LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (https://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   Printer Lexmark z1320 doesn't work, Fedora 7 (https://www.linuxquestions.org/questions/linux-hardware-18/printer-lexmark-z1320-doesnt-work-fedora-7-a-588028/)

odcheck 09-28-2007 11:36 AM

Printer Lexmark z1320 doesn't work, Fedora 7
 
Hi All,

maybe somebody can help me...

I've got a Lexmark InkJet Printer z1320 connected via USB.
I can't get it to work.

Distribution: Fedora 7 32bit
Kernel: 2.6.22.7-85.fc7 i686

I tried with all the generic drivers listed.
Also with all of the z-series.
I had kind of success with z52, z53 driver.
The success was that something happened... the paper
printed... plain. But it pulls the paper ha ha ha
gutenprint also doesn't work. And openprinting.org wasn't also
no help.

Code:

cat /var/log/messages
Sep 28 17:38:51 machine kernel: usb 1-1: USB disconnect, address 3
Sep 28 17:38:51 machine kernel: drivers/usb/class/usblp.c: usblp0: removed
Sep 28 17:38:55 machine kernel: usb 1-2: USB disconnect, address 4

Does anybody know a compatible driver that may work?

phantom_cyph 09-28-2007 11:45 AM

Lexmark's support of linux is almost none existent. I have a Z611 that is just a simple color printer, and it won't work either. The only way I think is using um...ndswrapper or something...I can't remember.

DCOH 09-28-2007 08:51 PM

I have a Lexmark Z611 that has worked fine with Fedora 5 thru Fedora 8Test2 there is a How -to in the Fedora Forums to install The Lexmark Z611 using the rpms and cups but you also have to install libstdc++-33 to make it print.

lazlow 09-28-2007 10:34 PM

I have a z600 too. It ran fine Fc4-F7. It is retired to a shelf now (cartridges cost more than I gave for the printer when it was new).

phantom_cyph 09-29-2007 06:31 AM

Quote:

Originally Posted by DCOH (Post 2907090)
I have a Lexmark Z611 that has worked fine with Fedora 5 thru Fedora 8Test2 there is a How -to in the Fedora Forums to install The Lexmark Z611 using the rpms and cups but you also have to install libstdc++-33 to make it print.

I would greatly appreciate it if you could point me to where that is. It gets annoying not having a printer.

pixellany 09-29-2007 09:04 AM

I have usually been able to find things like this by simply typing the name in Google. Here one of many hits: http://rpm.pbone.net/index.php3/stat....i386.rpm.html

lazlow 09-29-2007 12:36 PM

This one is for gentoo but it gives you the idea.

http://gentoo-wiki.com/Lexmark_Printers

DCOH 09-29-2007 07:45 PM

I will have to go back to the Fedora Forum and find it, then I'll post the link, I printed it off the forum back when I was using F5 and just keep it in my notes.

DCOH 09-29-2007 08:24 PM

Here is the link you need for the How-Tohttp://forums.fedoraforum.org/showthread.php?t=107354
Hope this Helps I use the driver from Lexmark CJLZ600LE-Cups-1.0-1.Tar.gz I'm now using it in Fedora 8Test 2.
The same how-to worked with the Lexmark Z35 driver DON"T FORGET TO install the libstdc++-33


All times are GMT -5. The time now is 09:33 AM.