Hi,

While installing RH 8 (kernel 2.4.18-14) my networkcard (a VIA VT6105 Rhine-III) was properly detected and worked like a charm !

Because of troubles with CDROM support on this kernel version i migrated to the latest stable version (kernel 2.4.19).
My cdrom troubles where over, but now my eth0 will not initialise !

Please could someone help me ?

Thanx !!

Max


------------ dmesg ------------ (removed stuff that wasn't related to eth0)
Linux version 2.4.19 (root@localhost.localdomain) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #9 SMP Sun Oct 27 22:42:20 CET 2002
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 3 at 0xFEC00000.
Processors: 1
Kernel command line: auto BOOT_IMAGE=linux ro root=308 BOOT_FILE=/boot/vmlinuz-2.4.19 noapic
via-rhine.c:v1.10-LK1.1.14 May-3-2002 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6105 Rhine-III at 0xdfffff00, 00:40:f4:5f:9b:ca, IRQ 10.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
eth0: Setting full-duplex based on MII #1 link partner capability of 45e1.
via-rhine.c:v1.10-LK1.1.14 May-3-2002 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
via-rhine.c:v1.10-LK1.1.14 May-3-2002 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
via-rhine.c:v1.10-LK1.1.14 May-3-2002 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
---------------------- end of dmesg ---------------------------