Latest LQ Deal: Complete CCNA, CCNP & Red Hat Certification Training Bundle
Go Back > Forums > Linux Forums > Linux - Hardware
User Name
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?


  Search this Thread
Old 08-20-2004, 02:37 AM   #1
LQ Newbie
Registered: Sep 2003
Posts: 8

Rep: Reputation: 0
SCR335 SmarCard Reader on SuSE 8.1


I am trying to integrate SCR 335 USB SmartCard Reader from SCM Micro onto my SuSE 8.1 installation (running kernel 2.4.19). The USB drive is recognized by my installation, but I am unable to configure the SmartCard Reader Device.


Kernel Version 2.4.19
pcsc-lite version pcsc-lite-1.0.0

I am new to the SmartCard environment. Can somebody help me on this. I am also attaching the 'dmesg' output of my system. Urgent responses highly appreciated.


Linux version 2.4.19-4GB ( (gcc version 3.2.2) #1 Mon Jun 28 15:57:57 UTC 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 00000000000e8640 (reserved)
BIOS-e820: 00000000000e8640 - 00000000000e8840 (ACPI NVS)
BIOS-e820: 00000000000e8840 - 00000000000ec000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffe0000 (usable)
BIOS-e820: 000000001ffe0000 - 000000001fff0000 (ACPI data)
BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
0MB HIGHMEM available.
511MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 131040
zone(0): 4096 pages.
zone(1): 126944 pages.
zone(2): 0 pages.
ACPI disabled because your bios is from 1999 and too old
You can enable it with acpi=force
Building zonelist for node : 0
Kernel command line: splash=silent root=/dev/hda4 vga=791 apm=on
bootsplash: silent mode.
Initializing CPU#0
Detected 356.596 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 704.51 BogoMIPS
Memory: 514136k/524160k available (1606k kernel code, 9636k reserved, 576k data, 160k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030228
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xfee03, last bus=21
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router PIIX [8086/7110] at 00:05.0
PCI: Found IRQ 11 for device 00:0b.0
PCI: Found IRQ 11 for device 00:0b.1
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16)
mxt_scan_bios: enter
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 32760
aio_setup: sizeof(struct page) = 48
vesafb: framebuffer at 0xf0000000, mapped to 0xe080d000, size 8192k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at c000:8751
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... silenjpeg size 76934 bytes, found (1024x768, 57187 bytes, v3).
Got silent jpeg.
Got silent jpeg.
Console: switching to colour frame buffer device 101x30
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 00:05.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdcMA, hddio
hda: TOSHIBA MK1214GAP, ATA DISK drive
blk: queue c03b4020, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 23579136 sectors (12073 MB), CHS=1467/255/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 < hda5 > hda3 hda4
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 567k freed
VFS: Mounted root (ext2 filesystem).
hdc: attached ide-cdrom driver.
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (ide0(3,4)) for (ide0(3,4))
Warning, log replay starting on readonly filesystem
reiserfs: replayed 212 transactions in 54 seconds
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 160k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Removing [131051 135937 0x0 SD]..done
Removing [131051 135936 0x0 SD]..done
Removing [155 135921 0x0 SD]..done
Removing [155 135915 0x0 SD]..done
Removing [155 135914 0x0 SD]..done
Removing [155 135374 0x0 SD]..done
Removing [59686 17624 0x0 SD]..done
Removing [59686 17594 0x0 SD]..done
There were 8 uncompleted unlinks/truncates. Completed
LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded
Adding Swap: 1052248k swap-space (priority 42)
NTFS driver 2.1.1a [Flags: R/O MODULE].
NTFS volume version 3.0.
MSDOS FS: IO charset iso8859-1
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per conntrack
PCI: Found IRQ 11 for device 00:0c.0
PCI: Sharing IRQ 11 with 00:05.2
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 16:24:23 Jun 28 2004
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 11 for device 00:05.2
PCI: Sharing IRQ 11 with 00:0c.0
usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: new USB device 00:05.2-2, assigned address 2
usb.c: USB device 2 (vend/prod 0x4e6/0x5115) is not claimed by any active driver.
uhci.c: USB Universal Host Controller Interface driver v1.1
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hdc: packet command error: status=0x51 { DriveReady SeekComplete Error }
hdc: packet command error: error=0x50
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Invalid field in command packet -- (asc=0x24, ascq=0x00)
The failed "Start/Stop Unit" packet command was:
"1b 00 00 00 03 00 00 00 00 00 00 00 "
Error in command packet byte 4 bit 0
cdrom: open failed.
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:0b.0
PCI: Found IRQ 11 for device 00:0b.1
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000011
Yenta IRQ list 06b8, PCI irq11
Socket status: 30000007
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0820-0x08ff: clean.
cs: IO port probe 0x0800-0x080f: clean.
cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x0100-0x03af: excluding 0x200-0x207 0x378-0x37f
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)
eth0: MII link partner: 41e1
eth0: MII selected
eth0: media 100BaseT, silicon revision 5
eth0: Xircom: port 0x300, irq 3, hwaddr 00:10:A4:9C:04:1A
ttyS03 at port 0x02e8 (irq = 3) is a 16550A
eth0: MII link partner: 41e1
eth0: MII selected
eth0: media 100BaseT, silicon revision 5
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
Linux video capture interface: v1.00
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
eth0: no IPv6 routers present
Toshiba System Managment Mode driver v1.11 26/9/2001


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
HP Photosmart 7550 w/ Flash Card Reader on Suse 9.3. Card Reader and Print Sharing Desert Linux - Hardware 0 07-25-2005 09:25 PM
SuSE 9.3 & 5-in-1 Media Reader. bedi-beparwah SUSE / openSUSE 6 05-25-2005 02:33 AM
T42 with fingerprint reader for SUSE Beni SUSE / openSUSE 2 01-07-2005 05:23 PM
ho do I access my card reader - Suse 9.1 joel b Linux - Newbie 9 07-27-2004 01:21 PM
Suse 8.2 and sandisk cf/ms reader (sddr-77) Edlinux Linux - Hardware 2 07-08-2003 10:20 AM > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 05:06 PM.

Main Menu
Write for LQ is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration