/O ports at fc00 [size=4]
        I/O ports at fb00 [size=16]
        I/O ports at fa00 [size=16]
        Capabilities: [70] Power Management version 3
        Capabilities: [b0] PCI Advanced Features
        Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
        Subsystem: Giga-byte Technology Device 5001
        Flags: medium devsel, IRQ 18
        Memory at fbffd000 (64-bit, non-prefetchable) [size=256]
        I/O ports at 0500 [size=32]
        Kernel driver in use: i801_smbus

00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO])
        Subsystem: Giga-byte Technology Device b002
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
        I/O ports at f800 [size=8]
        I/O ports at f700 [size=4]
        I/O ports at f600 [size=8]
        I/O ports at f500 [size=4]
        I/O ports at f400 [size=16]
        I/O ports at f300 [size=16]
        Capabilities: [70] Power Management version 3
        Capabilities: [b0] PCI Advanced Features
        Kernel driver in use: ata_piix

01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cypress LE [Radeon HD 5800 Series] (prog-if 00 [VGA controller])
        Subsystem: XFX Pine Group Inc. Device 3070
        Flags: bus master, fast devsel, latency 0, IRQ 44
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Memory at fb8c0000 (64-bit, non-prefetchable) [size=128K]
        I/O ports at 9e00 [size=256]
        [virtual] Expansion ROM at fb800000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 3
        Capabilities: [58] Express Legacy Endpoint, MSI 00
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
        Capabilities: [150] Advanced Error Reporting
        Kernel driver in use: fglrx_pci

01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cypress HDMI Audio [Radeon HD 5800 Series]
        Subsystem: XFX Pine Group Inc. Device aa50
        Flags: bus master, fast devsel, latency 0, IRQ 43
        Memory at fb8fc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 3
        Capabilities: [58] Express Legacy Endpoint, MSI 00
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
        Capabilities: [150] Advanced Error Reporting
        Kernel driver in use: snd_hda_intel

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 41
        I/O ports at ee00 [size=256]
        Memory at fbeff000 (64-bit, prefetchable) [size=4K]
        Memory at fbef8000 (64-bit, prefetchable) [size=16K]
        [virtual] Expansion ROM at fbe00000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [70] Express Endpoint, MSI 01
        Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
        Capabilities: [cc] Vital Product Data
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Virtual Channel
        Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00
        Kernel driver in use: r8169

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 42
        I/O ports at de00 [size=256]
        Memory at fbcff000 (64-bit, prefetchable) [size=4K]
        Memory at fbcf8000 (64-bit, prefetchable) [size=16K]
        [virtual] Expansion ROM at fbc00000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [70] Express Endpoint, MSI 01
        Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
        Capabilities: [cc] Vital Product Data
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Virtual Channel
        Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00
        Kernel driver in use: r8169

04:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 18
        Memory at fbbfe000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [68] Power Management version 2
        Capabilities: [50] Express Legacy Endpoint, MSI 01
        Kernel driver in use: ahci

04:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 19
        I/O ports at cf00 [size=8]
        I/O ports at ce00 [size=4]
        I/O ports at cd00 [size=8]
        I/O ports at cc00 [size=4]
        I/O ports at cb00 [size=16]
        Capabilities: [68] Power Management version 2
        Kernel driver in use: pata_jmicron

05:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 19
        Memory at fbafe000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [68] Power Management version 2
        Capabilities: [50] Express Legacy Endpoint, MSI 01
        Kernel driver in use: ahci

05:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 85 [Master SecO PriO])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 16
        I/O ports at bf00 [size=8]
        I/O ports at be00 [size=4]
        I/O ports at bd00 [size=8]
        I/O ports at bc00 [size=4]
        I/O ports at bb00 [size=16]
        Capabilities: [68] Power Management version 2
        Kernel driver in use: pata_jmicron

06:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 18
        Memory at fb9fe000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [68] Power Management version 2
        Capabilities: [50] Express Legacy Endpoint, MSI 01
        Kernel driver in use: ahci

06:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 85 [Master SecO PriO])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 19
        I/O ports at af00 [size=8]
        I/O ports at ae00 [size=4]
        I/O ports at ad00 [size=8]
        I/O ports at ac00 [size=4]
        I/O ports at ab00 [size=16]
        Capabilities: [68] Power Management version 2
        Kernel driver in use: pata_jmicron

07:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, medium devsel, latency 32, IRQ 17
        Memory at fb7ff000 (32-bit, non-prefetchable) [size=2K]
        Memory at fb7f8000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: firewire_ohci
 
Old 01-09-2013, 03:52 PM   #4
Alchemikos
Member
 
Registered: Jun 2012
Location: Porto Alegre-Brazil
Distribution: Slackware- 14, Debian 6.06
Posts: 88

Rep: Reputation: 6
Yeah, If you want that propietary driver you must start with some tries.

1)Try find some setting ...

Code:
# amdcccle
-"Display Manager" > selected "Multi-display desktop with diplays(s)".
-And reboot

2) Reboot backing in textmode (run level 3) and as root:

Code:
aticonfig --initial
Then
Code:
startx


3) Try other official driver maybe you installed the wrong one...

There's 2 drivers in AMD


4)Search for xorg.conf files as examples and compare with the your.

5) Here there a lot od usefull information:
https://wiki.archlinux.org/index.php/AMD_Catalyst

6) See if the 'randeon' module is blacklisted because it conflicts with fglrx

Good Luck
 
1 members found this post helpful.
Old 01-10-2013, 03:06 PM   #5
kn0w-
Member
 
Registered: May 2012
Posts: 47

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by Alchemikos View Post
Yeah, If you want that propietary driver you must start with some tries.

1)Try find some setting ...

Code:
# amdcccle
-"Display Manager" > selected "Multi-display desktop with diplays(s)".
-And reboot

2) Reboot backing in textmode (run level 3) and as root:

Code:
aticonfig --initial
Then
Code:
startx


3) Try other official driver maybe you installed the wrong one...

There's 2 drivers in AMD


4)Search for xorg.conf files as examples and compare with the your.

5) Here there a lot od usefull information:
https://wiki.archlinux.org/index.php/AMD_Catalyst

6) See if the 'randeon' module is blacklisted because it conflicts with fglrx

Good Luck
look at the result.;
when active the 3
monitors.

before. without the driver.; AMD ATI>
the default mode slackware. when installed.
he worked. the three monitors.
and now it is giving this error.
after I installed the driver. ATI>



Code:
The current settings cannot be applied.  Possible issues may include:
  - Display(s) cannot be enabled.
  - Setting(s) cannot be applied due to insufficient video memory.
 
Old 01-10-2013, 05:40 PM   #6
Alchemikos
Member
 
Registered: Jun 2012
Location: Porto Alegre-Brazil
Distribution: Slackware- 14, Debian 6.06
Posts: 88

Rep: Reputation: 6
About the message, it looks like a clock issue.

The most of cards have two clocks, DVI and HDMI need one clock each. So for a third monitor you miss one clock more, and there's no.
I think alone here, and I guess that proprietary module doesn't overthread the card as generic does. I'm supposing because i don't know nothing about the subject, yet.

But the Displayport doesn't need clock just an active adapter to convert the signal from Displayport to DVI.
AMD's FAQ : What are the basic requirements for connecting multiple displays?

If you need your 3D aceleration from the proprietary module, you will need an adaptor, and
here a official AMD's list

I saw an adaptor in Amazon for ≅ US$ 35.

Someone agree?
 
Old 01-10-2013, 09:00 PM   #7
kn0w-
Member
 
Registered: May 2012
Posts: 47

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by Alchemikos View Post
About the message, it looks like a clock issue.

The most of cards have two clocks, DVI and HDMI need one clock each. So for a third monitor you miss one clock more, and there's no.
I think alone here, and I guess that proprietary module doesn't overthread the card as generic does. I'm supposing because i don't know nothing about the subject, yet.

But the Displayport doesn't need clock just an active adapter to convert the signal from Displayport to DVI.
AMD's FAQ : What are the basic requirements for connecting multiple displays?

