LinuxQuestions.org

LinuxQuestions.org (http://www.linuxquestions.org/questions/index.php)
-   Linux - Hardware (http://www.linuxquestions.org/questions/forumdisplay.php?f=18)
-   -   slackware - activate 3 monitors. card AMD ATI 5830HD (http://www.linuxquestions.org/questions/showthread.php?t=4175444344)

kn0w- 01-06-2013 03:47 AM

slackware - activate 3 monitors. card AMD ATI 5830HD
 
need so helping.
my ATI Radeom. 5830DH has support for 3 monitors.
2 DVI
1 HDMI
1 DisplayPort
=============================================
Gotta leave, working the 2 DVI and HDMI, [
when I install Slackware normally. They run the 3 monitors, correctly. the DVI and HDMI. when I install. Driver. ATI WHATEVER version. the system passes. accept only 2, no matter what, when both DVI HDMI, I can choose, but Fuinciona Only 2 .....


Because before installing the driver. Functioned the 3?
instaleio after software has a locking 3!
ha some, metododo to achieve, the third release. ?
without losing the installation of the ATI driver.!
or I'll have to recorer the default installation of Slackware without the driver board!

graphics ati-radeon-hd--5830

If someone can help.
ficrei grateful

Alchemikos 01-07-2013 05:31 PM

I think thats it is a drive/module bug
Post your :
Code:

# lspci -v
:)

kn0w- 01-08-2013 06:38 PM

Quote:

Originally Posted by Alchemikos (Post 4864971)
I think thats it is a drive/module bug
Post your :
Code:

# lspci -v
:)

ready.
this was the return.
data are within the text file


Code:

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
        Subsystem: Giga-byte Technology Device 5000
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: fb800000-fb8fffff
        Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
        Capabilities: [88] Subsystem: Giga-byte Technology Device 5001
        Capabilities: [80] Power Management version 3
        Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [a0] Express Root Port (Slot+), MSI 00
        Capabilities: [100] Virtual Channel
        Kernel driver in use: pcieport

00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
        Subsystem: Giga-byte Technology Device 5006
        Flags: bus master, medium devsel, latency 0, IRQ 18
        Memory at fbfff000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
        Kernel driver in use: ehci_hcd

00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
        Subsystem: Giga-byte Technology Device a102
        Flags: bus master, fast devsel, latency 0, IRQ 22
        Memory at fbff8000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+                                         
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00                                 
        Capabilities: [100] Virtual Channel                                                                 
        Capabilities: [130] Root Complex Link                                                               
        Kernel driver in use: snd_hda_intel                                                                 
                                                                                                           
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])                                                                                         
        Flags: bus master, fast devsel, latency 0                                                           
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0                                       
        I/O behind bridge: 0000e000-0000efff                                                               
        Memory behind bridge: fb600000-fb6fffff                                                             
        Prefetchable memory behind bridge: 00000000fbe00000-00000000fbefffff                               
        Capabilities: [40] Express Root Port (Slot+), MSI 00                                               
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-                                         
        Capabilities: [90] Subsystem: Giga-byte Technology Device 5001
        Capabilities: [a0] Power Management version 2
        Kernel driver in use: pcieport

00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fbd00000-fbdfffff
        Prefetchable memory behind bridge: 00000000fbc00000-00000000fbcfffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Giga-byte Technology Device 5001
        Capabilities: [a0] Power Management version 2
        Kernel driver in use: pcieport

00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: fbb00000-fbbfffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Giga-byte Technology Device 5001
        Capabilities: [a0] Power Management version 2
        Kernel driver in use: pcieport

00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: fba00000-fbafffff
        Prefetchable memory behind bridge: 00000000bfe00000-00000000bfffffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Giga-byte Technology Device 5001
        Capabilities: [a0] Power Management version 2
        Kernel driver in use: pcieport

00:1c.6 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 (rev 05) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: fb900000-fb9fffff
        Prefetchable memory behind bridge: 00000000bfc00000-00000000bfdfffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Giga-byte Technology Device 5001
        Capabilities: [a0] Power Management version 2
        Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
        Subsystem: Giga-byte Technology Device 5006
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at fbffe000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
        Memory behind bridge: fb700000-fb7fffff
        Capabilities: [50] Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard

00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 05)
        Subsystem: Giga-byte Technology Device 5001
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information: Len=10 <?>

00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Giga-byte Technology Device b002
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
        I/O ports at ff00 [size=8]
        I/O ports at fe00 [size=4]
        I/O ports at fd00 [size=8]
        I/O ports at fc00 [size=4]
        I/O ports at fb00 [size=16]
        I/O ports at fa00 [size=16]
        Capabilities: [70] Power Management version 3
        Capabilities: [b0] PCI Advanced Features
        Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
        Subsystem: Giga-byte Technology Device 5001
        Flags: medium devsel, IRQ 18
        Memory at fbffd000 (64-bit, non-prefetchable) [size=256]
        I/O ports at 0500 [size=32]
        Kernel driver in use: i801_smbus

