kromberg |
12-31-2008 08:00 AM |
OK, a little more info now that I have been able to look at things again after Christmas.
Looks like the latest version of Fedora 9 install tries to use the HighPoint module rather than the sata_nv module. I have gotten Fedora up and installed on the system.
The drive is question is /dev/sdc.
In the dmesg out, there are numerous version of the following error:
Code:
ata20.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata20.00: BMDMA stat 0x5
ata20.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata20.00: status: { DRDY ERR }
ata20.00: error: { ABRT }
ata20.00: configured for UDMA/133
ata20: EH complete
Here is a copy of the lshw output:
Code:
H/W path Device Class Description
============================================================
system H8QM3
/0 bus H8QM3
/0/1 memory 64KiB BIOS
/0/3 processor Quad-Core AMD Opteron(tm) Processor 8354
/0/3/5 memory 512KiB L1 cache
/0/3/6 memory 2MiB L2 cache
/0/3/7 memory 2MiB L3 cache
/0/8 processor Quad-Core AMD Opteron(tm) Processor 8354
/0/8/9 memory 512KiB L1 cache
/0/8/a memory 2MiB L2 cache
/0/8/b memory 2MiB L3 cache
/0/c processor Quad-Core AMD Opteron(tm) Processor 8354
/0/c/d memory 512KiB L1 cache
/0/c/e memory 2MiB L2 cache
/0/c/f memory 2MiB L3 cache
/0/10 processor Quad-Core AMD Opteron(tm) Processor 8354
/0/10/11 memory 512KiB L1 cache
/0/10/12 memory 2MiB L2 cache
/0/10/13 memory 2MiB L3 cache
/0/27 memory 8GiB System Memory
/0/27/0 memory DIMM [empty]
/0/27/1 memory DIMM [empty]
/0/27/2 memory DIMM [empty]
/0/27/3 memory DIMM [empty]
/0/27/4 memory DIMM [empty]
/0/27/5 memory DIMM [empty]
/0/27/6 memory 1GiB DIMM Synchronous 333 MHz (3.0 ns)
/0/27/7 memory 1GiB DIMM Synchronous 333 MHz (3.0 ns)
/0/27/8 memory DIMM [empty]
/0/27/9 memory DIMM [empty]
/0/27/a memory DIMM [empty]
/0/27/b memory DIMM [empty]
/0/27/c memory DIMM [empty]
/0/27/d memory DIMM [empty]
/0/27/e memory 1GiB DIMM Synchronous 333 MHz (3.0 ns)
/0/27/f memory 1GiB DIMM Synchronous 333 MHz (3.0 ns)
/0/27/10 memory DIMM [empty]
/0/27/11 memory DIMM [empty]
/0/27/12 memory DIMM [empty]
/0/27/13 memory DIMM [empty]
/0/27/14 memory DIMM [empty]
/0/27/15 memory DIMM [empty]
/0/27/16 memory 1GiB DIMM Synchronous 333 MHz (3.0 ns)
/0/27/17 memory 1GiB DIMM Synchronous 333 MHz (3.0 ns)
/0/27/18 memory DIMM [empty]
/0/27/19 memory DIMM [empty]
/0/27/1a memory DIMM [empty]
/0/27/1b memory DIMM [empty]
/0/27/1c memory DIMM [empty]
/0/27/1d memory DIMM [empty]
/0/27/1e memory 1GiB DIMM Synchronous 333 MHz (3.0 ns)
/0/27/1f memory 1GiB DIMM Synchronous 333 MHz (3.0 ns)
/0/4 memory RAM memory
/0/100 bridge MCP55 LPC Bridge
/0/7 bus MCP55 SMBus
/0/2 bus MCP55 USB Controller
/0/2/1 usb2 bus OHCI Host Controller
/0/2.1 bus MCP55 USB Controller
/0/2.1/1 usb1 bus EHCI Host Controller
/0/9 scsi0 storage MCP55 IDE
/0/9/0.0.0 /dev/cdrom disk DVD RW AW-Q170A
/0/9/0.1.0 /dev/sda disk 120GB WDC WD1200JB-00G
/0/9/0.1.0/1 /dev/sda1 volume 196MiB EXT3 volume
/0/9/0.1.0/2 /dev/sda2 volume 111GiB Linux LVM Physical Volume partition
/0/5 storage MCP55 SATA Controller
/0/5.1 storage MCP55 SATA Controller
/0/5.2 scsi8 storage MCP55 SATA Controller
/0/5.2/0.0.0 /dev/sdc disk 200GB ST3200822AS
/0/6 bridge MCP55 PCI bridge
/0/101 bridge MCP55 PCI Express bridge
/0/102 bridge MCP55 PCI Express bridge
/0/102/0 bridge uPD720400 PCI Express - PCI/PCI-X Bridge
/0/102/0/3 eth0 network 82546GB Gigabit Ethernet Controller
/0/102/0/3.1 eth1 network 82546GB Gigabit Ethernet Controller
/0/102/0.1 bridge uPD720400 PCI Express - PCI/PCI-X Bridge
/0/102/0.1/1 bridge 21154 PCI-to-PCI Bridge
/0/102/0.1/1/0 bridge 21154 PCI-to-PCI Bridge
/0/102/0.1/1/0/0 scsi2 storage MegaRAID
/0/102/0.1/1/0/0/2.0.0 /dev/sdb disk 219GB LD 0 RAID5 209G
/0/102/0.1/1/0/0/2.0.0/1 /dev/sdb1 volume 204GiB Linux LVM Physical Volume partition
/0/102/0.1/1/1 storage ISP12160 Dual Channel Ultra3 SCSI Processor
/0/103 bridge MCP55 PCI Express bridge
/0/104 bridge Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration
/0/105 bridge Family 10h [Opteron, Athlon64, Sempron] Address Map
/0/106 bridge Family 10h [Opteron, Athlon64, Sempron] DRAM Controller
/0/107 bridge Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control
/0/108 bridge Family 10h [Opteron, Athlon64, Sempron] Link Control
/0/109 bridge Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration
/0/10a bridge Family 10h [Opteron, Athlon64, Sempron] Address Map
/0/10b bridge Family 10h [Opteron, Athlon64, Sempron] DRAM Controller
/0/10c bridge Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control
/0/10d bridge Family 10h [Opteron, Athlon64, Sempron] Link Control
/0/10e bridge Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration
/0/10f bridge Family 10h [Opteron, Athlon64, Sempron] Address Map
/0/110 bridge Family 10h [Opteron, Athlon64, Sempron] DRAM Controller
/0/111 bridge Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control
/0/112 bridge Family 10h [Opteron, Athlon64, Sempron] Link Control
/0/113 bridge Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration
/0/114 bridge Family 10h [Opteron, Athlon64, Sempron] Address Map
/0/115 bridge Family 10h [Opteron, Athlon64, Sempron] DRAM Controller
/0/116 bridge Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control
/0/117 bridge Family 10h [Opteron, Athlon64, Sempron] Link Control
/0/0 memory RAM memory
/0/a memory RAM memory
/0/b bus MCP55 SMBus
/0/118 bridge MCP55 PCI Express bridge
/0/119 bridge MCP55 PCI Express bridge
/0/11a bridge MCP55 PCI Express bridge
/0/11a/0 display NV44 [Quadro NVS 285]
Here is a copy of the lspci output:
Code:
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3)
Kernel modules: ck804xrom
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
Kernel driver in use: pata_amd
Kernel modules: ata_generic, pata_acpi, pata_amd
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
Kernel driver in use: sata_nv
Kernel modules: ata_generic, sata_nv, pata_acpi
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
Kernel driver in use: sata_nv
Kernel modules: ata_generic, sata_nv, pata_acpi
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
Kernel driver in use: sata_nv
Kernel modules: ata_generic, sata_nv, pata_acpi
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control
00:19.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control
00:1a.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:1a.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map
00:1a.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller
00:1a.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control
00:1a.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control
00:1b.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:1b.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map
00:1b.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller
00:1b.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control
00:1b.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control
03:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
Kernel modules: shpchp
03:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 07)
Kernel modules: shpchp
04:03.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
Kernel driver in use: e1000
Kernel modules: e1000
04:03.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet Controller (rev 03)
Kernel driver in use: e1000
Kernel modules: e1000
05:01.0 PCI bridge: Intel Corporation 21154 PCI-to-PCI Bridge
Kernel modules: shpchp
06:00.0 PCI bridge: Intel Corporation 21154 PCI-to-PCI Bridge
Kernel modules: shpchp
06:01.0 SCSI storage controller: QLogic Corp. ISP12160 Dual Channel Ultra3 SCSI Processor (rev 06)
Kernel modules: qla1280
07:00.0 RAID bus controller: American Megatrends Inc. MegaRAID (rev 20)
Kernel driver in use: megaraid
Kernel modules: megaraid_mbox
80:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
80:01.0 RAM memory: nVidia Corporation MCP55 LPC Bridge (rev a3)
Kernel modules: ck804xrom
80:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
80:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
80:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
80:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
83:00.0 VGA compatible controller: nVidia Corporation NV44 [Quadro NVS 285] (rev a1)
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
And here is a bit of the dmesg out:
Code:
ata14.00: disabled
sd 14:0:0:0: [sdc] Synchronizing SCSI cache
sd 14:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
sd 14:0:0:0: [sdc] Stopping disk
sd 14:0:0:0: [sdc] START_STOP FAILED
sd 14:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK,SUGGEST_OK
sata_nv 0000:00:05.2: PCI INT C disabled
sata_nv 0000:00:05.1: PCI INT B disabled
sata_nv 0000:00:05.0: PCI INT A disabled
sata_nv 0000:00:05.0: version 3.5
sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
sata_nv 0000:00:05.0: setting latency timer to 64
scsi15 : sata_nv
scsi16 : sata_nv
ata15: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xac00 irq 21
ata16: SATA max UDMA/133 cmd 0xb080 ctl 0xb000 bmdma 0xac08 irq 21
sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
sata_nv 0000:00:05.1: setting latency timer to 64
scsi17 : sata_nv
scsi18 : sata_nv
ata17: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa080 irq 20
ata18: SATA max UDMA/133 cmd 0xa480 ctl 0xa400 bmdma 0xa088 irq 20
sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:05.2: setting latency timer to 64
scsi19 : sata_nv
scsi20 : sata_nv
ata19: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 23
ata20: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 23
ata20: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata20.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
ata20.00: 390721968 sectors, multi 16: LBA48
ata20.00: configured for UDMA/133
scsi 20:0:0:0: Direct-Access ATA ST3200822AS 3.01 PQ: 0 ANSI: 5
sd 20:0:0:0: [sdc] 390721968 512-byte hardware sectors (200050 MB)
sd 20:0:0:0: [sdc] Write Protect is off
sd 20:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 20:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 20:0:0:0: [sdc] 390721968 512-byte hardware sectors (200050 MB)
sd 20:0:0:0: [sdc] Write Protect is off
sd 20:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 20:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc:<3>ata20.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata20.00: BMDMA stat 0x5
ata20.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata20.00: status: { DRDY ERR }
ata20.00: error: { ABRT }
ata20.00: configured for UDMA/133
ata20: EH complete
ata20.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata20.00: BMDMA stat 0x5
ata20.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
ata20.00: status: { DRDY ERR }
ata20.00: error: { ABRT }
ata20.00: configured for UDMA/133
Any help would be great in figuring this out.
Keith
|