If you need your 3D aceleration from the proprietary module, you will need an adaptor, and
here a official AMD's list

I saw an adaptor in Amazon for ≅ US$ 35.

Someone agree?

depends;
$ 35
'd be here.
$ 35 x2.38 Quote: = R + $ 83.00 Shipping = $ 120 203.00 (cost me an adapter. Herein. In Brazil. Difficult and, adiquirir.) Many taxes. more expensive, the market.

need a solution to unlock my monitor.
before installing the driver, the ATI_Radeon. the pattern of the 3 areas worked , monitors.
because it worked before, and now I can!
have any solution.? If anyone knows.
 
Old 01-11-2013, 06:58 PM   #8
Alchemikos
Member
 
Registered: Jun 2012
Location: Porto Alegre-Brazil
Distribution: Slackware- 14, Debian 6.06
Posts: 88

Rep: Reputation: 6
Quote:
Originally Posted by kn0w- View Post

depends;
$ 35
'd be here.
$ 35 x2.38 Quote: = R + $ 83.00 Shipping = $ 120 203.00 (cost me an adapter. Herein. In Brazil. Difficult and, adiquirir.) Many taxes. more expensive, the market.

need a solution to unlock my monitor.
before installing the driver, the ATI_Radeon. the pattern of the 3 areas worked , monitors.
because it worked before, and now I can!
have any solution.? If anyone knows.



I don't sure if the 3 monitors with fglrx module works because I use nvidea and just 2 screens, i researched troubles like yours and found exactly the same in Ubuntu, Debian, or anyother Linux that using the fglrx module shows this trouble, just 2 screens at same time, the third screen dead.

As I sent you the link in AMD site that explains it, you have a decision to take, an adapter DP to hdmi, or generic module/drive. The one that worked in your fresh install.


I know that there's no shades or 3D stuffs....

I'm Brazilian too, and I found at mercado livre an adaptor, really, you have hundreds options to choose, I found a good for R$ 40, in Reais and free shiping

I hope you find a solution, and please post here!

Good Luck
 
Old 01-11-2013, 07:47 PM   #9
Alchemikos
Member
 
Registered: Jun 2012
Location: Porto Alegre-Brazil
Distribution: Slackware- 14, Debian 6.06
Posts: 88

Rep: Reputation: 6
I found it..

http://www.linuxquestions.org/questi...in-x11-402003/


Maybe some detail could put the things to work, or to give an insight
Cheers

Last edited by Alchemikos; 01-11-2013 at 07:48 PM. Reason: lack of link
 
Old 01-12-2013, 10:50 AM   #10
kn0w-
Member
 
Registered: May 2012
Posts: 47

Original Poster
Rep: Reputation: Disabled
Quote:
Originally Posted by Alchemikos View Post
I found it..

http://www.linuxquestions.org/questi...in-x11-402003/


Maybe some detail could put the things to work, or to give an insight
Cheers
Opa Que bom kk.
pow vou dar uma estudada. se conseguir posto aqui a solução.
eu tentei muito mas dava sempre erros e nos melhores dos casos funcionou, mas os videos ficaram destorcidos. quando istall, o slackware. por padrão o driver. ele funciona os mas tem programas que precisam de alguns dados da placa, para melhor, processarem alguma coisa. e nisto só consigo. instalando o driver. e ai perco 1 monitor.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I configure dual monitors with ATI 4870 on Slackware 14? reguser23 Slackware 2 11-19-2012 02:41 AM
SUSE ATI Video Card, Monitors go blank for X-Windows PLEASE HELP Drigo Linux - Hardware 2 02-12-2010 09:21 AM
3-monitors using ATI Radeon 2600 Video Card? starsprout Linux - Hardware 6 01-21-2010 11:30 AM
how to setup dual monitors with big desktop on ati card rizwanrafique Linux - Desktop 7 12-24-2008 09:22 AM
Duel Monitors on an ATI card Aman9090 Linux - Hardware 1 01-06-2004 07:06 PM


All times are GMT -5. The time now is 06:39 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration