LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices


Reply
  Search this Thread
Old 01-21-2008, 11:38 PM   #1
neograymatter
LQ Newbie
 
Registered: Jan 2008
Posts: 0

Rep: Reputation: 0
Problem with Broadcom 4401 "b44: eth0: BUG! ..."


Recently decided to put OpenSuse 10.3 on my laptop (Dell Inspiron 1100), after a few hitchs (most of them solved by reading these forums) I finally have it up and running.

However I cannot connect to my university network.
Whenever I click wired network in Knetwork manager, it sets itself up with the local link ip: 169.254.174.70


Heres the ethernet in my machine:
02:01.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)

Theres a nice string of 300 and some odd "b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set." errors in my dmesg, that may mean something to someone more knowledgable than myself.

Theres actually alot more of those b44 errors than listed below, but a had to edit it to fit inside the 25000 character max

dmesg:
Quote:
Linux version 2.6.22.5-31-default (geeko@buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f7c9000 (usable)
BIOS-e820: 000000000f7c9000 - 0000000010000000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
247MB LOWMEM available.
Entering add_active_range(0, 0, 63433) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 63433
HighMem 63433 -> 63433
early_node_map[1] active PFN ranges
0: 0 -> 63433
On node 0 totalpages: 63433
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 463 pages used for memmap
Normal zone: 58874 pages, LIFO batch:15
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000FDF00, 0014 (r0 DELL )
ACPI: RSDT 0F7F0000, 0028 (r1 DELL CPi R 27D40A12 ASL 61)
ACPI: FACP 0F7F0400, 0074 (r1 DELL CPi R 27D40A12 ASL 61)
ACPI: DSDT 0F7F0C00, 25D8 (r1 INT430 SYSFexxx 1001 MSFT 100000E)
ACPI: FACS 0F7FF800, 0040
ACPI: PM-Timer IO Port: 0x808
Allocating PCI resources starting at 20000000 (gap: 10000000:eeda0000)
Built 1 zonelists. Total pages: 62938
Kernel command line: root=/dev/disk/by-id/scsi-SATA_FUJITSU_MHT2030_NN15T3A1A60R-part1 vga=0x317 resume=/dev/sda5 splash=silent
bootsplash: silent mode.
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (011fc000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 2192.941 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 243560k/253732k available (1825k kernel code, 9616k reserved, 764k data, 228k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffdf4000 - 0xfffff000 (2092 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0000000 - 0xff7fe000 ( 759 MB)
lowmem : 0xc0000000 - 0xcf7c9000 ( 247 MB)
.init : 0xc038e000 - 0xc03c7000 ( 228 kB)
.data : 0xc02c86ed - 0xc0387964 ( 764 kB)
.text : 0xc0100000 - 0xc02c86ed (1825 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4390.00 BogoMIPS (lpj=8780011)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebf9ff 00000000 00000000 0000b080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Unpacking initramfs... done
Freeing initrd memory: 4027k freed
ACPI: Core revision 20070126
Parsing all Control Methods:
Table [DSDT](id 0001) - 368 Objects with 64 Devices 151 Methods 5 Regions
tbxface-0587 [00] tb_load_namespace : ACPI Tables successfully acquired
ACPI: setting ELCR to 0200 (from 0800)
evxfevnt-0091 [00] enable : Transition to ACPI mode successful
CPU0: Intel(R) Pentium(R) 4 CPU 2.20GHz stepping 09
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfcfae, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9
evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 7 Wake, Enabled 2 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:..............................................
Initialized 5/5 Regions 7/8 Fields 21/22 Buffers 13/22 Packages (377 nodes)
Initializing Device/Processor/Thermal objects by executing _INI methods:...
Executed 3 _INI methods requiring 0 _STA executions (examined 68 objects)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0880-08bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xc0000-0xcbfff could not be reserved
pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:02: ioport range 0x800-0x805 has been reserved
pnp: 00:02: ioport range 0x808-0x80f has been reserved
pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
pnp: 00:03: ioport range 0x806-0x807 has been reserved
pnp: 00:03: ioport range 0x810-0x85f has been reserved
pnp: 00:03: ioport range 0x860-0x87f has been reserved
pnp: 00:03: ioport range 0x880-0x8bf has been reserved
pnp: 00:03: ioport range 0x8c0-0x8df has been reserved
pnp: 00:08: ioport range 0x900-0x97f has been reserved
pnp: 00:0b: ioport range 0x7b0-0x7bb has been reserved
pnp: 00:0b: ioport range 0x7c0-0x7df has been reserved
pnp: 00:0b: ioport range 0xbb0-0xbbb has been reserved
pnp: 00:0b: ioport range 0xbc0-0xbdf has been reserved
pnp: 00:0b: ioport range 0xfb0-0xfbb has been reserved
pnp: 00:0b: ioport range 0xfc0-0xfdf has been reserved
pnp: 00:0b: ioport range 0x13b0-0x13bb has been reserved
pnp: 00:0b: ioport range 0x13c0-0x13df has been reserved
Time: tsc clocksource has been installed.
PCI: Bus 3, cardbus bridge: 0000:02:04.0
IO window: 0000d000-0000d0ff
IO window: 0000d400-0000d4ff
PREFETCH window: 20000000-23ffffff
MEM window: f8000000-fbffffff
PCI: Bridge: 0000:00:1e.0
IO window: d000-efff
MEM window: f8000000-fdffffff
PREFETCH window: 20000000-23ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:02:04.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1200958632.404:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
vesafb: framebuffer at 0xe0000000, mapped to 0xd0080000, using 6144k, total 8000k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at 00ff:44f0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
bootsplash: silentjpeg size 78436 bytes
bootsplash: ...found (1024x768, 28133 bytes, v3).
Console: switching to colour frame buffer device 124x44
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to NOHz mode on CPU #0
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
floppy0: no floppy controllers found
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
input: PC Speaker as /class/input/input1
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, caps: 0x804713/0x0
input: SynPS/2 Synaptics TouchPad as /class/input/input2
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 228k freed
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM] (61 C)
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.11
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001bfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001bfa8 irq 15
ata1.00: ATAPI: TOSHIBA DVD-ROM SD-C2612, 1D21, max UDMA/33
ata1.00: configured for UDMA/33
ata2.00: ATA-6: FUJITSU MHT2030AT, 009B, max UDMA/100
ata2.00: 58605120 sectors, multi 8: LBA
ata2.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-C2612 1D21 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access ATA FUJITSU MHT2030A 009B PQ: 0 ANSI: 5
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
usb usb1: new device found, idVendor=0000, idProduct=0000
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
usb usb2: new device found, idVendor=0000, idProduct=0000
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sd 1:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
usb usb3: new device found, idVendor=0000, idProduct=0000
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.22.5-31-default uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
sda1 sda2 < sda5 > sda3
sd 1:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf6f7fc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: new device found, idVendor=0000, idProduct=0000
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.22.5-31-default ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.7
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
scsi 0:0:0:0: Attached scsi generic sg0 type 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
intel_rng: FWH not detected
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 830M Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xe0000000
iTCO_vendor_support: vendor-support=0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
i810_smbus 0000:00:02.0: i810/i815 i2c device found.
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: AC Adapter [AC] (on-line)
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc_cmos: probe of 00:06 failed with error -16
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1f.5 to 64
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
ACPI: Battery Slot [BAT0] (battery present)
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /class/input/input5
ACPI: Sleep Button (CM) [SBTN]
intel8x0_measure_ac97_clock: measured 54197 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1f.6 to 64
Yenta: CardBus bridge found at 0000:02:04.0 [1028:0149]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:04.0, mfunc 0x00001002, devctl 0x64
Yenta: ISA IRQ mask 0x0478, PCI irq 11
Socket status: 30000007
Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
cs: IO port probe 0xd000-0xefff: clean.
pcmcia: parent PCI bridge Memory window: 0xf8000000 - 0xfdffffff
pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff
b44.c:v1.01 (Jun 16, 2006)
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 7 (level, low) -> IRQ 7
eth0: Broadcom 4400 10/100BaseT Ethernet 00:0b:db:e6:f9:99
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Adding 746980k swap on /dev/sda5. Priority:-1 extents:1 across:746980k
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
AppArmor: AppArmor initialized
audit(1200958654.405:2): type=1505 info="AppArmor initialized" pid=1786
powernow: This module only works with AMD K7 CPUs
b44: eth0: Link is up at 10 Mbps, half duplex.
b44: eth0: Flow control is off for TX and off for RX.
mtrr: no more MTRRs available
NET: Registered protocol family 17
audit(1200973078.103:3): audit_pid=2640 old=0 by auid=4294967295
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
bootsplash: status on console 0 changed to on
eth0: no IPv6 routers present
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
eth0: no IPv6 routers present
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
b44: eth0: BUG! Timeout waiting for bit 00002000 of register 21c to set.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
Broadcom b44.ko support Dell Inspiron 5160 hocky98 Linux - Networking 2 11-01-2006 06:35 PM
Broadcom 4401 Nic problems diemorph Linux - Hardware 2 09-16-2004 08:00 AM
Broadcom 4401 Not working alexsh Linux - Hardware 2 08-26-2004 10:09 AM
Broadcom 4401 Windows/Linux Problem... Bobmeister Fedora 1 03-06-2004 07:03 PM
Broadcom 4401 with Mandrake 9.0 Install oskar_27de Linux - Networking 2 05-27-2003 03:27 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware

All times are GMT -5. The time now is 11:29 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration