Hi,

Kernel 2.4.20 / Debian Linux Unstable (latest packages, but self-build kernel with built-in SCSI host driver 'aic7xxx')

I just got a Pioneer 305S in my Linux box. When I startup I got these messages around the SCSI host initialization:

ahc_pci:2:5:0: Host Adapter Bios disabled. Using default SCSI device parameters
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8
<Adaptec 2902/04/10/15/20/30C SCSI adapter>
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs

Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:0): 10.000MB/s transfers (10.000MHz, offset 15)
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:1): 10.000MB/s transfers (10.000MHz, offset 15)
(scsi0:A:2:0): parity error detected in Status phase. SEQADDR(0x1be) SCSIRATE(0x0)
Vendor: HP Model: HP35470A Rev: T503
Type: Sequential-Access ANSI SCSI revision: 02
(scsi0:A:3): 5.000MB/s transfers (5.000MHz, offset 8)
Vendor: IOMEGA Model: ZIP 100 Rev: E.08
Type: Direct-Access ANSI SCSI revision: 02
Vendor: TEAC Model: CD-ROM CD-532S Rev: 1.0A
Type: CD-ROM ANSI SCSI revision: 02
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
(scsi0:A:6): 10.000MB/s transfers (10.000MHz, offset 15)

The parity error is new since I have connected the DVD ROM in my small SCSI tower and setup the ID to 7.

Any ideas? Or if you need more info, let me also know it! :-)