read external hard drive
K Ive searched and searched, but I can't find the answer to this...
Why won't linux recognize my external usb hard drive???? Its a maxtor 5000DV and it has 1 partition on it. when i do /sbin/fdisk -l, this is what i get: Disk /dev/hda: 60.0 GB, 60011642880 bytes 255 heads, 63 sectors/track, 7296 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 5142 41303083+ 7 HPFS/NTFS /dev/hda2 5143 7296 17302005 f Win95 Ext'd (LBA) /dev/hda5 5143 5208 530113+ 82 Linux swap /dev/hda6 5209 5274 530113+ 83 Linux /dev/hda7 5275 7296 16241683+ 83 Linux all that is my internal hard drive. I'm running a version of Redhat 9 specialized for my school. Its called athena, but it very much like red hat 9. i think i need to install some drivers or something because I think i got this working on fedora before, but i can't remember what i did.... can ne1 help???? thanks |
First, do you have mass storage installed in your kernel or as a module?
Instead of fdisk run lsusb to see your usb devices. |
Yea....my drive is in there. here's the reading:]
Bus 004 Device 002: ID 0d49:5020 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 Interface bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0d49 idProduct 0x5020 bcdDevice 1.00 iManufacturer 1 Maxtor iProduct 3 5000DV v01.00.00 iSerial 2 Y4237HNE bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type none wMaxPacketSize 512 bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type none wMaxPacketSize 512 bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type none wMaxPacketSize 2 bInterval 9 Language IDs: (length=4) 0409 English(US) |
Run # lsusb and not # lsusb -v for a listing and not all that verbose information.
Since I'm using Slack, YMMV -- however, if you don't already have a directory under /mnt such as /mnt/hd or /mnt/usbhd then you should make one. Then as su issue -> # mount /dev/sda1 /mnt/usbhd (your mount point) and see if that does it. Then issue -> # ls -alc /mnt/usbhd (your mount point) and see what data that returns. You should get something like this -> Code:
bash-2.05b# mount /dev/sda1 /mnt/usbhd bash-2.05b# umount /mnt/usbhd (notice /dev/sda1 not listed and no n following first u) NB: If you're going to use this drive on a regular basis, I'd suggest creating a mount point in /etc/fstab so that you can mount it as a normal user and not as su, such as -> Code:
/dev/sda1 /mnt/hd vfat user,umask=1000,rw,auto 0 0 |
Does the output of the command lsmod show any USB modules being loaded?
Does the output of dmesg show any errors for your USB device? |
directory of . listing year 1970
|
mount.nfs,
Your replying to a 18 year old thread where the OP has not be active for 17 years and the information you are replying about was not even the OPs. |
All times are GMT -5. The time now is 05:24 PM. |