Hi folks,

I'm fiddling around with my first Linux-system, trying to set up a
DVR. I'm running Redhat 9, kernel 2.4.20-19.9 , using a Hauppage WinTV Go! analog TV card, and a Hauppauge WinTV NOVA digital TV card. The application I'm trying to start is tvTime.

I went through all the moves installing different modules. When I
finally came to the bttv-module the system refused to install it (see
message further on). I removed the digital TV card from the system in order to simplify the configurations a bit, but it still shows up in
the hardware listing.

Since this is my first time working heavily under the hood of a
Linux-system I feel rather confused! Could some kind soul please tell me what I should do next, and/or what I'm missing. All help will be much appreciated. Thanks in advance.

Zup

My lsmod-output looks like this:

[root video]# lsmod
Module Size Used by Tainted: P
i2c-algo-bit 8776 0
i2c-core 19108 0 [i2c-algo-bit]
cmpci 35400 0 (autoclean)
soundcore 6468 4 (autoclean) [cmpci]
agpgart 47968 3 (autoclean)
nvidia 1766848 11 (autoclean)
parport_pc 18788 1 (autoclean)
lp 8804 0 (autoclean)
parport 36800 1 (autoclean) [parport_pc lp]
autofs 13108 0 (autoclean) (unused)
8139too 18120 1
mii 3976 0 [8139too]
ipt_REJECT 3992 6 (autoclean)
iptable_filter 2412 1 (autoclean)
ip_tables 14648 2 [ipt_REJECT iptable_filter]
keybdev 2912 0 (unused)
mousedev 5428 1
hid 21892 0 (unused)
input 5792 0 [keybdev mousedev hid]
usb-ohci 21320 0 (unused)
usbcore 78272 1 [hid usb-ohci]
ext3 69984 2
jbd 51508 2 [ext3]

When I try to add the bttv-module I get the following message:

[root video]# modprobe bttv
/lib/modules/2.4.20-19.9/kernel/drivers/media/video/bttv.o:
init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-19.9/kernel/drivers/media/video/bttv.o: insmod
/lib/modules/2.4.20-19.9/kernel/drivers/media/video/bttv.o failed
/lib/modules/2.4.20-19.9/kernel/drivers/media/video/bttv.o: insmod
bttv failed

My lspci-printout looks like this:

[root video]# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 745 Host (rev
01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual
PCI-to-PCI bridge (AGP)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513
(LPC Bridge)
00:02.2 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
Controller (rev 07)
00:02.3 USB Controller: Silicon Integrated Systems [SiS] SiS7001 USB
Controller (rev 07)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
(rev d0)
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738
(rev 10)
00:09.0 Multimedia video controller: Conexant: Unknown device 8800
(rev 03)
00:09.1 Multimedia controller: Conexant: Unknown device 8811 (rev 03)
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2
MX/MX 400] (rev b2)