QUAD ethernet
 

Hello

I would like to ask for the advice of the communauty :

I need to buy a Debian compatible Quad ethernet card, which would be able to manage ADSL2+, like PPPoE connections and able to be plugged on a M2N-MX SE motherboard ?

For the time I could only find that kind of stuff :

http://www.amazon.fr/Intel-1000-Quad...5823284&sr=8-3

Expensive so I'd like to be sure before buying.. ;)

Thanks

The spec of your motherboard says you have two PCI slots and one PCIe 16 channel slot( Which would be used for your video card) so the quad card you have indicated wouldn't fit your system anyway as it's a 4 channel PCIe board, you've nowhere to plug it. :( You'll need a PCI Quad nic

Play Bonny! :hattip:

Oh! and welcome to the LQ forums! :D

See the intel site. I think went I was there a long time ago there was some linux support.

Those card are good because they are really meant for enterprise level work. They have many features beyond what you'd suspect.

Hi

Actually I use the onboard graphic card so it shouldnt be a issue. :)


I had a look already.. Features beyond what I suspect and for some, even beyond my understanding.. :newbie:

Thats why I'd really appreciate some more feedback about their configuration within debian or linux more generally speaking ..


But thanks to answer anyway. ;)

up ?
 

Please.. :cry: :rolleyes:

Do you have a reason to purchase such a high tech card?

Hi Jefro
 

I got 2 "loosy" connections : 1 ADSL+2 and 1 PPPoE, and 3 computers to feed.

I would like to be able to switch between the 2 connections, according to their availability in real time.

So I guess I need 2 inputs and 2 outputs at least..

To me, The QUAD seemed appropriate for such a job.

Even if I just understood that I will need to buy an internal modem anyway.. :rolleyes:

Why ? Do you think about another solution ?

They make dedicated devices to do that. Much cheaper. Also you could setup a virtual or real computer to do that. I think a common one is a bsd version. Might be possible to set that up in one of the computers you have already.

LOL using quad ethernet for ADSL, man read in wikipedia what's that for. It's for ethernet channels between hosts.
Buy a goddamn homie router...

Actually..
 

I've found good advice on the french forum for debian. We concluded on this :

1 QUAD-Port RealTek RTL8100C for 234$ with the antenna..

1 ADSL2+ PCI card for 46.97 euros

All for around 215 euros, nearly half the price of the initial guess. ;)

What do you mean by bsd version ? I'm quite lost with your saying..

Because I will still need 2 physical inputs for the providers connexions and 2 physical outputs for my 2 others computers.. ? No ? :scratch:

You can purchase a dedicated hardware device that is exactly used for that purpose. I have seen them for under $100 us. http://airetechit.co.uk/store/index....221&livemode=1


You can make a computer either real or virtual that does what you need. It is a linux or bsd OS with software and settings already to do what you want. http://doc.pfsense.org/index.php/Mul...Load_Balancing

No you don't need two outputs. One should do unless you have some odd setup. A router or a hub may work.

Oh ok.. !
 

It's actually what I wanted to avoid : too many cables and boxes on my desk. But the second link is pretty useful. Thanks for this. :hattip: