mpyusko |
03-10-2011 08:06 AM |
dmesg from 1GHz tower - Part 2
Code:
[ 1.908004] eth0: RTL8110s at 0xf7e00000, e0:91:f5:21:e9:18, XID 04000000 IRQ 5
[ 1.923835] sata_sil 0000:00:0b.0: version 2.4
[ 1.924726] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 1.924734] PCI: setting IRQ 11 as level-triggered
[ 1.924745] sata_sil 0000:00:0b.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 1.925051] scsi2 : sata_sil
[ 1.925553] scsi3 : sata_sil
[ 1.936589] scsi4 : sata_sil
[ 1.937008] scsi5 : sata_sil
[ 1.937112] ata3: SATA max UDMA/100 mmio m1024@0xb5000000 tf 0xb5000080 irq 11
[ 1.937122] ata4: SATA max UDMA/100 mmio m1024@0xb5000000 tf 0xb50000c0 irq 11
[ 1.937130] ata5: SATA max UDMA/100 mmio m1024@0xb5000000 tf 0xb5000280 irq 11
[ 1.937138] ata6: SATA max UDMA/100 mmio m1024@0xb5000000 tf 0xb50002c0 irq 11
[ 1.938872] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.938949] ehci_hcd 0000:00:0e.2: enabling device (0014 -> 0016)
[ 1.939618] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 1.939626] PCI: setting IRQ 9 as level-triggered
[ 1.939636] ehci_hcd 0000:00:0e.2: PCI INT C -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 1.939680] ehci_hcd 0000:00:0e.2: EHCI Host Controller
[ 1.939748] ehci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
[ 1.960086] ehci_hcd 0000:00:0e.2: irq 9, io mem 0xb3000000
[ 1.972044] ehci_hcd 0000:00:0e.2: USB 2.0 started, EHCI 1.00
[ 1.972114] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.972121] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.972128] usb usb1: Product: EHCI Host Controller
[ 1.972134] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.972140] usb usb1: SerialNumber: 0000:00:0e.2
[ 1.972628] usb usb1: configuration #1 chosen from 1 choice
[ 1.972794] hub 1-0:1.0: USB hub found
[ 1.972821] hub 1-0:1.0: 5 ports detected
[ 2.052570] ata1.00: ATA-7: Hitachi HDT725025VLAT80, V5DOA4NA, max UDMA/133
[ 2.052580] ata1.00: 488397168 sectors, multi 16: LBA48
[ 2.073718] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.073902] ata1.00: configured for UDMA/66
[ 2.074225] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72502 V5DO PQ: 0 ANSI: 5
[ 2.075252] uhci_hcd 0000:00:04.2: PCI INT D -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 2.075275] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 2.075314] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 2
[ 2.075360] uhci_hcd 0000:00:04.2: irq 5, io base 0x0000b400
[ 2.075472] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.075480] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.075486] usb usb2: Product: UHCI Host Controller
[ 2.075492] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.075498] usb usb2: SerialNumber: 0000:00:04.2
[ 2.075882] usb usb2: configuration #1 chosen from 1 choice
[ 2.076136] hub 2-0:1.0: USB hub found
[ 2.076163] hub 2-0:1.0: 2 ports detected
[ 2.077382] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.077445] ohci_hcd 0000:00:0e.0: enabling device (0014 -> 0016)
[ 2.078133] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 2.078140] PCI: setting IRQ 10 as level-triggered
[ 2.078151] ohci_hcd 0000:00:0e.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 2.078193] ohci_hcd 0000:00:0e.0: OHCI Host Controller
[ 2.078231] ohci_hcd 0000:00:0e.0: new USB bus registered, assigned bus number 3
[ 2.078278] ohci_hcd 0000:00:0e.0: irq 10, io mem 0xb4000000
[ 2.162164] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.162174] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.162180] usb usb3: Product: OHCI Host Controller
[ 2.162186] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 2.162192] usb usb3: SerialNumber: 0000:00:0e.0
[ 2.162659] usb usb3: configuration #1 chosen from 1 choice
[ 2.162824] hub 3-0:1.0: USB hub found
[ 2.162852] hub 3-0:1.0: 3 ports detected
[ 2.162989] ohci_hcd 0000:00:0e.1: enabling device (0014 -> 0016)
[ 2.163011] ohci_hcd 0000:00:0e.1: PCI INT B -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 2.163052] ohci_hcd 0000:00:0e.1: OHCI Host Controller
[ 2.163075] ohci_hcd 0000:00:0e.1: new USB bus registered, assigned bus number 4
[ 2.163112] ohci_hcd 0000:00:0e.1: irq 5, io mem 0xb3800000
[ 2.246084] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.246093] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.246100] usb usb4: Product: OHCI Host Controller
[ 2.246106] usb usb4: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 2.246112] usb usb4: SerialNumber: 0000:00:0e.1
[ 2.246563] usb usb4: configuration #1 chosen from 1 choice
[ 2.246724] hub 4-0:1.0: USB hub found
[ 2.246753] hub 4-0:1.0: 2 ports detected
[ 2.252398] ata2.00: ATAPI: AOPEN COM5232/AAH, 1.05, max UDMA/33
[ 2.268055] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.268492] ata2.00: configured for UDMA/33
[ 2.276461] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[ 2.276470] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.284428] ata3.00: configured for UDMA/100
[ 2.285569] scsi 1:0:0:0: CD-ROM AOPEN COM5232/AAH 1.05 PQ: 0 ANSI: 5
[ 2.286536] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[ 2.388055] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 2.565346] usb 2-1: New USB device found, idVendor=046d, idProduct=c521
[ 2.565355] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.565361] usb 2-1: Product: USB Receiver
[ 2.565367] usb 2-1: Manufacturer: Logitech
[ 2.565618] usb 2-1: configuration #1 chosen from 1 choice
[ 2.604067] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.612388] ata4.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[ 2.612397] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.628423] ata4.00: configured for UDMA/100
[ 2.628733] scsi 3:0:0:0: Direct-Access ATA Hitachi HDS72101 JP4O PQ: 0 ANSI: 5
[ 2.948057] ata5: SATA link down (SStatus 0 SControl 310)
[ 3.268042] ata6: SATA link down (SStatus 0 SControl 310)
[ 3.391559] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 3.391733] sd 0:0:0:0: [sda] Write Protect is off
[ 3.391742] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.391814] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.392298] sda:
[ 3.392866] sd 2:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.393032] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.393040] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.393110] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.393514] sdb:
[ 3.393984] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.394150] sd 3:0:0:0: [sdc] Write Protect is off
[ 3.394158] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.394228] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.394647] sdc: sda1 sda2 sda3 sda4 < sdb1
[ 3.412745] sdc1
[ 3.414397] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 3.414486] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.416382] usbcore: registered new interface driver hiddev
[ 3.422703] sda5 sda6
[ 3.432564] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.2/usb2/2-1/2-1:1.0/input/input1
[ 3.433004] generic-usb 0003:046D:C521.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.2-1/input0
[ 3.439006] sda7 sda8 sda9 >
[ 3.463808] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.2/usb2/2-1/2-1:1.1/input/input2
[ 3.464942] generic-usb 0003:046D:C521.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.2-1/input1
[ 3.465025] usbcore: registered new interface driver usbhid
[ 3.465502] usbhid: v2.6:USB HID core driver
[ 3.472177] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.509592] sr0: scsi3-mmc drive: 4x/52x writer cd/rw xa/form2 cdda tray
[ 3.509603] Uniform CD-ROM driver Revision: 3.20
[ 3.510807] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.598732] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.600150] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.601517] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.602838] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 4.291692] device-mapper: uevent: version 1.0.3
[ 4.293659] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 4.561733] md: linear personality registered for level -1
[ 4.571510] md: multipath personality registered for level -4
[ 4.579791] md: raid0 personality registered for level 0
[ 4.594424] md: raid1 personality registered for level 1
[ 4.601824] async_tx: api initialized (async)
[ 4.606585] xor: automatically using best checksumming function: pIII_sse
[ 4.624025] pIII_sse : 1988.000 MB/sec
[ 4.624031] xor: using function: pIII_sse (1988.000 MB/sec)
[ 4.700102] raid6: int32x1 318 MB/s
[ 4.768160] raid6: int32x2 349 MB/s
[ 4.836057] raid6: int32x4 277 MB/s
[ 4.904076] raid6: int32x8 256 MB/s
[ 4.972074] raid6: mmxx1 912 MB/s
[ 5.040024] raid6: mmxx2 1164 MB/s
[ 5.108062] raid6: sse1x1 827 MB/s
[ 5.176077] raid6: sse1x2 1105 MB/s
[ 5.176082] raid6: using algorithm sse1x2 (1105 MB/s)
[ 5.202322] md: raid6 personality registered for level 6
[ 5.202330] md: raid5 personality registered for level 5
[ 5.202336] md: raid4 personality registered for level 4
[ 5.225490] md: raid10 personality registered for level 10
[ 5.353958] md: md0 stopped.
[ 5.365535] md: bind<sdc1>
[ 5.365980] md: bind<sdb1>
[ 5.375650] raid1: raid set md0 active with 2 out of 2 mirrors
[ 5.375734] md0: detected capacity change from 0 to 1000201053184
[ 5.378947] md0: unknown partition table
[ 5.836266] PM: Starting manual resume from disk
[ 5.836280] PM: Resume from partition 8:2
[ 5.836284] PM: Checking hibernation image.
[ 5.836627] PM: Error -22 checking image file
[ 5.836633] PM: Resume from disk failed.
[ 5.863920] REISERFS (device sda6): found reiserfs format "3.6" with standard journal
[ 5.863976] REISERFS (device sda6): using ordered data mode
[ 5.886220] REISERFS (device sda6): journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 5.891235] REISERFS (device sda6): checking transaction log (sda6)
[ 5.910461] REISERFS (device sda6): Using r5 hash to sort names
[ 6.784796] udev[328]: starting version 164
[ 7.448878] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.682653] Marking TSC unstable due to TSC halts in idle
[ 7.683782] processor LNXCPU:00: registered as cooling_device0
[ 7.692434] Switching to clocksource acpi_pm
[ 7.715903] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 7.715929] ACPI: Power Button [PWRB]
[ 7.716493] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.716508] ACPI: Power Button [PWRF]
[ 7.795635] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.880386] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.909532] parport_pc 00:09: reported by Plug and Play ACPI
[ 7.909661] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 8.226701] [drm] Initialized drm 1.1.0 20060810
[ 8.948576] [drm] radeon kernel modesetting enabled.
[ 8.948747] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 8.963375] [drm] radeon: Initializing kernel modesetting.
[ 8.963625] [drm] register mmio base: 0xB7000000
[ 8.963630] [drm] register mmio size: 65536
[ 8.964966] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 8.965732] [drm] Generation 2 PCI interface, using max accessible memory
[ 8.965756] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[ 8.965791] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[ 8.965847] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[ 8.965861] [drm] radeon: VRAM 128M
[ 8.965866] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[ 8.965871] [drm] radeon: GTT 256M
[ 8.965876] [drm] radeon: GTT from 0xD0000000 to 0xDFFFFFFF
[ 8.965939] [drm] radeon: irq initialized.
[ 8.965954] [drm] Detected VRAM RAM=128M, BAR=128M
[ 8.965959] [drm] RAM width 128bits DDR
[ 8.966130] [TTM] Zone kernel: Available graphics memory: 441482 kiB.
[ 8.966137] [TTM] Zone highmem: Available graphics memory: 1037446 kiB.
[ 8.966187] [drm] radeon: 128M of VRAM memory ready
[ 8.966193] [drm] radeon: 256M of GTT memory ready.
[ 8.966437] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 8.966456] [drm] radeon: cp idle (0x10000C03)
[ 8.966549] [drm] Loading R300 Microcode
[ 8.967637] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 8.976306] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 8.987067] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 8.987115] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 8.987155] radeon 0000:01:00.0: failled initializing CP (-2).
[ 8.987192] radeon 0000:01:00.0: Disabling GPU acceleration
[ 8.987232] [drm] radeon: cp finalized
[ 8.987459] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 8.987465] [drm] radeon: cp finalized
[ 8.988514] [TTM] Zone kernel: Used memory at exit: 0 kiB.
[ 8.988530] [TTM] Zone highmem: Used memory at exit: 0 kiB.
[ 8.988539] [drm] radeon: ttm finalized
[ 8.988551] [drm] Forcing AGP to PCI mode
[ 8.989742] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 8.989762] [drm] Generation 2 PCI interface, using max accessible memory
[ 8.989771] [drm] radeon: VRAM 128M
[ 8.989776] [drm] radeon: VRAM from 0x00000000 to 0x07FFFFFF
[ 8.989781] [drm] radeon: GTT 512M
[ 8.989785] [drm] radeon: GTT from 0x20000000 to 0x3FFFFFFF
[ 8.989822] [drm] radeon: irq initialized.
[ 8.989840] [drm] Detected VRAM RAM=128M, BAR=128M
[ 8.989845] [drm] RAM width 128bits DDR
[ 8.996203] [TTM] Zone kernel: Available graphics memory: 441482 kiB.
[ 8.996211] [TTM] Zone highmem: Available graphics memory: 1037446 kiB.
[ 8.996265] [drm] radeon: 128M of VRAM memory ready
[ 8.996271] [drm] radeon: 512M of GTT memory ready.
[ 8.996280] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 9.001931] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 9.001953] [drm] radeon: cp idle (0x10000C03)
[ 9.014776] [drm] Loading R300 Microcode
[ 9.014989] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 9.039633] radeon_cp: Failed to load firmware "radeon/R300_cp.bin"
[ 9.039681] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 9.039720] radeon 0000:01:00.0: failled initializing CP (-2).
[ 9.039758] radeon 0000:01:00.0: Disabling GPU acceleration
[ 9.039797] [drm] radeon: cp finalized
[ 9.055272] [drm] Default TV standard: PAL
[ 9.055280] [drm] 27.000000000 MHz TV ref clk
[ 9.055289] [drm] DFP table revision: 4
[ 9.056523] [drm] Default TV standard: PAL
[ 9.056529] [drm] 27.000000000 MHz TV ref clk
[ 9.056667] [drm] Radeon Display Connectors
[ 9.056673] [drm] Connector 0:
[ 9.056677] [drm] VGA
[ 9.056684] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 9.056689] [drm] Encoders:
[ 9.056694] [drm] CRT1: INTERNAL_DAC1
[ 9.056698] [drm] Connector 1:
[ 9.056702] [drm] DVI-I
[ 9.056706] [drm] HPD1
[ 9.056712] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 9.056717] [drm] Encoders:
[ 9.056721] [drm] CRT2: INTERNAL_DAC2
[ 9.056725] [drm] DFP1: INTERNAL_TMDS1
[ 9.056729] [drm] Connector 2:
[ 9.056733] [drm] S-video
[ 9.056736] [drm] Encoders:
[ 9.056740] [drm] TV1: INTERNAL_DAC2
[ 9.233014] Sound Fusion CS46xx 0000:00:09.0: enabling device (0004 -> 0006)
[ 9.233040] Sound Fusion CS46xx 0000:00:09.0: PCI INT A -> Link[LNKD] -> GSI 5 (level, low) -> IRQ 5
[ 9.306635] [drm] fb mappable at 0xC8040000
[ 9.306640] [drm] vram apper at 0xC8000000
[ 9.306645] [drm] size 3145728
[ 9.306649] [drm] fb depth is 24
[ 9.306653] [drm] pitch is 4096
[ 9.390146] Console: switching to colour frame buffer device 128x48
[ 9.415173] fb0: radeondrmfb frame buffer device
[ 9.415178] registered panic notifier
[ 9.415703] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 9.772487] Sound Fusion CS46xx 0000:00:09.0: firmware: requesting cs46xx/cs46xx-old.fw
[ 9.779148] cs46xx: no firmware
[ 9.779324] image download error
[ 9.779868] Sound Fusion CS46xx 0000:00:09.0: PCI INT A disabled
[ 9.779890] Sound Fusion CS46xx: probe of 0000:00:09.0 failed with error -5
[ 10.427691] Adding 996020k swap on /dev/sda2. Priority:-1 extents:1 across:996020k
[ 11.069386] loop: module loaded
[ 12.382998] REISERFS (device sda1): found reiserfs format "3.6" with standard journal
[ 12.383085] REISERFS (device sda1): using ordered data mode
[ 12.391349] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 12.396458] REISERFS (device sda1): checking transaction log (sda1)
[ 12.410285] REISERFS (device sda1): Using r5 hash to sort names
[ 12.457005] REISERFS (device sda3): found reiserfs format "3.6" with standard journal
[ 12.457095] REISERFS (device sda3): using ordered data mode
[ 12.463382] REISERFS (device sda3): journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 12.468472] REISERFS (device sda3): checking transaction log (sda3)
[ 12.493541] REISERFS (device sda3): Using r5 hash to sort names
[ 12.553330] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
[ 12.553434] REISERFS (device sda8): using ordered data mode
[ 12.559878] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 12.564945] REISERFS (device sda8): checking transaction log (sda8)
[ 12.573662] REISERFS (device sda8): Using r5 hash to sort names
[ 12.700632] REISERFS (device sda9): found reiserfs format "3.6" with standard journal
[ 12.700732] REISERFS (device sda9): using ordered data mode
[ 12.707157] REISERFS (device sda9): journal params: device sda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 12.712322] REISERFS (device sda9): checking transaction log (sda9)
[ 12.763851] REISERFS (device sda9): Using r5 hash to sort names
[ 12.826702] REISERFS (device sda5): found reiserfs format "3.6" with standard journal
[ 12.826799] REISERFS (device sda5): using ordered data mode
[ 12.831932] REISERFS (device sda5): journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 12.836975] REISERFS (device sda5): checking transaction log (sda5)
[ 12.873683] REISERFS (device sda5): Using r5 hash to sort names
[ 12.978057] REISERFS (device sda7): found reiserfs format "3.6" with standard journal
[ 12.978159] REISERFS (device sda7): using ordered data mode
[ 12.985979] REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 12.991089] REISERFS (device sda7): checking transaction log (sda7)
[ 13.029925] REISERFS (device sda7): Using r5 hash to sort names
[ 13.051203] REISERFS (device md0): found reiserfs format "3.6" with standard journal
[ 13.051332] REISERFS (device md0): using ordered data mode
[ 13.052339] REISERFS (device md0): journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 13.057548] REISERFS (device md0): checking transaction log (md0)
[ 13.103390] REISERFS (device md0): Using r5 hash to sort names
[ 14.087911] r8169: eth0: link up
[ 14.842919] RPC: Registered udp transport module.
[ 14.842928] RPC: Registered tcp transport module.
[ 14.842933] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.103145] Slow work thread pool: Starting up
[ 15.103293] Slow work thread pool: Ready
[ 15.103491] FS-Cache: Loaded
[ 15.501510] FS-Cache: Netfs 'nfs' registered for caching
[ 15.641652] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 16.063506] fuse init (API version 7.13)
[ 17.440891] svc: failed to register lockdv1 RPC service (errno 97).
[ 17.448957] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 17.468758] NFSD: starting 90-second grace period
[ 19.914685] lp0: using parport0 (interrupt-driven).
[ 20.040714] ppdev: user-space parallel port driver
|