hello,
the saa7134 driver accepts a number of card identifier options upon loading. the best way of doing this is to make an entry in your /etc/modules.conf file. below is a sample of my modules.conf file, relevant to the saa7134 driver for the philips reference card -
Code:
options saa7134 card=1
alias /dev/v4l saa7134
options bttv card=65
i would also recommend that you do a
rather than using insmod, because modprobe will take care of dependant modules for you. for your interest, here is a list of the tv card-specific modules loaded on my system; yours should look the same -
Code:
tuner 10856 1 (autoclean)
saa7134 62868 0 (autoclean)
video-buf 11064 0 (autoclean) [saa7134]
i2c-core 15492 0 (autoclean) [tuner saa7134]
v4l2-common 2528 0 (autoclean) [saa7134]
v4l1-compat 11752 0 (autoclean) [saa7134]
videodev 6272 2 (autoclean) [saa7134]
i hope this helps. i have to add that i found the whole thing a bit bizarre and there was a lot of trial and error involved, but it all seems good on my system now...