00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO])
        Subsystem: Giga-byte Technology Device b002
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
        I/O ports at f800 [size=8]
        I/O ports at f700 [size=4]
        I/O ports at f600 [size=8]
        I/O ports at f500 [size=4]
        I/O ports at f400 [size=16]
        I/O ports at f300 [size=16]
        Capabilities: [70] Power Management version 3
        Capabilities: [b0] PCI Advanced Features
        Kernel driver in use: ata_piix

01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cypress LE [Radeon HD 5800 Series] (prog-if 00 [VGA controller])
        Subsystem: XFX Pine Group Inc. Device 3070
        Flags: bus master, fast devsel, latency 0, IRQ 44
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Memory at fb8c0000 (64-bit, non-prefetchable) [size=128K]
        I/O ports at 9e00 [size=256]
        [virtual] Expansion ROM at fb800000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 3
        Capabilities: [58] Express Legacy Endpoint, MSI 00
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
        Capabilities: [150] Advanced Error Reporting
        Kernel driver in use: fglrx_pci

01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cypress HDMI Audio [Radeon HD 5800 Series]
        Subsystem: XFX Pine Group Inc. Device aa50
        Flags: bus master, fast devsel, latency 0, IRQ 43
        Memory at fb8fc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 3
        Capabilities: [58] Express Legacy Endpoint, MSI 00
        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
        Capabilities: [150] Advanced Error Reporting
        Kernel driver in use: snd_hda_intel

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 41
        I/O ports at ee00 [size=256]
        Memory at fbeff000 (64-bit, prefetchable) [size=4K]
        Memory at fbef8000 (64-bit, prefetchable) [size=16K]
        [virtual] Expansion ROM at fbe00000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [70] Express Endpoint, MSI 01
        Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
        Capabilities: [cc] Vital Product Data
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Virtual Channel
        Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00
        Kernel driver in use: r8169

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 42
        I/O ports at de00 [size=256]
        Memory at fbcff000 (64-bit, prefetchable) [size=4K]
        Memory at fbcf8000 (64-bit, prefetchable) [size=16K]
        [virtual] Expansion ROM at fbc00000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [70] Express Endpoint, MSI 01
        Capabilities: [ac] MSI-X: Enable- Count=4 Masked-
        Capabilities: [cc] Vital Product Data
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Virtual Channel
        Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00
        Kernel driver in use: r8169

04:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 18
        Memory at fbbfe000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [68] Power Management version 2
        Capabilities: [50] Express Legacy Endpoint, MSI 01
        Kernel driver in use: ahci

04:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 19
        I/O ports at cf00 [size=8]
        I/O ports at ce00 [size=4]
        I/O ports at cd00 [size=8]
        I/O ports at cc00 [size=4]
        I/O ports at cb00 [size=16]
        Capabilities: [68] Power Management version 2
        Kernel driver in use: pata_jmicron

05:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 19
        Memory at fbafe000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [68] Power Management version 2
        Capabilities: [50] Express Legacy Endpoint, MSI 01
        Kernel driver in use: ahci

05:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 85 [Master SecO PriO])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 16
        I/O ports at bf00 [size=8]
        I/O ports at be00 [size=4]
        I/O ports at bd00 [size=8]
        I/O ports at bc00 [size=4]
        I/O ports at bb00 [size=16]
        Capabilities: [68] Power Management version 2
        Kernel driver in use: pata_jmicron

06:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 18
        Memory at fb9fe000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [68] Power Management version 2
        Capabilities: [50] Express Legacy Endpoint, MSI 01
        Kernel driver in use: ahci

06:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 85 [Master SecO PriO])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, fast devsel, latency 0, IRQ 19
        I/O ports at af00 [size=8]
        I/O ports at ae00 [size=4]
        I/O ports at ad00 [size=8]
        I/O ports at ac00 [size=4]
        I/O ports at ab00 [size=16]
        Capabilities: [68] Power Management version 2
        Kernel driver in use: pata_jmicron

07:06.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
        Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard
        Flags: bus master, medium devsel, latency 32, IRQ 17
        Memory at fb7ff000 (32-bit, non-prefetchable) [size=2K]
        Memory at fb7f8000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: firewire_ohci


Alchemikos 01-09-2013 03:52 PM

Yeah, If you want that propietary driver you must start with some tries.

1)Try find some setting ...

Code:

# amdcccle
-"Display Manager" > selected "Multi-display desktop with diplays(s)".
-And reboot

2) Reboot backing in textmode (run level 3) and as root:

Code:

aticonfig --initial
Then
Code:

startx


3) Try other official driver maybe you installed the wrong one...

There's 2 drivers in AMD


4)Search for xorg.conf files as examples and compare with the your.

5) Here there a lot od usefull information:
https://wiki.archlinux.org/index.php/AMD_Catalyst

6) See if the 'randeon' module is blacklisted because it conflicts with fglrx

Good Luck

kn0w- 01-10-2013 03:06 PM

Quote:

Originally Posted by Alchemikos (Post 4866465)
Yeah, If you want that propietary driver you must start with some tries.

1)Try find some setting ...

Code:

# amdcccle
-"Display Manager" > selected "Multi-display desktop with diplays(s)".
-And reboot

2) Reboot backing in textmode (run level 3) and as root:

Code:

aticonfig --initial
Then
Code:

startx


3) Try other official driver maybe you installed the wrong one...

There's 2 drivers in AMD


4)Search for xorg.conf files as examples and compare with the your.

5) Here there a lot od usefull information:
https://wiki.archlinux.org/index.php/AMD_Catalyst

6) See if the 'randeon' module is blacklisted because it conflicts with fglrx

Good Luck

look at the result.;
when active the 3
monitors.

before. without the driver.; AMD ATI>
the default mode slackware. when installed.
he worked. the three monitors.
and now it is giving this error.
after I installed the driver. ATI>



Code:

The current settings cannot be applied.  Possible issues may include:
  - Display(s) cannot be enabled.
  - Setting(s) cannot be applied due to insufficient video memory.


Alchemikos 01-10-2013 05:40 PM

About the message, it looks like a clock issue.

The most of cards have two clocks, DVI and HDMI need one clock each. So for a third monitor you miss one clock more, and there's no.
I think alone here, and I guess that proprietary module doesn't overthread the card as generic does. I'm supposing because i don't know nothing about the subject, yet.

But the Displayport doesn't need clock just an active adapter to convert the signal from Displayport to DVI.
AMD's FAQ : What are the basic requirements for connecting multiple displays?

If you need your 3D aceleration from the proprietary module, you will need an adaptor, and
here a official AMD's list

I saw an adaptor in Amazon for ≅ US$ 35.

Someone agree?

kn0w- 01-10-2013 09:00 PM

Quote:

Originally Posted by Alchemikos (Post 4867349)
About the message, it looks like a clock issue.

The most of cards have two clocks, DVI and HDMI need one clock each. So for a third monitor you miss one clock more, and there's no.
I think alone here, and I guess that proprietary module doesn't overthread the card as generic does. I'm supposing because i don't know nothing about the subject, yet.

But the Displayport doesn't need clock just an active adapter to convert the signal from Displayport to DVI.
AMD's FAQ : What are the basic requirements for connecting multiple displays?

If you need your 3D aceleration from the proprietary module, you will need an adaptor, and
here a official AMD's list

I saw an adaptor in Amazon for ≅ US$ 35.

Someone agree?


depends;
$ 35
'd be here.
$ 35 x2.38 Quote: = R + $ 83.00 Shipping = $ 120 203.00 (cost me an adapter. Herein. In Brazil. Difficult and, adiquirir.) Many taxes. more expensive, the market.

need a solution to unlock my monitor.
before installing the driver, the ATI_Radeon. the pattern of the 3 areas worked , monitors.
because it worked before, and now I can!
have any solution.? If anyone knows.

Alchemikos 01-11-2013 06:58 PM

Quote:

Originally Posted by kn0w- (Post 4867453)

depends;
$ 35
'd be here.
$ 35 x2.38 Quote: = R + $ 83.00 Shipping = $ 120 203.00 (cost me an adapter. Herein. In Brazil. Difficult and, adiquirir.) Many taxes. more expensive, the market.

need a solution to unlock my monitor.
before installing the driver, the ATI_Radeon. the pattern of the 3 areas worked , monitors.
because it worked before, and now I can!
have any solution.? If anyone knows.




I don't sure if the 3 monitors with fglrx module works because I use nvidea and just 2 screens, i researched troubles like yours and found exactly the same in Ubuntu, Debian, or anyother Linux that using the fglrx module shows this trouble, just 2 screens at same time, the third screen dead.

As I sent you the link in AMD site that explains it, you have a decision to take, an adapter DP to hdmi, or generic module/drive. The one that worked in your fresh install.


I know that there's no shades or 3D stuffs....

I'm Brazilian too, and I found at mercado livre an adaptor, really, you have hundreds options to choose, I found a good for R$ 40, in Reais and free shiping

I hope you find a solution, and please post here!

Good Luck

Alchemikos 01-11-2013 07:47 PM

I found it..

http://www.linuxquestions.org/questi...in-x11-402003/


Maybe some detail could put the things to work, or to give an insight
Cheers

kn0w- 01-12-2013 10:50 AM

Quote:

Originally Posted by Alchemikos (Post 4868117)
I found it..

http://www.linuxquestions.org/questi...in-x11-402003/


Maybe some detail could put the things to work, or to give an insight
Cheers

Opa Que bom kk.
pow vou dar uma estudada. se conseguir posto aqui a solução.
eu tentei muito mas dava sempre erros e nos melhores dos casos funcionou, mas os videos ficaram destorcidos. quando istall, o slackware. por padrão o driver. ele funciona os mas tem programas que precisam de alguns dados da placa, para melhor, processarem alguma coisa. e nisto só consigo. instalando o driver. e ai perco 1 monitor.


All times are GMT -5. The time now is 10:15 PM.