LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
Reload this Page Sdhc unreadable
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 07-16-2022, 10:28 AM   #1
SrChief
LQ Newbie
 
Registered: Jul 2022
Location: NC
Distribution: Mint Una
Posts: 9

Rep: Reputation: 0
Sdhc unreadable

Running linux mint una on older macbook. It will read sd cards but will not read or recognize my sdhc cards. Any ideas how to resolve this? Im new to Linux and have much to learn. I appreciate your patience.
 
Old 07-16-2022, 12:51 PM   #2
Debian6to11
Member
 
Registered: Jan 2022
Location: Limassol, Cyprus
Distribution: Debian
Posts: 382
Blog Entries: 1

Rep: Reputation: 71
Does your macbook support reading SDHC cards? They have different standards.

https://en.wikipedia.org/wiki/SD_card
 
Old 07-16-2022, 02:36 PM   #3
rokytnji
LQ Veteran
 
Registered: Mar 2008
Location: Waaaaay out West Texas
Distribution: antiX 23, MX 23
Posts: 7,300
Blog Entries: 21

Rep: Reputation: 3505Reputation: 3505Reputation: 3505Reputation: 3505Reputation: 3505Reputation: 3505Reputation: 3505Reputation: 3505Reputation: 3505Reputation: 3505Reputation: 3505
Also if fdisk or parted

Code:
sudo fdisk -l
Code:
sudo parted -l
don't see it as well as the command

Code:
mount
Then I would run

Code:
dmesg
to look for sdhc errors. Might even be in red text. Also. To get by limitions like this.
I keep a usb card reader that reads every card under the sun. Just plug the adapter into usb.
Vivitar makes a 50 in 1 usb card reader. Google will find such stuff for you.
Last edited by rokytnji; 07-16-2022 at 02:42 PM.
 
Old 07-16-2022, 09:18 PM   #4
SrChief
LQ Newbie
 
Registered: Jul 2022
Location: NC
Distribution: Mint Una
Posts: 9

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by Debian6to11 View Post
Does your macbook support reading SDHC cards? They have different standards.

https://en.wikipedia.org/wiki/SD_card
When its runs as a mac it reads them fine. Im hoping to keep from rebooting and just keep linux running
 
Old 07-18-2022, 08:18 AM   #5
TB0ne
LQ Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 27,800

Rep: Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197
Quote:
Originally Posted by SrChief View Post
When its runs as a mac it reads them fine. Im hoping to keep from rebooting and just keep linux running
The question I'd ask is what file system is on those cards? If they're formatted for Apple and use HFS or another Apple file system, you may not have the right modules loaded (by default) to mount/read/recognize the card.

A simple troubleshooting step; without the card plugged in, run "sudo dmesg -c". Then plug the card in, wait a few seconds, and run "dmesg", to see what output you have, and post it here. If the DEVICE is working, you should see output, and some messages about disk errors/bad blocks/unrecognized/who-knows...which will let you know you're just missing modules.

If you have a spare SDHC card, you can also shove it in, and try to format it using fdisk or gparted.
 
Old 07-18-2022, 07:09 PM   #6
SrChief
LQ Newbie
 
Registered: Jul 2022
Location: NC
Distribution: Mint Una
Posts: 9

Original Poster
Rep: Reputation: 0
[ 2545.055225] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e0:f8:47:3f:7b:c0:9e:bc:34:f0:4c:66:08:00 SRC=192.168.1.104 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=53645 PROTO=2
[ 2561.871626] mmc0: card aaaa removed
ken@ken-MacBookPro:~$ dmesg
[ 2600.205576] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:90:f6:52:43:c4:1c:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2
[ 2608.098457] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e0:f8:47:3f:7b:c0:8e:46:32:65:0c:99:08:00 SRC=192.168.1.103 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=406 PROTO=2
[ 2622.129231] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e0:f8:47:3f:7b:c0:be:2d:be:54:df:ea:08:00 SRC=192.168.1.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=54788 PROTO=2
[ 2643.484263] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[ 2643.485132] mmcblk0: mmc0:aaaa SS32G 29.7 GiB
[ 2643.486242] mmc0: Unexpected interrupt 0x04000000.
[ 2643.486252] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2643.486295] mmc0: sdhci: Sys addr: 0x000000c8 | Version: 0x00001502
[ 2643.486305] mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
[ 2643.486315] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b
[ 2643.486327] mmc0: sdhci: Present: 0x1fff0000 | Host ctl: 0x0000001f
[ 2643.486338] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2643.486348] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2643.486358] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2643.486367] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b
[ 2643.486378] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2643.486389] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2643.486400] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000
[ 2643.486410] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2643.486420] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2643.486428] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2643.486441] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2643.486445] mmc0: sdhci: ============================================
[ 2643.540317] mmc0: Unexpected interrupt 0x04000000.
[ 2643.540325] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2643.540333] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2643.540341] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2643.540349] mmc0: sdhci: Argument: 0xaaaa0000 | Trn mode: 0x00000010
[ 2643.540357] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x0000001f
[ 2643.540364] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2643.540372] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2643.540379] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2643.540387] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b
[ 2643.540394] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2643.540402] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2643.540410] mmc0: sdhci: Cmd: 0x00000d1a | Max curr: 0x00000000
[ 2643.540417] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2643.540425] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2643.540429] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2643.540439] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2643.540443] mmc0: sdhci: ============================================
[ 2643.541139] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.116549] mmc0: Unexpected interrupt 0x04000000.
[ 2649.116557] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.116596] mmc0: sdhci: Sys addr: 0x00000040 | Version: 0x00001502
[ 2649.116604] mmc0: sdhci: Blk size: 0x00007200 | Blk cnt: 0x00000008
[ 2649.116612] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x0000003b
[ 2649.116619] mmc0: sdhci: Present: 0x1fff0000 | Host ctl: 0x0000001f
[ 2649.116627] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.116635] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.116642] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.116650] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b
[ 2649.116658] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.116665] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.116673] mmc0: sdhci: Cmd: 0x0000123a | Max curr: 0x00000000
[ 2649.116680] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.116688] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.116693] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.116704] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.116706] mmc0: sdhci: ============================================
[ 2649.161925] mmc0: Unexpected interrupt 0x04000000.
[ 2649.161936] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.161944] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.161952] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.161960] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000010
[ 2649.161968] mmc0: sdhci: Present: 0x1fff0207 | Host ctl: 0x0000001f
[ 2649.161975] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.161983] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.161990] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.161997] mmc0: sdhci: Int enab: 0x00000020 | Sig enab: 0x00000020
[ 2649.162005] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.162013] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.162020] mmc0: sdhci: Cmd: 0x0000133a | Max curr: 0x00000000
[ 2649.162029] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.162036] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.162042] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.162052] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.162055] mmc0: sdhci: ============================================
[ 2649.173149] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.173158] mmcblk0: recovery failed!
[ 2649.173184] print_req_error: 4 callbacks suppressed
[ 2649.173189] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0READ) flags 0x0 phys_seg 1 prio class 0
[ 2649.173198] buffer_io_error: 3 callbacks suppressed
[ 2649.173200] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 2649.228419] mmc0: Unexpected interrupt 0x04000000.
[ 2649.228428] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.228436] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.228444] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.228452] mmc0: sdhci: Argument: 0xaaaa0000 | Trn mode: 0x00000010
[ 2649.228460] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x0000001f
[ 2649.228468] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.228475] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.228483] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.228491] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b
[ 2649.228498] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.228506] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.228514] mmc0: sdhci: Cmd: 0x00000d1a | Max curr: 0x00000000
[ 2649.228522] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.228530] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.228535] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.228545] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.228548] mmc0: sdhci: ============================================
[ 2649.229231] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.229236] mmcblk0: recovery failed!
[ 2649.229264] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0READ) flags 0x0 phys_seg 1 prio class 0
[ 2649.229273] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 2649.260253] mmc0: Unexpected interrupt 0x04000000.
[ 2649.260264] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.260272] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.260281] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.260289] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000010
[ 2649.260297] mmc0: sdhci: Present: 0x1fff0207 | Host ctl: 0x0000001f
[ 2649.260305] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.260312] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.260319] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.260327] mmc0: sdhci: Int enab: 0x00000020 | Sig enab: 0x00000020
[ 2649.260334] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.260342] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.260349] mmc0: sdhci: Cmd: 0x0000133a | Max curr: 0x00000000
[ 2649.260357] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.260364] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.260370] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.260380] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.260383] mmc0: sdhci: ============================================
[ 2649.285140] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.285150] mmcblk0: recovery failed!
[ 2649.285179] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0READ) flags 0x0 phys_seg 1 prio class 0
[ 2649.285188] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 2649.285215] ldm_validate_partition_table(): Disk read failed.
[ 2649.340414] mmc0: Unexpected interrupt 0x04000000.
[ 2649.340422] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.340431] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.340439] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.340447] mmc0: sdhci: Argument: 0xaaaa0000 | Trn mode: 0x00000010
[ 2649.340454] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x0000001f
[ 2649.340462] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.340470] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.340477] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.340485] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b
[ 2649.340493] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.340500] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.340508] mmc0: sdhci: Cmd: 0x00000d1a | Max curr: 0x00000000
[ 2649.340515] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.340523] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.340528] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.340539] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.340541] mmc0: sdhci: ============================================
[ 2649.341228] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.341233] mmcblk0: recovery failed!
[ 2649.341261] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0READ) flags 0x0 phys_seg 1 prio class 0
[ 2649.341270] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 2649.396419] mmc0: Unexpected interrupt 0x04000000.
[ 2649.396428] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.396436] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.396444] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.396452] mmc0: sdhci: Argument: 0xaaaa0000 | Trn mode: 0x00000010
[ 2649.396460] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x0000001f
[ 2649.396468] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.396475] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.396483] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.396491] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b
[ 2649.396498] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.396506] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.396514] mmc0: sdhci: Cmd: 0x00000d1a | Max curr: 0x00000000
[ 2649.396521] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.396529] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.396534] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.396544] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.396547] mmc0: sdhci: ============================================
[ 2649.397234] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.397239] mmcblk0: recovery failed!
[ 2649.397266] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0READ) flags 0x0 phys_seg 1 prio class 0
[ 2649.397275] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 2649.452399] mmc0: Unexpected interrupt 0x04000000.
[ 2649.452408] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.452416] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.452424] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.452432] mmc0: sdhci: Argument: 0xaaaa0000 | Trn mode: 0x00000010
[ 2649.452439] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x0000001f
[ 2649.452447] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.452455] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.452462] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.452470] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b
[ 2649.452477] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.452485] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.452492] mmc0: sdhci: Cmd: 0x00000d1a | Max curr: 0x00000000
[ 2649.452500] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.452507] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.452512] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.452523] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.452525] mmc0: sdhci: ============================================
[ 2649.453240] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.453245] mmcblk0: recovery failed!
[ 2649.453272] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0READ) flags 0x0 phys_seg 1 prio class 0
[ 2649.453281] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 2649.469124] mmc0: Unexpected interrupt 0x04000000.
[ 2649.469136] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.469144] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.469152] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.469160] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000010
[ 2649.469167] mmc0: sdhci: Present: 0x1fff0207 | Host ctl: 0x0000001f
[ 2649.469174] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.469182] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.469189] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.469197] mmc0: sdhci: Int enab: 0x00000020 | Sig enab: 0x00000020
[ 2649.469204] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.469212] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.469220] mmc0: sdhci: Cmd: 0x0000133a | Max curr: 0x00000000
[ 2649.469227] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.469235] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.469240] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.469250] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.469253] mmc0: sdhci: ============================================
[ 2649.509170] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.509180] mmcblk0: recovery failed!
[ 2649.509208] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0READ) flags 0x0 phys_seg 1 prio class 0
[ 2649.509217] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 2649.509245] Dev mmcblk0: unable to read RDB block 0
[ 2649.564422] mmc0: Unexpected interrupt 0x04000000.
[ 2649.564431] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.564440] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.564447] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.564455] mmc0: sdhci: Argument: 0xaaaa0000 | Trn mode: 0x00000010
[ 2649.564463] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x0000001f
[ 2649.564471] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.564478] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.564486] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.564493] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b
[ 2649.564501] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.564508] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.564516] mmc0: sdhci: Cmd: 0x00000d1a | Max curr: 0x00000000
[ 2649.564523] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.564531] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.564536] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.564546] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.564549] mmc0: sdhci: ============================================
[ 2649.565227] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.565232] mmcblk0: recovery failed!
[ 2649.565260] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0READ) flags 0x0 phys_seg 1 prio class 0
[ 2649.565269] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 2649.567431] mmc0: Unexpected interrupt 0x04000000.
[ 2649.567440] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.567448] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.567456] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.567464] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000010
[ 2649.567472] mmc0: sdhci: Present: 0x1fff0207 | Host ctl: 0x0000001f
[ 2649.567479] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.567487] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.567494] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.567502] mmc0: sdhci: Int enab: 0x00000020 | Sig enab: 0x00000020
[ 2649.567510] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.567517] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.567525] mmc0: sdhci: Cmd: 0x0000133a | Max curr: 0x00000000
[ 2649.567533] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.567540] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.567545] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.567556] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.567559] mmc0: sdhci: ============================================
[ 2649.621159] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.621169] mmcblk0: recovery failed!
[ 2649.621197] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0READ) flags 0x0 phys_seg 1 prio class 0
[ 2649.621206] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[ 2649.676400] mmc0: Unexpected interrupt 0x04000000.
[ 2649.676408] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.676416] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.676424] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.676432] mmc0: sdhci: Argument: 0xaaaa0000 | Trn mode: 0x00000010
[ 2649.676440] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x0000001f
[ 2649.676447] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.676455] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.676462] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.676470] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b
[ 2649.676477] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.676485] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.676493] mmc0: sdhci: Cmd: 0x00000d1a | Max curr: 0x00000000
[ 2649.676500] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.676508] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.676513] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.676523] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.676526] mmc0: sdhci: ============================================
[ 2649.677255] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.677259] mmcblk0: recovery failed!
[ 2649.677286] blk_update_request: I/O error, dev mmcblk0, sector 24 op 0x0READ) flags 0x0 phys_seg 1 prio class 0
[ 2649.677296] Buffer I/O error on dev mmcblk0, logical block 3, async page read
[ 2649.732425] mmc0: Unexpected interrupt 0x04000000.
[ 2649.732434] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.732442] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.732450] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.732458] mmc0: sdhci: Argument: 0xaaaa0000 | Trn mode: 0x00000010
[ 2649.732466] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x0000001f
[ 2649.732474] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.732481] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.732489] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.732496] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b
[ 2649.732504] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.732511] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.732519] mmc0: sdhci: Cmd: 0x00000d1a | Max curr: 0x00000000
[ 2649.732527] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.732534] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.732540] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.732550] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.732553] mmc0: sdhci: ============================================
[ 2649.733231] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.733236] mmcblk0: recovery failed!
[ 2649.776341] mmc0: Unexpected interrupt 0x04000000.
[ 2649.776351] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.776360] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.776367] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.776375] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000010
[ 2649.776382] mmc0: sdhci: Present: 0x1fff0207 | Host ctl: 0x0000001f
[ 2649.776390] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.776397] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.776405] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.776413] mmc0: sdhci: Int enab: 0x00000020 | Sig enab: 0x00000020
[ 2649.776420] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.776428] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.776435] mmc0: sdhci: Cmd: 0x0000133a | Max curr: 0x00000000
[ 2649.776443] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.776451] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.776456] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.776466] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.776469] mmc0: sdhci: ============================================
[ 2649.789146] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.789156] mmcblk0: recovery failed!
[ 2649.789207] mmcblk0: unable to read partition table
[ 2649.868423] mmc0: Unexpected interrupt 0x04000000.
[ 2649.868432] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.868440] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.868448] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.868456] mmc0: sdhci: Argument: 0xaaaa0000 | Trn mode: 0x00000010
[ 2649.868463] mmc0: sdhci: Present: 0x1fff0001 | Host ctl: 0x0000001f
[ 2649.868471] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.868480] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.868487] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.868495] mmc0: sdhci: Int enab: 0x03ff008b | Sig enab: 0x03ff008b
[ 2649.868502] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.868510] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.868518] mmc0: sdhci: Cmd: 0x00000d1a | Max curr: 0x00000000
[ 2649.868526] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.868533] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.868539] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.868549] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.868552] mmc0: sdhci: ============================================
[ 2649.869223] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.869228] mmcblk0: recovery failed!
[ 2649.874603] mmc0: Unexpected interrupt 0x04000000.
[ 2649.874613] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2649.874621] mmc0: sdhci: Sys addr: 0x00000000 | Version: 0x00001502
[ 2649.874629] mmc0: sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000008
[ 2649.874637] mmc0: sdhci: Argument: 0x00000000 | Trn mode: 0x00000010
[ 2649.874645] mmc0: sdhci: Present: 0x1fff0207 | Host ctl: 0x0000001f
[ 2649.874652] mmc0: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
[ 2649.874660] mmc0: sdhci: Wake-up: 0x00000000 | Clock: 0x00000007
[ 2649.874667] mmc0: sdhci: Timeout: 0x0000000a | Int stat: 0x00000000
[ 2649.874675] mmc0: sdhci: Int enab: 0x00000020 | Sig enab: 0x00000020
[ 2649.874682] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2649.874690] mmc0: sdhci: Caps: 0x176ec8b0 | Caps_1: 0x03002177
[ 2649.874698] mmc0: sdhci: Cmd: 0x0000133a | Max curr: 0x00000000
[ 2649.874705] mmc0: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0x00000000
[ 2649.874713] mmc0: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
[ 2649.874718] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2649.874728] mmc0: sdhci: ADMA Err: 0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2649.874731] mmc0: sdhci: ============================================
[ 2649.925140] sdhci-pci 0000:02:00.1: error -110 requesting status
[ 2649.925149] mmcblk0: recovery failed!
[ 2652.246128] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e0:f8:47:3f:7b:c0:9e:bc:34:f0:4c:66:08:00 SRC=192.168.1.104 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=22993 PROTO=2
 
Old 07-19-2022, 07:46 AM   #7
TB0ne
LQ Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 27,800

Rep: Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197
Quote:
Originally Posted by SrChief View Post
Code:
[ 2545.055225] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e0:f8:47:3f:7b:c0:9e:bc:34:f0:4c:66:08:00 SRC=192.168.1.104 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=53645 PROTO=2 
[ 2561.871626] mmc0: card aaaa removed
ken@ken-MacBookPro:~$ dmesg
[ 2600.205576] [UFW BLOCK] IN=wlp3s0 OUT= MAC=01:00:5e:00:00:01:90:f6:52:43:c4:1c:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
[ 2608.098457] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e0:f8:47:3f:7b:c0:8e:46:32:65:0c:99:08:00 SRC=192.168.1.103 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=406 PROTO=2 
[ 2622.129231] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e0:f8:47:3f:7b:c0:be:2d:be:54:df:ea:08:00 SRC=192.168.1.102 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=54788 PROTO=2 
[ 2643.484263] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[ 2643.485132] mmcblk0: mmc0:aaaa SS32G 29.7 GiB 
[ 2643.486242] mmc0: Unexpected interrupt 0x04000000.
[ 2643.486252] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2643.486295] mmc0: sdhci: Sys addr:  0x000000c8 | Version:  0x00001502
[ 2643.486305] mmc0: sdhci: Blk size:  0x00007200 | Blk cnt:  0x00000008
[ 2643.486315] mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x0000003b
[ 2643.486327] mmc0: sdhci: Present:   0x1fff0000 | Host ctl: 0x0000001f
[ 2643.486338] mmc0: sdhci: Power:     0x0000000f | Blk gap:  0x00000000
[ 2643.486348] mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[ 2643.486358] mmc0: sdhci: Timeout:   0x0000000a | Int stat: 0x00000000
[ 2643.486367] mmc0: sdhci: Int enab:  0x03ff008b | Sig enab: 0x03ff008b
[ 2643.486378] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2643.486389] mmc0: sdhci: Caps:      0x176ec8b0 | Caps_1:   0x03002177
[ 2643.486400] mmc0: sdhci: Cmd:       0x0000123a | Max curr: 0x00000000
[ 2643.486410] mmc0: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x00000000
[ 2643.486420] mmc0: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
[ 2643.486428] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2643.486441] mmc0: sdhci: ADMA Err:  0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2643.486445] mmc0: sdhci: ============================================
[ 2643.540317] mmc0: Unexpected interrupt 0x04000000.
[ 2643.540325] mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
[ 2643.540333] mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00001502
[ 2643.540341] mmc0: sdhci: Blk size:  0x00007040 | Blk cnt:  0x00000008
[ 2643.540349] mmc0: sdhci: Argument:  0xaaaa0000 | Trn mode: 0x00000010
[ 2643.540357] mmc0: sdhci: Present:   0x1fff0001 | Host ctl: 0x0000001f
[ 2643.540364] mmc0: sdhci: Power:     0x0000000f | Blk gap:  0x00000000
[ 2643.540372] mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x00000007
[ 2643.540379] mmc0: sdhci: Timeout:   0x0000000a | Int stat: 0x00000000
[ 2643.540387] mmc0: sdhci: Int enab:  0x03ff008b | Sig enab: 0x03ff008b
[ 2643.540394] mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000000
[ 2643.540402] mmc0: sdhci: Caps:      0x176ec8b0 | Caps_1:   0x03002177
[ 2643.540410] mmc0: sdhci: Cmd:       0x00000d1a | Max curr: 0x00000000
[ 2643.540417] mmc0: sdhci: Resp[0]:   0x00000900 | Resp[1]:  0x00000000
[ 2643.540425] mmc0: sdhci: Resp[2]:   0x00000000 | Resp[3]:  0x00000000
[ 2643.540429] mmc0: sdhci: Host ctl2: 0x0000800c
[ 2643.540439] mmc0: sdhci: ADMA Err:  0x00000001 | ADMA Ptr: 0x00000002644df204
[ 2643.540443] mmc0: sdhci: ============================================
[ 2649.869228] mmcblk0: recovery failed!
[ 2649.874603] mmc0: Unexpected interrupt 0x04000000.
[ 2649.925149] mmcblk0: recovery failed!
[ 2652.246128] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e0:f8:47:3f:7b:c0:9e:bc:34:f0:4c:66:08:00 SRC=192.168.1.104 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=22993 PROTO=2
Use CODE tags when posting such things....just shoving a huge chunk of (mostly repeated) output with nothing else into a thread doesn't make it easier to read.

This tells you that the card reader is recognized, and it is saying there are read/block errors. Since you've just posted a huge chunk of output with no context, there's not much we can tell you beyond the card reader appears to be working. You still haven't told us what filesystem is on that card, anything you've done/tried to mount or read it, or if you tried to format a card in that device specifically for use with Linux.

Again; what is the file system on that card (as in, what was used to format it initially?), what version of Mint are you using, and can you format an SDHC card to experiment with??
 
Old 07-19-2022, 08:35 AM   #8
SrChief
LQ Newbie
 
Registered: Jul 2022
Location: NC
Distribution: Mint Una
Posts: 9

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by TB0ne View Post
Use CODE tags when posting such things....just shoving a huge chunk of (mostly repeated) output with nothing else into a thread doesn't make it easier to read.

This tells you that the card reader is recognized, and it is saying there are read/block errors. Since you've just posted a huge chunk of output with no context, there's not much we can tell you beyond the card reader appears to be working. You still haven't told us what filesystem is on that card, anything you've done/tried to mount or read it, or if you tried to format a card in that device specifically for use with Linux.

Again; what is the file system on that card (as in, what was used to format it initially?), what version of Mint are you using, and can you format an SDHC card to experiment with??
It was formatted on a mac for a moultrie game camera and a slr camera, FAT as i recalI. was sure the reader was working since it worked fine with a standard sd card that was formatted for the same purpose. It just doesnt acknowledge the sdhc card when inserted. It will beep when inserted but nothing else. Doesnt show up in file manager either. Im using the latest version of mint, una. Im new to linux and have much to learn. I appreciate your patience. When i boot into mac os, it reads it fine using the same card slot. Sorry for all the code, wasnt sure it was all needed or not. Didnt want to leave anything important out
 
Old 07-19-2022, 08:44 AM   #9
TB0ne
LQ Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 27,800

Rep: Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197
Quote:
Originally Posted by SrChief View Post
It was formatted on a mac for a moultrie game camera and a slr camera, FAT as i recalI. was sure the reader was working since it worked fine with a standard sd card that was formatted for the same purpose. It just doesnt acknowledge the sdhc card when inserted. It will beep when inserted but nothing else. Doesnt show up in file manager either. Im using the latest version of mint, una. Im new to linux and have much to learn. I appreciate your patience. When i boot into mac os, it reads it fine using the same card slot. Sorry for all the code, wasnt sure it was all needed or not. Didnt want to leave anything important out
Gotcha, but when it starts to repeat, there's no need to post more. And please use CODE tags to make it readable.

All that said, if you had told us it beeped when inserted, that would have told us the reader device was recognized. Also, there are different types of FAT file systems, and if you don't have the modules loaded it won't be recognized. Try running "sudo apt install exfat-utils exfat-fuse" with the card removed, then re-insert. FAT file systems can be vfat, fat32, or exfat..without the module, you can't read it. Since it was for use in a DSLR, chances are it's exfat.
 
Old 07-19-2022, 09:11 AM   #10
SrChief
LQ Newbie
 
Registered: Jul 2022
Location: NC
Distribution: Mint Una
Posts: 9

Original Poster
Rep: Reputation: 0
Understood. What is a code tag? Ran that command. after reinserting no beep but will sound when removed. IIRC its Fat32.
I dont think this computer is capable of reading sdhc cards.
Last edited by SrChief; 07-19-2022 at 09:25 AM.
 
Old 07-19-2022, 09:26 AM   #11
TB0ne
LQ Guru
 
Registered: Jul 2003
Location: Birmingham, Alabama
Distribution: SuSE, RedHat, Slack,CentOS
Posts: 27,800

Rep: Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197Reputation: 8197
Quote:
Originally Posted by SrChief View Post
Understood. What is a code tag? Ran that command. after reinserting no beep but will sound when removed. IIRC its Fat32.
If you look at the top of the editor window, and hover over the # tag, you'll see it say "Wrap CODE tags around selected area".

And did you reboot after installing those modules?? What was the output of that command?? What are the last parts of dmesg after installing the modules?? To go through steps again:
  • Reboot
  • Run "sudo dmesg -c" with the card removed.
  • Run "ls /dev/sd*" and look at what it says, as well as "ls /dev/mm*"
  • Insert the card, then run "dmesg" and post what it says IN CODE TAGS.
  • Run "ls /dev/sd*" and "ls /dev/mm*" again, and look for anything different. Make note of the differences.
 
Old 07-19-2022, 03:45 PM   #12
SrChief
LQ Newbie
 
Registered: Jul 2022
Location: NC
Distribution: Mint Una
Posts: 9

Original Poster
Rep: Reputation: 0
The ls /dev/sd* command brings back the same thing with and without the sd card inserted.
ls /dev/mm* brings back ls: cannot access '/dev/mm*': No such file or directory

After reboot, it seems to be working. I cant thank you enough!!
Last edited by SrChief; 07-19-2022 at 03:53 PM.
 
Old 07-20-2022, 08:36 AM   #13
SrChief
LQ Newbie
 
Registered: Jul 2022
Location: NC
Distribution: Mint Una
Posts: 9

Original Poster
Rep: Reputation: 0
The card is formatted for dos fat 32
After ejecting the card, it would not mount again. It mounts fine in mac OS so I know the card reader will handle it.
 
Old 07-20-2022, 08:45 AM   #14
SrChief
LQ Newbie
 
Registered: Jul 2022
Location: NC
Distribution: Mint Una
Posts: 9

Original Poster
Rep: Reputation: 0
So I reformatted the card from mac os to MS-DOS FAT. Shut the computer down and inserted the card and booted up in Linux mint and the card showed on the desktop.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
getting udev to mount a slow usb sdhc card on boot... stardotstar Linux - Hardware 6 12-01-2009 09:06 PM
How can I determine if my internal card reader is compatible with sdhc cards? ask Linux - Hardware 4 10-31-2008 10:00 AM
4GB SDHC doesn't mount in Mandriva 2008.0 Powerpack Tony Littlejohn Mandriva 3 10-08-2008 08:33 AM
Read only on SDHC EEEXubuntu install thatisandwas Linux - Newbie 9 08-11-2008 10:35 AM
How do I clone a 4Gb SDHC Card to another 4Gb SDHC Card lothario Linux - Software 3 07-22-2008 09:40 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 05:58 PM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration